Portal:Underwater diving
(Redirected from P:SCUBA)
Underwater diving
Ambient pressure in diving is often specified in terms of depth of sea water
Topic definition
Portal scope
The scope of this portal includes the technology supporting diving activities, the physiological and medical aspects of diving, the skills and procedures of diving and the training and registration of divers, underwater activities which are to some degree dependent on diving, economical, commercial, safety, and legal aspects of diving, biographical information on notable divers, inventors and manufacturers of diving related equipment and researchers into aspects of diving.
Introduction to underwater diving
Underwater diving, as a human activity, is the practice of descending below the water's surface to interact with the environment. It is also often referred to as diving, an ambiguous term with several possible meanings, depending on context. Immersion in water and exposure to high ambient pressure have physiological effects that limit the depths and duration possible in ambient pressure diving. Humans are not physiologically and anatomically well-adapted to the environmental conditions of diving, and various equipment has been developed to extend the depth and duration of human dives, and allow different types of work to be done.
In ambient pressure diving, the diver is directly exposed to the pressure of the surrounding water. The ambient pressure diver may dive on breath-hold (freediving) or use breathing apparatus for scuba diving or surface-supplied diving, and the saturation diving technique reduces the risk of decompression sickness (DCS) after long-duration deep dives. Atmospheric diving suits (ADS) may be used to isolate the diver from high ambient pressure. Crewed submersibles can extend depth range to full ocean depth, and remotely controlled or robotic machines can reduce risk to humans.
The environment exposes the diver to a wide range of hazards, and though the risks are largely controlled by appropriate diving skills, training, types of equipment and breathing gases used depending on the mode, depth and purpose of diving, it remains a relatively dangerous activity. Professional diving is usually regulated by occupational health and safety legislation, while recreational diving may be entirely unregulated. Diving activities are restricted to maximum depths of about 40 metres (130 ft) for recreational scuba diving, 530 metres (1,740 ft) for commercial saturation diving, and 610 metres (2,000 ft) wearing atmospheric suits. Diving is also restricted to conditions which are not excessively hazardous, though the level of risk acceptable can vary, and fatal incidents may occur.
Recreational diving (sometimes called sport diving or subaquatics) is a popular leisure activity. Technical diving is a form of recreational diving under more challenging conditions. Professional diving (commercial diving, diving for research purposes, or for financial gain) involves working underwater. Public safety diving is the underwater work done by law enforcement, fire rescue, and underwater search and recovery dive teams. Military diving includes combat diving, clearance diving and ships husbandry. Deep sea diving is underwater diving, usually with surface-supplied equipment, and often refers to the use of standard diving dress with the traditional copper helmet. Hard hat diving is any form of diving with a helmet, including the standard copper helmet, and other forms of free-flow and lightweight demand helmets. The history of breath-hold diving goes back at least to classical times, and there is evidence of prehistoric hunting and gathering of seafoods that may have involved underwater swimming. Technical advances allowing the provision of breathing gas to a diver underwater at ambient pressure are recent, and self-contained breathing systems developed at an accelerated rate following the Second World War. (Full article...)
How to use this portal
- There are several ways to find content on Wikipedia.
If you have a useful search string, a Google Search is quite effective.
Wikipedia search will take you directly to the article if you know the exact name or if Wikipedia has a redirect to the article. It will also suggest other articles in Wikipedia which may be relevant to your search criteria.
The navigation box at the bottom of pages which are relevant to the project provides links to the articles listed. (Not currently available on mobile).
If you want a list of articles in the project that you can browse through, looking for inspiration or a recognisable article title, then there are several other routes:
- Outline of underwater diving is a hierarchical list of all the articles, but may not always be up to date.
- Index of underwater diving is an alphabetical list of the articles and redirects to sections of the articles representing common dive related topics, (also not always up to date). It has sub-indexes for some of the associated groups of articles, such as:
- The Glossary of underwater diving terminology is an alphabetical list of terms commonly used in diving and their meanings in this context. A useful quick reference. A definition will often contain a link to a detailed main article, or a section of an article on the term. If you can't find a term and are reasonably sure it is a diving term in general use in English, leave a note on the talk page.
Category:Underwater diving and the associated subcategories should also list all the articles, probably in a different hierarchical structure to that used for the navbox and outline list. Sometimes the category system can be more appropriate for finding information. It is also helpful for maintenance of Wikipedia and keeping track of the connectedness of articles.
If you have unlimited time and no special target, you can go down the rabbit-hole – Read the topic root article Underwater diving, and click on any link that looks interesting. Read until you find another interesting link and click on that, otherwise click your browser arrow to go back, and carry on. Stop when reality intrudes or you get bored, tired, thirsty or a fire breaks out.
None of these systems is perfect or complete. If you find an error or omission let us know, or fix it if you know how. This is a crowdsourced project – you can be one of the crowd.
Diving modes
-
Recreational scuba diver
Scuba diving is a mode of underwater diving whereby divers use breathing equipment that is completely independent of a surface breathing gas supply, and therefore has a limited but variable endurance. The word scuba is an acronym for "Self-Contained Underwater Breathing Apparatus" and was coined by Christian J. Lambertsen in a patent submitted in 1952. Scuba divers carry their own source of breathing gas, affording them greater independence and movement than surface-supplied divers, and more time underwater than freedivers. Although the use of compressed air is common, other gas blends are also used.
Open-circuit scuba systems discharge the breathing gas into the environment as it is exhaled and consist of one or more diving cylinders containing breathing gas at high pressure which is supplied to the diver at ambient pressure through a diving regulator. They may include additional cylinders for range extension, decompression gas or emergency breathing gas. Closed-circuit or semi-closed circuit rebreather scuba systems allow recycling of exhaled gases. The volume of gas used is reduced compared to that of open-circuit, making longer dives feasible. Rebreathers extend the time spent underwater compared to open-circuit for the same metabolic gas consumption. They produce fewer bubbles and less noise than open-circuit scuba, which makes them attractive to covert military divers to avoid detection, scientific divers to avoid disturbing marine animals, and media divers to avoid bubble interference.
Scuba diving may be done recreationally or professionally in a number of applications, including scientific, military and public safety roles, but most commercial diving uses surface-supplied diving equipment for breathing gas security when this is practicable. Scuba divers engaged in armed forces covert operations may be referred to as frogmen, combat divers or attack swimmers.
