Template:Infobox military installation/doc
 | This is a documentation subpage for Template:Infobox military installation. It may contain usage information, categories and other content that is not part of the original template page. |
 | This template uses Lua: |
Usage
| Loring Air Force Base | |||||||||
|---|---|---|---|---|---|---|---|---|---|
Limestone Air Force Base | |||||||||
| Limestone and Caswell, Maine in United States | |||||||||
 USGS 1970 Aerial Photo | |||||||||
 Logo of Air Combat Command | |||||||||
| Site information | |||||||||
| Type | Air Force Base | ||||||||
| Owner | United States Air Force | ||||||||
| Operator | 42nd Bomb Wing | ||||||||
| Open to the public | Yes | ||||||||
| Stations | Caribou Air Force Station (East Loring), Caswell Air Force Station | ||||||||
| Location | |||||||||
  Loring AFB (KLIZ) Location of Loring AFB | |||||||||
 | |||||||||
| Coordinates | 46°56′59″N 67°53′20″W / 46.94972°N 67.88889°W | ||||||||
| Area | 9,000 acres (3,600 ha; 14 sq mi) | ||||||||
| Site history | |||||||||
| Built | 1947–1953 | ||||||||
| Built by | United States Army Corps of Engineers | ||||||||
| In use | 1950–1994 | ||||||||
| Fate | Mainly intact, partial demolition | ||||||||
| Events | Cold War | ||||||||
| Garrison information | |||||||||
| Current commander | Robert J. Pavelko | ||||||||
| Garrison | 42nd Bomb Wing | ||||||||
| Occupants | 69th Bombardment Squadron, 70th Bombardment Squadron, 75th Bombardment Squadron, 42d Air Refueling Squadron, 407th Air Refueling Squadron, 2192nd Communications Squadron, 101st Fighter Squadron | ||||||||
| Airfield information | |||||||||
| Identifiers | IATA: KLIZ, ICAO: LIZ | ||||||||
| Elevation | 746 feet (227 m) AMSL | ||||||||
| |||||||||
A military installation infobox may be used to summarize information about a military structure or facility, such as a fortification or military base.
The infobox should be added using the {{Infobox military installation}} template, as shown below:
{{Infobox military installation
| name =
| ensign =
| ensign_size =
| native_name =
| partof = <!-- for elements within a larger site -->
| location =
| nearest_town = <!-- used in military test site infobox -->
| country =
| image =
| alt =
| caption =
| image2 = <!--secondary image, major command emblems for airfields -->
| alt2 =
| caption2 =
| coordinates = <!-- {{Coord}} -->
| gridref =
| type =
| image_map =
| image_mapsize =
| image_map_alt =
| image_map_caption =
| pushpin_map =
| pushpin_mapsize =
| pushpin_map_alt =
| pushpin_map_caption =
| pushpin_relief =
| pushpin_image =
| pushpin_label =
| pushpin_label_position =
| pushpin_mark =
| pushpin_marksize =
| mapframe = yes<!-- see below for more mapframe parameters -->
| code = <!--facility/installation code -->
| site_area = <!-- area of site m2, km2 square mile etc -->
| floor_area =
| height = <!-- height of tallest part, not above sea level -->
| length = <!-- for border fences or other DMZs -->
| ownership = <!-- government department such as the MoD or the United States DoD -->
| operator = <!-- where different from ownership such as the RAF or the USAF -->
| controlledby = <!-- such as RAF Bomber Command or the Eighth Air Force -->
| open_to_public = <!-- for out of use sites/sites with museums etc -->
| condition =
| site_other_label = <!-- for renaming "Other facilities" in infobox -->
| site_other = <!-- for other sorts of facilities – radar types etc -->
| website =
| built = <!-- {{Start date|YYYY}} -->
| built_for =
| builder =
| architect =
| used = <!--{{End date|1946}} -->
| materials =
| fate = <!--changed from demolished parameter-->
| demolished =
| battles =
| events =
| current_commander = <!-- current commander -->
| past_commanders = <!-- past notable commander(s) -->
| garrison = <!-- such as the 25th Bombardment Group -->
| occupants = <!-- squadrons only -->
| designations =
| nrhp =
| footnotes = <!-- catchall in case it's needed to preserve something in infobox that doesn't work in new code -->
}}
The following supplemental blocks may be copied into the template above as needed, just prior to the "footnotes" parameter.
Test sites
<!-- begin test site information -->
| subcritical_tests =
| nuclear_tests =
| thermonuclear_tests =
| other_tests_label = <!-- changed from "Other tests" to wording of your choice -->
| other_tests =
| remediation =
| image3 =
| alt3 =
| caption3 =
<!-- end test site information -->
Airfields
<!-- begin airfield information -->
| IATA =
| ICAO =
| FAA =
| TC =
| LID =
| GPS =
| WMO =
| elevation = <!-- {{Convert| |m|0}} -->
| r1-number =
| r1-length = <!-- {{Convert| |m|0}} -->
| r1-surface =
| h1-number =
| h1-length = <!-- {{Convert| |m|0}} -->
| h1-surface =
| airfield_other_label = <!-- for renaming "Other facilities" in infobox -->
| airfield_other = <!-- for other sorts of airfield facilities -->
<!-- end airfield information -->
Parameters
[edit]Note: When using parameters, avoid the ambiguous abbreviation "N/A", and instead use "unknown" or "none". If a parameter is not applicable, leave it blank and it will not be displayed. All subjective or qualitative judgements and numerical quantities or statistics must be cited to a reliable source (see WP:MILMOS#CITE).
