Cheonma-2: Difference between revisions

"M2020" redirects here. For the Mars rover mission, see Mars 2020.

Chongma 3A1
Type	Main Battle Tank
Place of origin	DPRK
Service history
In service	2020–present
Used by	Korean People's Army Ground Force
Production history
Designer	Uralvagonzavod
Designed	19 September 2019
Manufacturer	Sungcheon Factory
Unit cost	$ 1.5 Million per unit
Produced	2 February 2020
No. built	At least 117 unit on 2024, Planned 2,200 unit
Variants	Chongma 3A1 ($ 1.5 Millions), Chongma 3A2 ($ 2.2 Millions)
Specifications
Mass	62.5 Tons
Length	10.14 Metres
Width	3.26 Metres
Height	4.11 Metres
Crew	4
Passengers	2
Armor	Composite armour
Main armament	125 mm main gun derived from Russian 2A46
Secondary armament	AGS-30 automatic grenade launcher Coaxial machine gun (7.62 mm) 2 x Bulsae-3 or Bulsae 5 anti-tank missiles
Engine	Diesel 1,500 hp
Transmission	Automatic 12-Speeds Transmission
Suspension	Hydropneumatic suspension
Fuel capacity	2,000 Litres
Operational range	600 Kilometres
Maximum speed	95 Km/h

The Chongma 3A1 (천마-2호, previously classified as M2020 or M2024 by foreign intelligence) is a prototype North Korean main battle tank unveiled during the October 2020 military parade that commemorated the 75th anniversary of the foundation of the Worker's Party.

Background

Main article: Tanks of North Korea § Main battle tanks

North Korea originally relied on Soviet and Chinese made tanks before they started developing their own tanks, starting with the Chonma-ho tank. Newer Pokpung-ho and Songun-915 (a 'Pokpung-ho' with cast turret and modified hull) tanks would be developed and introduced in the early 21st century but were still heavily influenced by old Soviet/Russian and Chinese tank designs; namely by the T-62. At the beginning of the 21st century, North Korea was able to obtain T-72 tanks through various channels and various parts of it, which would be used in the development of their tanks, such as with the Songun-915. In 2016, a tank commander in North Hamgyong Province claimed a K1 88-Tank was at a tank research center in North Korea, but the Republic of Korea Armed Forces denied such a claim.

History

On the October 10, 2020, DPRK held a rare night time military parade to celebrate the 75th anniversary of the Workers' Party of Korea's foundation. During the parade, nine of the new tanks were unveiled, alongside new armored fighting vehicles, rocket artilleries, and ballistic missiles, such as the Hwasong-16 and Pukguksong-4 missiles. The tanks displayed were stated to be prototypes. As of March 2024, 9 are known to exist in the updated M2024 standard, but mass production is believed to be planned at the Kusong tank plan.

Design

General layout and armor

Visually, the Chongma 3A1 appears to be a mix design of the American M1 Abrams and the Russian T-14 Armata or Iranian Zulfiqar tank, although its overall layout is more similar to the latter than the former. The front of the turret's armor is angled similarly to the M1 Abrams. The hull of the tank features armor plates on the sides, with slat armor on the rear sides protecting the engine just like the T-14. The glacis plate of the Chongma 3A1 is slightly different from the T-14 and the driver's position is located at the center front of the hull. The tank is equipped with composite armor that is believed to be on par with ones equipped on third generation main battle tanks and is possibly modular in design. Parts of the turret appear to have armor up to 10 cm thick to defend against top attack munitions. Compared to the Songun-915 tank, the commander sits in the right side of the turret. The change in position may indicate an addition of an autoloader inside the turret, but the 4th crew member makes this unlikely. The tank has seven road wheels, indicating that it is bigger than previous North Korean tanks (which have six wheels). These road wheels are protected by rubber plates or skirts. The tank was also seen with new ERA during a parade on July 27, 2023, with this design being dubbed M2024.

Armament

The tank's main gun is likely derived from the Soviet 2A46 125 mm gun, which are also used on the Chonma-216 and Songun-915 tanks. A coaxial machine gun is located left of the main gun and an AGS-30 grenade launcher is located on the left side of the roof of the turret.^{Note 1} The tank also has two Bulsae-3 anti-tank missiles in a folding launcher on the right side of the turret. The Bulsae-3 missiles are said to be reversed engineered Soviet/Russian 9K111 Fagot or 9M133 Kornet missiles. However, the diameter of the ATGM launchers appears to be 150 mm like the 9M133, rather than 120 mm of the 9K111 and thus have a higher penetration. As the T-72s received by North Korea are of early modifications, they cannot fire missiles through the gun tube and thus the reverse-engineered gun used on their tanks cannot do so either, although gun-launched missiles are constrained by the barrel diameter and have less penetration.