A scuba diver primarily moves underwater using fins worn on the feet, but external propulsion can be provided by a diver propulsion vehicle, or a sled towed from the surface. Other equipment needed for scuba diving includes a mask to improve underwater vision, exposure protection by means of a diving suit, ballast weights to overcome excess buoyancy, equipment to control buoyancy, and equipment related to the specific circumstances and purpose of the dive, which may include a snorkel when swimming on the surface, a cutting tool to manage entanglement, lights, a dive computer to monitor decompression status, and signalling devices. Scuba divers are trained in the procedures and skills appropriate to their level of certification by diving instructors affiliated to the diver certification organizations which issue these certifications. These include standard operating procedures for using the equipment and dealing with the general hazards of the underwater environment, and emergency procedures for self-help and assistance of a similarly equipped diver experiencing problems. A minimum level of fitness and health is required by most training organisations, but a higher level of fitness may be appropriate for some applications. (Full article...) -
An atmospheric diving suit (ADS), or single atmosphere diving suit is a small one-person articulated submersible which resembles a suit of armour, with elaborate pressure joints to allow articulation while maintaining an internal pressure of one atmosphere. An ADS can enable diving at depths of up to 2,300 feet (700 m) for many hours by eliminating the majority of significant physiological dangers associated with deep diving. The occupant of an ADS does not need to decompress, and there is no need for special breathing gas mixtures, so there is little danger of decompression sickness or nitrogen narcosis when the ADS is functioning properly. An ADS can permit less skilled swimmers to complete deep dives, albeit at the expense of dexterity.
Atmospheric diving suits in current use include the Newtsuit, Exosuit, Hardsuit and the WASP, all of which are self-contained hard suits that incorporate propulsion units. The Hardsuit is constructed from cast aluminum (forged aluminum in a version constructed for the US Navy for submarine rescue); the upper hull is made from cast aluminum, while the bottom dome is machined aluminum. The WASP is of glass-reinforced plastic (GRP) body tube construction. (Full article...) -
Surface-supplied divers riding a stage to the underwater workplace
Underwater diving, as a human activity, is the practice of descending below the water's surface to interact with the environment. It is also often referred to as diving, an ambiguous term with several possible meanings, depending on context.
Immersion in water and exposure to high ambient pressure have physiological effects that limit the depths and duration possible in ambient pressure diving. Humans are not physiologically and anatomically well-adapted to the environmental conditions of diving, and various equipment has been developed to extend the depth and duration of human dives, and allow different types of work to be done.
In ambient pressure diving, the diver is directly exposed to the pressure of the surrounding water. The ambient pressure diver may dive on breath-hold (freediving) or use breathing apparatus for scuba diving or surface-supplied diving, and the saturation diving technique reduces the risk of decompression sickness (DCS) after long-duration deep dives. Atmospheric diving suits (ADS) may be used to isolate the diver from high ambient pressure. Crewed submersibles can extend depth range to full ocean depth, and remotely controlled or robotic machines can reduce risk to humans.
The environment exposes the diver to a wide range of hazards, and though the risks are largely controlled by appropriate diving skills, training, types of equipment and breathing gases used depending on the mode, depth and purpose of diving, it remains a relatively dangerous activity. Professional diving is usually regulated by occupational health and safety legislation, while recreational diving may be entirely unregulated.
Diving activities are restricted to maximum depths of about 40 metres (130 ft) for recreational scuba diving, 530 metres (1,740 ft) for commercial saturation diving, and 610 metres (2,000 ft) wearing atmospheric suits. Diving is also restricted to conditions which are not excessively hazardous, though the level of risk acceptable can vary, and fatal incidents may occur.
Recreational diving (sometimes called sport diving or subaquatics) is a popular leisure activity. Technical diving is a form of recreational diving under more challenging conditions. Professional diving (commercial diving, diving for research purposes, or for financial gain) involves working underwater. Public safety diving is the underwater work done by law enforcement, fire rescue, and underwater search and recovery dive teams. Military diving includes combat diving, clearance diving and ships husbandry.
Deep sea diving is underwater diving, usually with surface-supplied equipment, and often refers to the use of standard diving dress with the traditional copper helmet. Hard hat diving is any form of diving with a helmet, including the standard copper helmet, and other forms of free-flow and lightweight demand helmets.
The history of breath-hold diving goes back at least to classical times, and there is evidence of prehistoric hunting and gathering of seafoods that may have involved underwater swimming. Technical advances allowing the provision of breathing gas to a diver underwater at ambient pressure are recent, and self-contained breathing systems developed at an accelerated rate following the Second World War. (Full article...) -
A freediver on the ocean floor
Freediving, free-diving, free diving, breath-hold diving, or skin diving, is a mode of underwater diving that relies on breath-holding until resurfacing rather than the use of breathing apparatus such as scuba gear.
Besides the limits of breath-hold, immersion in water and exposure to high ambient pressure also have physiological effects that limit the depths and duration possible in freediving.
Examples of freediving activities are traditional fishing techniques, competitive and non-competitive freediving, competitive and non-competitive spearfishing and freediving photography, synchronised swimming, underwater football, underwater rugby, underwater hockey, underwater target shooting and snorkeling. There are also a range of "competitive apnea" disciplines; in which competitors attempt to attain great depths, times, or distances on a single breath.
Historically, the term free diving was also used to refer to scuba diving, due to the freedom of movement compared with surface supplied diving. (Full article...) -
Surface-supplied divers riding a stage to the underwater workplace
Underwater diving, as a human activity, is the practice of descending below the water's surface to interact with the environment. It is also often referred to as diving, an ambiguous term with several possible meanings, depending on context.
Immersion in water and exposure to high ambient pressure have physiological effects that limit the depths and duration possible in ambient pressure diving. Humans are not physiologically and anatomically well-adapted to the environmental conditions of diving, and various equipment has been developed to extend the depth and duration of human dives, and allow different types of work to be done.
In ambient pressure diving, the diver is directly exposed to the pressure of the surrounding water. The ambient pressure diver may dive on breath-hold (freediving) or use breathing apparatus for scuba diving or surface-supplied diving, and the saturation diving technique reduces the risk of decompression sickness (DCS) after long-duration deep dives. Atmospheric diving suits (ADS) may be used to isolate the diver from high ambient pressure. Crewed submersibles can extend depth range to full ocean depth, and remotely controlled or robotic machines can reduce risk to humans.