- name – the name of the installation or structure.
- ensign – optional – a small ensign image used by the installation.
- ensign_size – optional – size for ensign image.
- native_name – optional – the name of the installation in the language(s) of the country which built it, or in which it is located.
- partof – optional – the larger complex the given installation is part of, if any. For proper grammar, it may be necessary to insert "the" before the name used here.
- location – the geographical location of the installation.
- image – optional – an image of the installation. The image should be given in the form Example.jpg; other values can be inserted in the following parameters.
- image_size – optional – width of the image in pixels (px), e.g., "150"; defaults to "220".
- alt – optional – alt text for the image; see Wikipedia:Alternative text for images.
- caption – optional – the text to be placed below the image.
- image2 – optional – a second image of the installation. The image should be given in the form Example.jpg; other values can be inserted in the following parameters.
- image2_size – optional – width of the second image in pixels (px), e.g., "150"; defaults to "220".
- alt2 – optional – alt text for the second image; see Wikipedia:Alternative text for images.
- caption2 – optional – the text to be placed below the second image.
- map_type – optional – the base map to be used for the location map, e.g., "Scotland"; see {{Location map}} for more details.
- map_relief – optional – set to any non-blank value to use a relief map (if available).
- map_size – optional – width of the location map in pixels (px), e.g., "150"; defaults to "220".
- map_alt – optional – alt text for location map; see Wikipedia:Alternative text for images.
- map_caption – optional – caption displayed below the location map; defaults to "Shown within {{{map_type}}}", e.g., "Shown within Scotland".
- coordinates – optional – latitude and longitude for placing the marker on the location map. Use {{Coord}}; see the Coord template documentation for details.
- gridref – optional – map grid reference.
- type – optional – the general type of installation ("Castle", "Fortress", "Bunker", "Military base", "Wall", "Defensive line", etc.).
- code – optional – the location or facility code, such as the ILC or ILK code.
- site_area – optional – where relevant (e.g. for compounds), the land area of the installation.
- floor_area – optional – where relevant (e.g. for buildings), the interior floor area of the installation.
- height – optional – where relevant (e.g. for towers), the height of the installation.
- length – optional – where relevant (e.g. for fences and DMZs), the length of the installation.
- ownership – optional – the current owner of the installation, if relevant.
- operator – optional – where different from ownership.
- controlledby – optional – the country or other power controlling the installation. Multiple powers may be indicated together with the corresponding dates.
- open_to_public – optional – whether the installation is currently open to the general public, if relevant; indicated by "yes" or "no".
- condition – optional – the current condition of the installation.
- built – optional – the date when the installation was built, usually given in years. Use {{start date}} if 1583 or later.
- builder – optional – the person or group responsible for building the installation.
- used – optional – the period during which the installation was in active military use, usually given in years.
- materials – optional – the materials used to construct the installation.
- demolished – optional – the date when the installation was demolished, if applicable.
- battles – optional – any notable battles (usually sieges) that took place in or are closely associated with the installation; as above, the choice of which battles qualify as notable is left to the article editors.
- events – optional – any notable non-battle events that took place in or are closely associated with the installation; as above, the choice of which events qualify as notable is left to the article editors.
- current_commander – optional – for installations currently in military use, the current commanding officer.
- past_commanders – optional – any notable individuals that commanded the forces using this installation; the choice of which commanders qualify as notable is left to the editors of a particular article.
- garrison – optional – the military forces garrisoning the installation. Specific units may be indicated if known; general numbers should be given otherwise.
- occupants – optional – any notable occupants of the installation other than its commanders; as above, the choice of which occupants qualify as notable is left to the article editors.
- designations – legal heritage protection status
- module – optional – to embed other templates beneath this one.
- embed – optional – to embed this template into another above it.
Mapframe maps
[edit]- Basic parameters:
- mapframe – Specify yes or no to show or hide the map, overriding the default. Default: no
- The default value of the mapframe parameter is also modified by the internal onByDefault parameter. Default: yes, unless any of the other map parameters are present:
|pushpin_map=,|map_type=,|map=,|image_map=
- The default value of the mapframe parameter is also modified by the internal onByDefault parameter. Default: yes, unless any of the other map parameters are present:
- mapframe-caption – Caption for the map. Default: blank (or if
|mapframe-geomask=is set, "Location in geomask's label") - mapframe-custom – Use a custom map instead of the automatic mapframe. Specify either a
{{maplink}}template, or another template that generates a mapframe map, or an image name. If used, the subsequent mapframe parameters will be ignored. Default: not specified - mapframe-id or id or qid – Id (Q-number) of Wikidata item to use. Default: item for current page
- mapframe-coordinates or mapframe-coord or coordinates or coord – Coordinates to use, instead of any on Wikidata. Use the {{Coord}} template, e.g.