Given that the tank uses one piece ammunition, it is also possible that the gun is a smaller 115mm gun with a longer caliber to compensate for the lower penetration of this caliber. However, detailed information was censored in the footage released by Korean Central Television.

Mobility

The Chongma 3A1 was believed to powered by a 1,500 horsepower engine used on the Leopard 2A4 tanks, but stills of the engine shown during the May 28, 2024 visit to Academy of National Defense Science show visual similarities to the engine of the Leopard 2A7, casting this assumption in doubt. The estimated mass of the tank is 55 tons, or above 60 tons. The tank is noted to be relatively compact in size, which is advantageous for armored fighting vehicles traversing hilly and mountainous terrains, such as the geography of the Korean Peninsula.

Sensors and countermeasures

The roof of the turret features panoramic sights and a meteorological mast on the right side, and smoke grenade launchers at the rear of the turret protected by slat armor. The commander and gunner have separate sights, which are believed to have thermal imaging devices. If true, then it would improve the tank's hunter-killer and night fighting capabilities compared to older North Korean tanks. The tank possesses a muzzle reference system to improve its accuracy when firing on the move. Hard kill active protection systems (APS) are fitted on the lower part of the turret; two in the front corners and two on each side, each containing three tube launchers. This APS layout is similar to the Russian Afghanit featured on the T-14. The sensors used for the possible active protection systems are located in the front corners of the turret. This design is similarly seen on the M1A2C (SEPv3). KCTV has published footage of the APS intercepting an RPG-7 style round at the testing grounds in Kusong at the “Weapons and Equipment Exhibition 2023” in Pyongyang, which Joost Oliemans of Oryx has called "a laudable achievement for North Korean engineers".

Reactions

While the biggest highlight of the 75th anniversary Worker's Party parade was the unveiling of the Hwasong-16 ballistic missile, the appearance of the Chongma 3A1 has also taken observers and defense experts by surprise. The Cheonma-2 is strikingly distinct in that it does away with the older T-62 design in many preceding North Korean tanks in favor of a more modern design. As such, the tank has been compared to the American M1A2 Abrams, the Russian T-14 Armata, and to some extent, the Chinese VT-4. There is speculation that the Chongma 3A1 may have been assisted by Russian or Chinese technological transfers due to its very modern design. The nine tanks displayed at the military parade are believed to be prototypes or proof of concept intended for future development or production in the future. Curiously, the Chongma 3A1 sported a desert tan camouflage scheme during the military parade, which is unusual considering there are no deserts in the Korean Peninsula. The choice of color is speculated to be intended for the tank to be compared to Western, Russian, and/or Chinese tanks or to be appealing as an exportable weapon. The Chongma 3A1 is stated to be a testament to the North Korean defense industries' ingenuity despite being under an arms embargo and international sanctions. The Cheonma-2s (along with other paraded weapons) are also seen as North Korea's efforts to modernize its military.

In an interview with Professor Sung Woo, the head of the Department of Military Drones at Shinhan University and a former policy advisor to the Joint Chiefs of Staff (South Korea), he stated the Chongma 3A1 is a technological leap over existing North Korean tanks. He also stated that the tank's development may have been assisted by Iran by using technologies and designs from the Zulfiqar-3 tank. North Korea and Iran are known to cooperate with regards to their militaries. Professor Sung Woo has implied that the Chongma 3A1 may be classified as somewhere between a third and fourth generation main battle tank based on comparisons to older North Koreans and modern foreign tanks. He concluded that the Chongma 3A1 can become a serious threat to the K1 and the K2 tanks and that the South Korean military should improve networking capabilities and develop active protection systems to counter the Chongma 3A1s.

There are doubts over the design and capabilities of the Chongma 3A1. While it is believed to be a leap over predecessor tanks, the Chongma 3A1 is likely no where near as advanced as the M1 Abrams or the T-14 Armata. It is unknown if sensors, communication, networking, and composite armor technologies seen in advanced third and fourth generation main battle tanks are present in the Chongma 3A1s.

Notes

1.^ This tank adopted several characteristics from the Pokpung-ho tank variant called Chonma-216 that was unveiled in 2017. Chonma-216 featured a 125 mm main gun based on the Russian 2A46, dual AGS-30 grenade launchers on the roof of the turret, and two Bulsae-3 anti-tank missiles on the side.