The environment exposes the diver to a wide range of hazards, and though the risks are largely controlled by appropriate diving skills, training, types of equipment and breathing gases used depending on the mode, depth and purpose of diving, it remains a relatively dangerous activity. Professional diving is usually regulated by occupational health and safety legislation, while recreational diving may be entirely unregulated.
Diving activities are restricted to maximum depths of about 40 metres (130 ft) for recreational scuba diving, 530 metres (1,740 ft) for commercial saturation diving, and 610 metres (2,000 ft) wearing atmospheric suits. Diving is also restricted to conditions which are not excessively hazardous, though the level of risk acceptable can vary, and fatal incidents may occur.
Recreational diving (sometimes called sport diving or subaquatics) is a popular leisure activity. Technical diving is a form of recreational diving under more challenging conditions. Professional diving (commercial diving, diving for research purposes, or for financial gain) involves working underwater. Public safety diving is the underwater work done by law enforcement, fire rescue, and underwater search and recovery dive teams. Military diving includes combat diving, clearance diving and ships husbandry.
Deep sea diving is underwater diving, usually with surface-supplied equipment, and often refers to the use of standard diving dress with the traditional copper helmet. Hard hat diving is any form of diving with a helmet, including the standard copper helmet, and other forms of free-flow and lightweight demand helmets.
The history of breath-hold diving goes back at least to classical times, and there is evidence of prehistoric hunting and gathering of seafoods that may have involved underwater swimming. Technical advances allowing the provision of breathing gas to a diver underwater at ambient pressure are recent, and self-contained breathing systems developed at an accelerated rate following the Second World War. (Full article...) -
Surface-supplied diver at the Monterey Bay Aquarium, Monterey, California
Surface-supplied diving is a mode of underwater diving using equipment supplied with breathing gas through a diver's umbilical from the surface, either from the shore or from a diving support vessel, sometimes indirectly via a diving bell. This is different from scuba diving, where the diver's breathing equipment is completely self-contained and there is no essential link to the surface. The primary advantages of conventional surface supplied diving are lower risk of drowning and considerably larger breathing gas supply than scuba, allowing longer working periods and safer decompression. Disadvantages are the absolute limitation on diver mobility imposed by the length of the umbilical, encumbrance by the umbilical, and high logistical and equipment costs compared with scuba. The disadvantages restrict use of this mode of diving to applications where the diver operates within a small area, which is common in commercial diving work.
The copper helmeted free-flow standard diving dress is the version which made commercial diving a viable occupation, and although still used in some regions, this heavy equipment has been superseded by lighter free-flow helmets, and to a large extent, lightweight demand helmets, band masks and full-face diving masks. Breathing gases used include air, heliox, nitrox and trimix.
Saturation diving is a mode of surface supplied diving in which the divers live under pressure in a saturation system or underwater habitat and are decompressed only at the end of a tour of duty.
Airline, or hookah diving, and "compressor diving" are lower technology variants also using a breathing air supply from the surface. (Full article...) -
Surface-supplied diver at the Monterey Bay Aquarium, Monterey, California
Surface-supplied diving is a mode of underwater diving using equipment supplied with breathing gas through a diver's umbilical from the surface, either from the shore or from a diving support vessel, sometimes indirectly via a diving bell. This is different from scuba diving, where the diver's breathing equipment is completely self-contained and there is no essential link to the surface. The primary advantages of conventional surface supplied diving are lower risk of drowning and considerably larger breathing gas supply than scuba, allowing longer working periods and safer decompression. Disadvantages are the absolute limitation on diver mobility imposed by the length of the umbilical, encumbrance by the umbilical, and high logistical and equipment costs compared with scuba. The disadvantages restrict use of this mode of diving to applications where the diver operates within a small area, which is common in commercial diving work.
The copper helmeted free-flow standard diving dress is the version which made commercial diving a viable occupation, and although still used in some regions, this heavy equipment has been superseded by lighter free-flow helmets, and to a large extent, lightweight demand helmets, band masks and full-face diving masks. Breathing gases used include air, heliox, nitrox and trimix.
Saturation diving is a mode of surface supplied diving in which the divers live under pressure in a saturation system or underwater habitat and are decompressed only at the end of a tour of duty.
Airline, or hookah diving, and "compressor diving" are lower technology variants also using a breathing air supply from the surface. (Full article...) -
Surface-supplied diver at the Monterey Bay Aquarium, Monterey, California
Surface-supplied diving is a mode of underwater diving using equipment supplied with breathing gas through a diver's umbilical from the surface, either from the shore or from a diving support vessel, sometimes indirectly via a diving bell. This is different from scuba diving, where the diver's breathing equipment is completely self-contained and there is no essential link to the surface. The primary advantages of conventional surface supplied diving are lower risk of drowning and considerably larger breathing gas supply than scuba, allowing longer working periods and safer decompression. Disadvantages are the absolute limitation on diver mobility imposed by the length of the umbilical, encumbrance by the umbilical, and high logistical and equipment costs compared with scuba. The disadvantages restrict use of this mode of diving to applications where the diver operates within a small area, which is common in commercial diving work.
The copper helmeted free-flow standard diving dress is the version which made commercial diving a viable occupation, and although still used in some regions, this heavy equipment has been superseded by lighter free-flow helmets, and to a large extent, lightweight demand helmets, band masks and full-face diving masks. Breathing gases used include air, heliox, nitrox and trimix.
Saturation diving is a mode of surface supplied diving in which the divers live under pressure in a saturation system or underwater habitat and are decompressed only at the end of a tour of duty.
Airline, or hookah diving, and "compressor diving" are lower technology variants also using a breathing air supply from the surface. (Full article...) -
Saturation diver working on the USS Monitor wreck at 70 m (230 ft) depth
Saturation diving is an ambient pressure diving technique which allows a diver to remain at working depth for extended periods during which the body tissues become saturated with metabolically inert gas from the breathing gas mixture. Once saturated, the time required for decompression to surface pressure will not increase with longer exposure. The diver undergoes a single decompression at the end of the exposure of several days to weeks duration. The ratio of productive working time at depth to unproductive decompression time is thereby increased, and the health risk to the diver incurred by decompression is minimised.