|coord=. Default: coordinates from Wikidata{{Coord|12.34|N|56.78|E}} - mapframe-wikidata – Set to
yesto show shape/line features from the wikidata item, if any, when|coord=is set. Default: not specified
- mapframe – Specify yes or no to show or hide the map, overriding the default. Default: no
- Customise which features are displayed:
- mapframe-shape – Turn off display of shape feature by setting to
none. Use an inverse shape (geomask) instead of a regular shape by setting toinverse. Default: not specified - mapframe-point – Turn off display of point feature by setting to
none. Force point marker to be displayed by setting toon. Default: not specified - mapframe-line – Turn off display of line feature by setting to
none. Default: not specified - mapframe-geomask – Wikidata item to use as a geomask (everything outside the boundary is shaded darker). Can either be a specific Wikidata item (Q-number), or a property that specifies the item to use (e.g.
P17for country (P17),P131for located in the administrative territorial entity (P131)). Default: not specified - mapframe-switcher – set to
autoorgeomasksorzoomsto enable Template:Switcher-style switching between multiple mapframes. Default: not specifiedauto– switch geomasks found in location (P276) and located in the administrative territorial entity (P131) statements on the page's Wikidata item, searching recursively. E.g. an item's city, that city's state, and that state's country.geomasks– switch between the geomasks specified as a comma-separated list of Wikidata items (Q-numbers) in the mapframe-geomask parameterzooms– switch between "zoomed in"/"zoomed midway"/"zoomed out", where "zoomed in" is the default zoom (with a minimum of3), "zoomed out" is1, and "zoomed midway" is the average
- mapframe-shape – Turn off display of shape feature by setting to
- Other optional parameters:
- mapframe-frame-width or mapframe-width – Frame width. Default: 250
- mapframe-frame-height or mapframe-height – Frame height. Default: 200
- mapframe-shape-fill – Color used to fill shape features. Default: #606060
- mapframe-shape-fill-opacity – Opacity level of shape fill, a number between 0 and 1. Default: 0.5
- mapframe-stroke-color or mapframe-stroke-colour – Color of line features, and outlines of shape features. Default: #ff0000
- mapframe-stroke-width – Width of line features, and outlines of shape features; default is "5". Default: 5
- mapframe-marker – Marker symbol to use for coordinates; see mw:Help:Extension:Kartographer/Icons for options. Default: observation-tower
- Can also be set to
blankto override any default marker symbol
- Can also be set to
- mapframe-marker-color or mapframe-marker-colour – Background color for the marker. Default: #5E74F3
- mapframe-geomask-stroke-color or mapframe-geomask-stroke-colour – Color of outline of geomask shape. Default: #555555
- mapframe-geomask-stroke-width – Width of outline of geomask shape. Default: 2
- mapframe-geomask-fill – Color used to fill outside geomask features. Default: #606060
- mapframe-geomask-fill-opacity – Opacity level of fill outside geomask features, a number between 0 and 1. Default: 0.5
- mapframe-zoom – Set the zoom level, from "1" (map of earth) to "18" (maximum zoom in), to be used if the zoom level cannot be determined automatically from object length or area. Default: 10
- mapframe-length_km or mapframe-length_mi or mapframe-area_km2 or mapframe-area_mi2 – Determine zoom level by passing in object's length (in kilometres or miles) or area (in square kilometres or square miles). Default: not specified
- mapframe-frame-coordinates or mapframe-frame-coord – Alternate latitude and longitude coordinates for initial placement of map, using {{coord}}. Default: derived from item coordinates
- mapframe-type – Set the type of the object, with the same usage as {{coord}}. Default: not specified
- mapframe-population – Set the population, useful with type="city", for {{Infobox dim}}. Default: not specified
Microformat
The HTML markup produced by this template includes an hCard microformat, which makes the place-name and location parsable by computers, either acting automatically to catalogue articles across Wikipedia, or via a browser tool operated by a person, to (for example) add the subject to an address book. Within the hCard is a Geo microformat, which additionally makes the coordinates (latitude & longitude) parsable, so that they can be, say, looked up on a map, or downloaded to a GPS unit. For more information about the use of microformats on Wikipedia, please see the microformat project.
Sub-templates
[edit]If the place or venue has "established", "founded", "opened" or similar dates, use {{start date}} for the earliest of those dates unless the date is before 1583 CE.
If it has a URL, use {{URL}}.
Please do not remove instances of these sub-templates.
Classes
[edit]hCard uses HTML classes including:
- adr
- agent
- category
- county-name
- extended-address
- fn
- label
- locality
- nickname
- note
- org
- region
- street-address
- uid
- url
- vcard
Geo is produced by calling {{coord}}, and uses HTML classes:
- geo
- latitude
- longitude
Please do not rename or remove these classes nor collapse nested elements which use them.
Precision
[edit]When giving coordinates, please use an appropriate level of precision. Do not use {{coord}}'s |name= parameter.
Tracking category
TemplateData
TemplateData for Infobox military installation
TemplateData
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
An infobox for a military structure or facility, such as a fortification or military base
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||