Jump to content

Talk:Capacitor plague

Page contents not supported in other languages.
From Wikipedia, the free encyclopedia
This is an old revision of this page, as edited by Andypreston (talk | contribs) at 12:31, 1 November 2019 (Harmless glue?: removed my pointless response). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.
WikiProject iconElectronics
WikiProject iconThis article is part of WikiProject Electronics, an attempt to provide a standard approach to writing articles about electronics on Wikipedia. If you would like to participate, you can choose to edit the article attached to this page, or visit the project page, where you can join the project and see a list of open tasks. Leave messages at the project talk page
???This article has not yet received a rating on the project's importance scale.
WikiProject iconGuild of Copy Editors
WikiProject iconThis article was copy edited by Dhtwiki, a member of the Guild of Copy Editors, on 15 March 2016.

Notes on Failure

Just replacing only the exploded/leaking caps will not solve the problem. The other caps on the board will fail via leaking after the repair. Esp if only the leaking ones by the CPU are fixed, the original ones left by the CPU have a short remaining life if they are not bad already. Dell 270 systems are known for this, bad caps behind the CPU replaced, then, the AGP cap fails on the rebuilt Dell boards. Dell did write off millions to extend warranties and fix systems.

Safety

You really don't want to power up a suspect system with the case cover off. Swollen but not exploded caps are hot to the touch indicating a internal current leak. Think firecracker about to explode or vent. Looking at a system powered on with the case off is not safe. Acidic electrolyte and a can aimed at your eye for example. Just the spray from the top vent opening can 'paint' the case cover with electrolyte.

Merge

The section "Non-solid aluminum electrolytic capacitors" is only ancillarily related to the subject of this article. It's much more appropriate at the electrolytic capacitor article because it discusses electrolytic capacitors in general, not as they relate to this specific issue. -- Mikeblas (talk) 02:14, 28 April 2015 (UTC)[reply]

Against. The behavior of some manufacturers have created an unique criminal case within the history of electronic components. This substantiates an capacitor plague article to be useable as “stand alone” article. For that the explanation of the capacitor construction is important. --Elcap (talk) 11:14, 30 August 2015 (UTC)[reply]
Articles in Wikipedia don't need to be "stand alone" articles, as Wikipedia is not paper. The material here is redundant to (and already divergent to) the electrolytic article. The section in question is completely un-related to the capacitor formulation problem described by this article. -- Mikeblas (talk) 15:34, 3 November 2015 (UTC)[reply]
This proposal is stale, with support other than from the proposer. If anything, a merge to Aluminum electrolytic capacitor might have been more appropriate. For now, I'll switch to using a 'see also' template and someone can propose a new merge if there is interest. Klbrain (talk) 07:42, 6 September 2017 (UTC)[reply]

Harmless glue?

Quote: "A dark brown or black crust up the side of a capacitor is invariably glue, not electrolyte. The glue itself is harmless."

Is this really true? There are many reports of such glue becoming conductive with age and causing considerable damage as a consequence. — Preceding unsigned comment added by 212.159.113.176 (talk) 20:52, 4 March 2018 (UTC)[reply]