When a diver breathes pressurized gas, metabolically inert gases are needed in the mixture to dilute oxygen to non-toxic levels. These gases dissolve into the body's tissues, but if they come out of solution too quickly during decompression, they form bubbles in the tissues which can cause decompression sickness ("the bends"), a harmful and potentially fatal condition. To prevent this, divers must follow a controlled decompression process, allowing these inert gases to be safely eliminated through the lungs. However, once a diver’s tissues reach full saturation for a given gas mixture and pressure, no additional inert gas accumulates, meaning decompression time remains the same regardless of further exposure.
Saturation diving takes advantage of this by having divers remain in that saturated state. When not in the water, the divers live in a sealed environment which maintains their pressurised state; this can be an ambient pressure underwater habitat or a saturation system at the surface, with transfer to and from the pressurised living quarters to the equivalent depth underwater via a closed, pressurised diving bell. This may be maintained for up to several weeks, and divers are decompressed to surface pressure only once, at the end of their tour of duty. By limiting the number of decompressions in this way, and using a conservative decompression schedule the risk of decompression sickness is significantly reduced, and the total time spent decompressing is minimized. Saturation divers typically breathe a helium–oxygen mixture to prevent nitrogen narcosis, and limit work of breathing, but at shallow depths saturation diving has been done on nitrox mixtures. Most of the physiological and medical aspects of diving to the same depths are much the same in saturation and bell-bounce ambient pressure diving, or are less of a problem, but there are medical and psychological effects of living under saturation for extended periods.
Saturation diving is a specialized form of diving; of the 3,300 commercial divers employed in the United States in 2015, 336 were saturation divers. Special training and certification is required, as the activity is inherently hazardous, and a set of standard operating procedures, emergency procedures, and a range of specialised equipment is used to control the risk, that require consistently correct performance by all the members of an extended diving team. The combination of relatively large skilled personnel requirements, complex engineering, and bulky, heavy equipment required to support a saturation diving project make it an expensive diving mode, but it allows direct human intervention at places that would not otherwise be practical, and where it is applied, it is generally more economically viable than other options, if such exist. (Full article...) -
Surface-supplied diver at the Monterey Bay Aquarium, Monterey, California
Surface-supplied diving is a mode of underwater diving using equipment supplied with breathing gas through a diver's umbilical from the surface, either from the shore or from a diving support vessel, sometimes indirectly via a diving bell. This is different from scuba diving, where the diver's breathing equipment is completely self-contained and there is no essential link to the surface. The primary advantages of conventional surface supplied diving are lower risk of drowning and considerably larger breathing gas supply than scuba, allowing longer working periods and safer decompression. Disadvantages are the absolute limitation on diver mobility imposed by the length of the umbilical, encumbrance by the umbilical, and high logistical and equipment costs compared with scuba. The disadvantages restrict use of this mode of diving to applications where the diver operates within a small area, which is common in commercial diving work.
The copper helmeted free-flow standard diving dress is the version which made commercial diving a viable occupation, and although still used in some regions, this heavy equipment has been superseded by lighter free-flow helmets, and to a large extent, lightweight demand helmets, band masks and full-face diving masks. Breathing gases used include air, heliox, nitrox and trimix.
Saturation diving is a mode of surface supplied diving in which the divers live under pressure in a saturation system or underwater habitat and are decompressed only at the end of a tour of duty.
Airline, or hookah diving, and "compressor diving" are lower technology variants also using a breathing air supply from the surface. (Full article...) -
Recreational scuba diver
Scuba diving is a mode of underwater diving whereby divers use breathing equipment that is completely independent of a surface breathing gas supply, and therefore has a limited but variable endurance. The word scuba is an acronym for "Self-Contained Underwater Breathing Apparatus" and was coined by Christian J. Lambertsen in a patent submitted in 1952. Scuba divers carry their own source of breathing gas, affording them greater independence and movement than surface-supplied divers, and more time underwater than freedivers. Although the use of compressed air is common, other gas blends are also used.
Open-circuit scuba systems discharge the breathing gas into the environment as it is exhaled and consist of one or more diving cylinders containing breathing gas at high pressure which is supplied to the diver at ambient pressure through a diving regulator. They may include additional cylinders for range extension, decompression gas or emergency breathing gas. Closed-circuit or semi-closed circuit rebreather scuba systems allow recycling of exhaled gases. The volume of gas used is reduced compared to that of open-circuit, making longer dives feasible. Rebreathers extend the time spent underwater compared to open-circuit for the same metabolic gas consumption. They produce fewer bubbles and less noise than open-circuit scuba, which makes them attractive to covert military divers to avoid detection, scientific divers to avoid disturbing marine animals, and media divers to avoid bubble interference.
Scuba diving may be done recreationally or professionally in a number of applications, including scientific, military and public safety roles, but most commercial diving uses surface-supplied diving equipment for breathing gas security when this is practicable. Scuba divers engaged in armed forces covert operations may be referred to as frogmen, combat divers or attack swimmers.
A scuba diver primarily moves underwater using fins worn on the feet, but external propulsion can be provided by a diver propulsion vehicle, or a sled towed from the surface. Other equipment needed for scuba diving includes a mask to improve underwater vision, exposure protection by means of a diving suit, ballast weights to overcome excess buoyancy, equipment to control buoyancy, and equipment related to the specific circumstances and purpose of the dive, which may include a snorkel when swimming on the surface, a cutting tool to manage entanglement, lights, a dive computer to monitor decompression status, and signalling devices. Scuba divers are trained in the procedures and skills appropriate to their level of certification by diving instructors affiliated to the diver certification organizations which issue these certifications. These include standard operating procedures for using the equipment and dealing with the general hazards of the underwater environment, and emergency procedures for self-help and assistance of a similarly equipped diver experiencing problems. A minimum level of fitness and health is required by most training organisations, but a higher level of fitness may be appropriate for some applications. (Full article...) -
Surface-supplied diver at the Monterey Bay Aquarium, Monterey, California
Surface-supplied diving is a mode of underwater diving using equipment supplied with breathing gas through a diver's umbilical from the surface, either from the shore or from a diving support vessel, sometimes indirectly via a diving bell. This is different from scuba diving, where the diver's breathing equipment is completely self-contained and there is no essential link to the surface. The primary advantages of conventional surface supplied diving are lower risk of drowning and considerably larger breathing gas supply than scuba, allowing longer working periods and safer decompression. Disadvantages are the absolute limitation on diver mobility imposed by the length of the umbilical, encumbrance by the umbilical, and high logistical and equipment costs compared with scuba. The disadvantages restrict use of this mode of diving to applications where the diver operates within a small area, which is common in commercial diving work.
The copper helmeted free-flow standard diving dress is the version which made commercial diving a viable occupation, and although still used in some regions, this heavy equipment has been superseded by lighter free-flow helmets, and to a large extent, lightweight demand helmets, band masks and full-face diving masks. Breathing gases used include air, heliox, nitrox and trimix.
Saturation diving is a mode of surface supplied diving in which the divers live under pressure in a saturation system or underwater habitat and are decompressed only at the end of a tour of duty.
Airline, or hookah diving, and "compressor diving" are lower technology variants also using a breathing air supply from the surface. (Full article...) -
2nd Reconnaissance Battalion combat diver training with the Dräger LAR V rebreather
Rebreather diving is underwater diving using diving rebreathers, a class of underwater breathing apparatus which recirculate the breathing gas exhaled by the diver after replacing the oxygen used and removing the carbon dioxide metabolic product. Rebreather diving is practiced by recreational, military and scientific divers in applications where it has advantages over open circuit scuba, and surface supply of breathing gas is impracticable. The main advantages of rebreather diving are extended gas endurance, low noise levels, and lack of bubbles.
Rebreathers are generally used for scuba applications, but are also occasionally used for bailout systems for surface-supplied diving. Gas reclaim systems used for deep heliox diving use similar technology to rebreathers, as do saturation diving life-support systems, but in these applications the gas recycling equipment is not carried by the diver. Atmospheric diving suits also carry rebreather technology to recycle breathing gas as part of the life-support system, but this article covers the procedures of ambient pressure diving using rebreathers carried by the diver.
Rebreathers are generally more complex to use than open circuit scuba, and have more potential points of failure, so acceptably safe use requires a greater level of skill, attention and situational awareness, which is usually derived from understanding the systems, diligent maintenance and overlearning the practical skills of operation and fault recovery. Fault tolerant design can make a rebreather less likely to fail in a way that immediately endangers the user, and reduces the task loading on the diver which in turn may lower the risk of operator error. (Full article...) -
Surface-supplied diver at the Monterey Bay Aquarium, Monterey, California
Surface-supplied diving is a mode of underwater diving using equipment supplied with breathing gas through a diver's umbilical from the surface, either from the shore or from a diving support vessel, sometimes indirectly via a diving bell. This is different from scuba diving, where the diver's breathing equipment is completely self-contained and there is no essential link to the surface. The primary advantages of conventional surface supplied diving are lower risk of drowning and considerably larger breathing gas supply than scuba, allowing longer working periods and safer decompression. Disadvantages are the absolute limitation on diver mobility imposed by the length of the umbilical, encumbrance by the umbilical, and high logistical and equipment costs compared with scuba. The disadvantages restrict use of this mode of diving to applications where the diver operates within a small area, which is common in commercial diving work.
The copper helmeted free-flow standard diving dress is the version which made commercial diving a viable occupation, and although still used in some regions, this heavy equipment has been superseded by lighter free-flow helmets, and to a large extent, lightweight demand helmets, band masks and full-face diving masks. Breathing gases used include air, heliox, nitrox and trimix.
Saturation diving is a mode of surface supplied diving in which the divers live under pressure in a saturation system or underwater habitat and are decompressed only at the end of a tour of duty.
Airline, or hookah diving, and "compressor diving" are lower technology variants also using a breathing air supply from the surface. (Full article...)
.jpg?lang=en)
Diving and support equipment
-
There are several categories of decompression equipment used to help divers decompress, which is the process required to allow divers to return to the surface safely after spending time underwater at higher ambient pressures.
Decompression obligation for a given dive profile must be calculated and monitored to ensure that the risk of decompression sickness is controlled. Some equipment is specifically for these functions, both during planning before the dive and during the dive. Other equipment is used to mark the underwater position of the diver, as a position reference in low visibility or currents, or to assist the diver's ascent and control the depth.
Decompression may be shortened ("accelerated") by breathing an oxygen-rich "decompression gas" such as a nitrox blend or pure oxygen. The high partial pressure of oxygen in such decompression mixes produces the effect known as the oxygen window. This decompression gas is often carried by scuba divers in side-slung cylinders. Cave divers who can only return by a single route, can leave decompression gas cylinders attached to the guideline ("stage" or "drop cylinders") at the points where they will be used. Surface-supplied divers will have the composition of the breathing gas controlled at the gas panel.
Divers with long decompression obligations may be decompressed inside gas filled hyperbaric chambers in the water or at the surface, and in the extreme case, saturation divers are only decompressed at the end of a project, contract, or tour of duty that may be several weeks long. (Full article...) -
A bailout bottle (BoB) or, more formally, bailout cylinder is a scuba cylinder carried by an underwater diver for use as an emergency supply of breathing gas in the event of a primary gas supply failure. A bailout cylinder may be carried by a scuba diver in addition to the primary scuba set, or by a surface supplied diver using either free-flow or demand systems. The bailout gas is not intended for use during the dive except in an emergency, and would be considered a fully redundant breathing gas supply if used correctly. The term may refer to just the cylinder, or the bailout set or emergency gas supply (EGS), which is the cylinder with the gas delivery system attached. The bailout set or bailout system is the combination of the emergency gas cylinder with the gas delivery system to the diver, which includes a diving regulator with either a demand valve, a bailout block, or a bailout valve (BOV).
In solo diving, a buddy bottle is a bailout cylinder carried as a substitute for an emergency gas supply from a diving buddy. A bailout cylinder for recreational scuba diving is often a small cylinder, known as a pony bottle, with a normal scuba regulator set, or a smaller cylinder with a combined first and second stage integrated with the cylinder valve, known as "Spare air", after a well known example of the type.
Rebreathers also have bailout systems, often including an open-circuit bailout bottle. (Full article...) -
A diving suit is a garment or device designed to protect a diver from the underwater environment. A diving suit may also incorporate a breathing gas supply (such as for a standard diving dress or atmospheric diving suit), but in most cases the term applies only to the environmental protective covering worn by the diver. The breathing gas supply is usually referred to separately. There is no generic term for the combination of suit and breathing apparatus alone. It is generally referred to as diving equipment or dive gear along with any other equipment necessary for the dive.
Diving suits can be divided into two classes: "soft" or ambient pressure diving suits – examples are wetsuits, dry suits, semi-dry suits and dive skins – and "hard" or atmospheric pressure diving suits, armored suits that keep the diver at atmospheric pressure at any depth within the operating range of the suit. Hot water suits are actively heated wetsuits. (Full article...) -
A diving weighting system is ballast weight added to a diver or diving equipment to counteract excess buoyancy. They may be used by divers or on equipment such as diving bells, submersibles or camera housings.
Divers wear diver weighting systems, weight belts or weights to counteract the buoyancy of other diving equipment, such as diving suits and aluminium diving cylinders, and buoyancy of the diver. The scuba diver must be weighted sufficiently to be slightly negatively buoyant at the end of the dive when most of the breathing gas has been used, and needs to maintain neutral buoyancy at safety or obligatory decompression stops. During the dive, buoyancy is controlled by adjusting the volume of air in the buoyancy compensation device (BCD) and, if worn, the dry suit, in order to achieve negative, neutral, or positive buoyancy as needed. The amount of weight required is determined by the maximum overall positive buoyancy of the fully equipped but unweighted diver anticipated during the dive, with an empty buoyancy compensator and normally inflated dry suit. This depends on the diver's mass and body composition, buoyancy of other diving gear worn (especially the diving suit), water salinity, weight of breathing gas consumed, and water temperature. It normally is in the range of 2 kilograms (4.4 lb) to 15 kilograms (33 lb). The weights can be distributed to trim the diver to suit the purpose of the dive.
Surface-supplied divers may be more heavily weighted to facilitate underwater work, and may be unable to achieve neutral buoyancy, and rely on the diving stage, bell, umbilical, lifeline, shotline or jackstay for returning to the surface.
Freedivers may also use weights to counteract buoyancy of a wetsuit. However, they are more likely to weight for neutral buoyancy at a specific depth, and their weighting must take into account not only the compression of the suit with depth, but also the compression of the air in their lungs, and the consequent loss of buoyancy. As they have no decompression obligation, they do not have to be neutrally buoyant near the surface at the end of a dive.
If the weights have a method of quick release, they can provide a useful rescue mechanism: they can be dropped in an emergency to provide an instant increase in buoyancy which should return the diver to the surface. Dropping weights increases the risk of barotrauma and decompression sickness due to the possibility of an uncontrollable ascent to the surface. This risk can only be justified when the emergency is life-threatening or the risk of decompression sickness is small, as is the case in freediving and scuba diving when the dive is well short of the no-decompression limit for the depth. Often divers take great care to ensure the weights are not dropped accidentally, and heavily weighted divers may arrange their weights so subsets of the total weight can be dropped individually, allowing for a somewhat more controlled emergency ascent.
The weights are generally made of lead because of its high density, reasonably low cost, ease of casting into suitable shapes, and resistance to corrosion. The lead can be cast in blocks, cast shapes with slots for straps, or shaped as pellets known as "shot" and carried in bags. There is some concern that lead diving weights may constitute a toxic hazard to users and environment, but little evidence of significant risk. (Full article...) -
A liveaboard dive boat on the Similan Islands, Thailand
A dive boat is a boat that recreational divers or professional scuba divers use to reach a dive site which they could not conveniently reach by swimming from the shore. Dive boats may be propelled by wind or muscle power, but are usually powered by internal combustion engines. Some features, like convenient access from the water, are common to all dive boats, while others depend on the specific application or region where they are used. The vessel may be extensively modified to make it fit for purpose, or may be used without much adaptation if it is already usable.
Dive boats may simply transport divers and their equipment to and from the dive site for a single dive, or may provide longer term support and shelter for day trips or periods of several consecutive days. Deployment of divers may be while moored, at anchor, or under way, (also known as live-boating or live-boat diving). There are a range of specialised procedures for boat diving, which include water entry and exit, avoiding injury by the dive boat, and keeping the dive boat crew aware of the location of the divers in the water.
There are also procedures used by the boat crew, to avoid injuring the divers in the water, keeping track of where they are during a dive, recalling the divers in an emergency, and ensuring that none are left behind. (Full article...) -
A lifting bag is an item of diving equipment consisting of a robust and air-tight bag with straps, which is used to lift heavy objects underwater by means of the bag's buoyancy. The heavy object can either be moved horizontally underwater by the diver or sent unaccompanied to the surface.
Lift bag appropriate capacity should match the task at hand. If the lift bag is grossly oversized a runaway or otherwise out of control ascent may result. Commercially available lifting bags may incorporate dump valves to allow the operator to control the buoyancy during ascent, but this is a hazardous operation with high risk of entanglement in an uncontrolled lift or sinking. If a single bag is insufficient, multiple bags may be used, and should be distributed to suit the load.
There are also lifting bags used on land as short lift jacks for lifting cars or heavy loads or lifting bags which are used in machines as a type of pneumatic actuator which provides load over a large area. These lifting bags of the AS/CR type are for example used in the brake mechanism of rollercoasters. (Full article...) -
Offshore support vessel Toisa Perseus with, in the background, the fifth-generation deepwater drillship Discoverer Enterprise, over the Thunder Horse Oil Field. Both are equipped with DP systems.
Dynamic positioning (DP) is a computer-controlled system to automatically maintain a vessel's position and heading by using its own propellers and thrusters. Position reference sensors, combined with wind sensors, motion sensors and gyrocompasses, provide information to the computer pertaining to the vessel's position and the magnitude and direction of environmental forces affecting its position. Examples of vessel types that employ DP include ships and semi-submersible mobile offshore drilling units (MODU), oceanographic research vessels, cable layer ships and cruise ships.
The computer program contains a mathematical model of the vessel that includes information pertaining to the wind and current drag of the vessel and the location of the thrusters. This knowledge, combined with the sensor information, allows the computer to calculate the required steering angle and thruster output for each thruster. This allows operations at sea where mooring or anchoring is not feasible due to deep water, congestion on the sea bottom (pipelines, templates) or other problems.
Dynamic positioning may either be absolute in that the position is locked to a fixed point over the bottom, or relative to a moving object like another ship or an underwater vehicle. One may also position the ship at a favorable angle towards wind, waves and current, called weathervaning.
Dynamic positioning is used by much of the offshore oil industry, for example in the North Sea, Persian Gulf, Gulf of Mexico, West Africa, and off the coast of Brazil. There are currently more than 1800 DP ships. (Full article...) -
A diving mask (also half mask, dive mask or scuba mask) is an item of diving equipment that allows underwater divers, including scuba divers, free-divers, and snorkelers, to see clearly underwater. Surface supplied divers usually use a full face mask or diving helmet, but in some systems the half mask may be used. When the human eye is in direct contact with water as opposed to air, its normal environment, light entering the eye is refracted by a different angle and the eye is unable to focus the light on the retina. By providing an air space in front of the eyes, the eye is able to focus nearly normally. The shape of the air space in the mask slightly affects the ability to focus. Corrective lenses can be fitted to the inside surface of the viewport or contact lenses may be worn inside the mask to allow normal vision for people with focusing defects.
When the diver descends, the ambient pressure rises, and it becomes necessary to equalise the pressure inside the mask with the external ambient pressure to avoid the barotrauma known as mask squeeze. This is done by allowing sufficient air to flow out through the nose into the mask to relieve the pressure difference, which requires the nose to be included in the airspace of the mask. Equalisation during ascent is automatic as excess air inside the mask easily leaks out past the seal.
A wide range of viewport shapes and internal volumes are available, and each design will generally fit some shapes of face better than others. A good comfortable fit and a reliable seal around the edges of the rubber skirt is important to the correct function of the mask. National and international standards relating to diving masks provide a means of ensuring that they are manufactured to a suitable quality. (Full article...) -
Diving equipment, or underwater diving equipment, is equipment used by underwater divers to make diving activities possible, easier, safer and/or more comfortable. This may be equipment primarily intended for this purpose, or equipment intended for other purposes which is found to be suitable for diving use.
The fundamental item of diving equipment used by divers other than freedivers, is underwater breathing apparatus, such as scuba equipment, and surface-supplied diving equipment, but there are other important items of equipment that make diving safer, more convenient or more efficient. Diving equipment used by recreational scuba divers, also known as scuba gear, is mostly personal equipment carried by the diver, but professional divers, particularly when operating in the surface supplied or saturation mode, use a large amount of support equipment not carried by the diver.
Equipment which is used for underwater work or other activities which is not directly related to the activity of diving, or which has not been designed or modified specifically for underwater use by divers is not considered to be diving equipment. (Full article...) -
Trimix scuba cylinder label
Trimix is a breathing gas consisting of oxygen, helium, and nitrogen. It is used in deep commercial diving, during the deep phase of dives carried out using technical diving techniques, and in advanced recreational diving.
The helium is included as a substitute for some of the nitrogen, to reduce the narcotic effect of the breathing gas at depth and to reduce the work of breathing. With a mixture of three gases it is possible to create mixes suitable for different depths or purposes by adjusting the proportions of each gas. Oxygen content can be optimised for the depth to limit the risk of toxicity, and the inert component balanced between nitrogen (which is cheap but narcotic) and helium (which is not narcotic and reduces work of breathing, but is more expensive and can increase heat loss).
The mixture of helium and oxygen with a 0% nitrogen content is generally known as heliox. This is frequently used as a breathing gas in deep commercial diving operations, where it is often recycled to save the expensive helium component. Analysis of two-component gases is much simpler than three-component gases. (Full article...) -
In cave (and occasionally wreck) diving, line markers are used for orientation as a visual and tactile reference on a permanent guideline. Directional markers (commonly a notched acute isosceles triangle in basic outline), are also known as line arrows or Dorff arrows, and point the way to an exit. Line arrows may mark the location of a "jump" location in a cave when two are placed adjacent to each other. Two adjacent arrows facing away from each other, mark a point in the cave where the diver is equidistant from two exits. Arrow direction can be identified by feel in low visibility.
Non-directional markers ("cookies") are purely personal markers that mark specific spots, or the direction of one's chosen exit at line intersections where there are options. Their shape does not provide a tactile indication of direction as this could cause confusion in low visibility. One important reason to be adequately trained before cave diving is that incorrect marking can confuse and fatally endanger not only oneself, but also other divers. (Full article...) -
Nitrox refers to any gas mixture composed (excepting trace gases) of nitrogen and oxygen. It is usually used for mixtures that contain less than 78% nitrogen by volume. In the usual application, underwater diving, nitrox is normally distinguished from air and handled differently. The most common use of nitrox mixtures containing oxygen in higher proportions than atmospheric air is in scuba diving, where the reduced partial pressure of nitrogen is advantageous in reducing nitrogen uptake in the body's tissues, thereby extending the practicable underwater dive time by reducing the decompression requirement, or reducing the risk of decompression sickness (also known as the bends). The two most common recreational diving nitrox mixes are 32% and 36% oxygen, which have maximum operating depths of about 110 feet (34 meters) and 95 feet (29 meters) respectively.
Nitrox is used to a lesser extent in surface-supplied diving, as these advantages are reduced by the more complex logistical requirements for nitrox compared to the use of simple low-pressure compressors for breathing gas supply. Nitrox can also be used in hyperbaric treatment of decompression illness, usually at pressures where pure oxygen would be hazardous. Nitrox is not a safer gas than compressed air in all respects; although its use can reduce the risk of decompression sickness, it increases the risks of oxygen toxicity and fire.
Though not generally referred to as nitrox, an oxygen-enriched air mixture is routinely provided at normal surface ambient pressure as oxygen therapy to patients with compromised respiration and circulation. (Full article...) -
A breathing gas is a mixture of gaseous chemical elements and compounds used for respiration. Air is the most common and only natural breathing gas, but other mixtures of gases, or pure oxygen, are also used in breathing equipment and enclosed habitats. Oxygen is the essential component for any breathing gas. Breathing gases for hyperbaric use have been developed to improve on the performance of ordinary air by reducing the risk of decompression sickness, reducing the duration of decompression, reducing nitrogen narcosis or reducing work of breathing and allowing safer deep diving. (Full article...) -
A diving regulator or underwater diving regulator is a pressure regulator that controls the pressure of breathing gas for underwater diving. The most commonly recognised application is to reduce pressurized breathing gas to ambient pressure and deliver it to the diver, but there are also other types of gas pressure regulator used for diving applications. The gas may be air or one of a variety of specially blended breathing gases. The gas may be supplied from a scuba cylinder carried by the diver, in which case it is called a scuba regulator, or via a hose from a compressor or high-pressure storage cylinders at the surface in surface-supplied diving. A gas pressure regulator has one or more valves in series which reduce pressure from the source, and use the downstream pressure as feedback to control the delivered pressure, or the upstream pressure as feedback to prevent excessive flow rates, lowering the pressure at each stage.
The terms "regulator" and "demand valve" (DV) are often used interchangeably, but a demand valve is the final stage pressure-reduction regulator that delivers gas only while the diver is inhaling and reduces the gas pressure to approximately ambient. In single-hose demand regulators, the demand valve is either held in the diver's mouth by a mouthpiece or attached to the full-face mask or helmet. In twin-hose regulators the demand valve is included in the body of the regulator which is usually attached directly to the cylinder valve or manifold outlet, with a remote mouthpiece supplied at ambient pressure.
A pressure-reduction regulator is used to control the delivery pressure of the gas supplied to a free-flow helmet or full-face mask, in which the flow is continuous, to maintain the downstream pressure which is limited by the ambient pressure of the exhaust and the flow resistance of the delivery system (mainly the umbilical and exhaust valve) and not much influenced by the breathing of the diver. Diving rebreather systems may also use regulators to control the flow of fresh gas, and demand valves, known as automatic diluent valves, to maintain the volume in the breathing loop during descent. Gas reclaim systems and built-in breathing systems (BIBS) use a different kind of regulator to control the flow of exhaled gas to the return hose and through the topside reclaim system, or to the outside of the hyperbaric chamber, these are of the back-pressure regulator class.
The performance of a regulator is measured by the cracking pressure and added mechanical work of breathing, and the capacity to deliver breathing gas at peak inspiratory flow rate at high ambient pressures without excessive pressure drop, and without excessive dead space. For some cold water diving applications the capacity to deliver high flow rates at low ambient temperatures without jamming due to regulator freezing is important. (Full article...) -
A diving cylinder or diving gas cylinder is a gas cylinder used to store and transport high pressure gas used in diving operations. This may be breathing gas used with a scuba set, in which case the cylinder may also be referred to as a scuba cylinder, scuba tank or diving tank. When used for an emergency gas supply for surface supplied diving or scuba, it may be referred to as a bailout cylinder or bailout bottle. It may also be used for surface-supplied diving or as decompression gas . A diving cylinder may also be used to supply inflation gas for a dry suit or buoyancy compensator. Cylinders provide gas to the diver through the demand valve of a diving regulator or the breathing loop of a diving re-breather.
Diving cylinders are usually manufactured from aluminum or steel alloys, and when used on a scuba set are normally fitted with one of two common types of cylinder valve for filling and connection to the regulator. Other accessories such as manifolds, cylinder bands, protective nets and boots and carrying handles may be provided. Various configurations of harness may be used by the diver to carry a cylinder or cylinders while diving, depending on the application. Cylinders used for scuba typically have an internal volume (known as water capacity) of between 3 and 18 litres (0.11 and 0.64 cu ft) and a maximum working pressure rating from 184 to 300 bars (2,670 to 4,350 psi). Cylinders are also available in smaller sizes, such as 0.5, 1.5 and 2 litres, however these are usually used for purposes such as inflation of surface marker buoys, dry suits and buoyancy compensators rather than breathing. Scuba divers may dive with a single cylinder, a pair of similar cylinders, or a main cylinder and a smaller "pony" cylinder, carried on the diver's back or clipped onto the harness at the side. Paired cylinders may be manifolded together or independent. In technical diving, more than two scuba cylinders may be needed.
When pressurized, the gas is compressed up to several hundred times atmospheric pressure. The selection of an appropriate set of diving cylinders for a diving operation is based on the amount of gas required to safely complete the dive. Diving cylinders are most commonly filled with air, but because the main components of air can cause problems when breathed underwater at higher ambient pressure, divers may choose to breathe from cylinders filled with mixtures of gases other than air. Many jurisdictions have regulations that govern the filling, recording of contents, and labeling for diving cylinders. Periodic testing and inspection of diving cylinders is often obligatory to ensure the safety of operators of filling stations. Pressurized diving cylinders are considered dangerous goods for commercial transportation, and regional and international standards for colouring and labeling may also apply. (Full article...)
Diving procedures
-
Scuba Diver in the mountain lake Lai da Marmorera 1,680 metres (5,510 ft) above sea level)
Altitude diving is underwater diving using scuba or surface supplied diving equipment where the surface is 300 metres (980 ft) or more above sea level (for example, a mountain lake). Altitude is significant in diving because it affects the decompression requirement for a dive, so that the stop depths and decompression times used for dives at altitude are different from those used for the same dive profile at sea level. The U.S. Navy tables recommend that no alteration be made for dives at altitudes lower than 91 metres (299 ft) and for dives between 91 and 300 meters correction is required for dives deeper than 44 metres (144 ft) of sea water. Most recently manufactured decompression computers can automatically compensate for altitude. (Full article...) -
Divers decompressing in the water at the end of a dive
The decompression of a diver is the reduction in ambient pressure experienced during ascent from depth. It is also the process of elimination of dissolved inert gases from the diver's body which accumulate during ascent, largely during pauses in the ascent known as decompression stops, and after surfacing, until the gas concentrations reach equilibrium. Divers breathing gas at ambient pressure need to ascend at a rate determined by their exposure to pressure and the breathing gas in use. A diver who only breathes gas at atmospheric pressure when free-diving or snorkelling will not usually need to decompress. Divers using an atmospheric diving suit do not need to decompress as they are never exposed to high ambient pressure.
When a diver descends in the water, the hydrostatic pressure, and therefore the ambient pressure, rises. Because breathing gas is supplied at ambient pressure, some of this gas dissolves into the diver's blood and is transferred by the blood to other tissues. Inert gas such as nitrogen or helium continues to be taken up until the gas dissolved in the diver is in a state of equilibrium with the breathing gas in the diver's lungs, at which point the diver is saturated for that depth and breathing mixture, or the depth, and therefore the pressure, is changed, or the partial pressures of the gases are changed by modifying the breathing gas mixture. During ascent, the ambient pressure is reduced, and at some stage the inert gases dissolved in any given tissue will be at a higher concentration than the equilibrium state and start to diffuse out again. If the pressure reduction is sufficient, excess gas may form bubbles, which may lead to decompression sickness, a possibly debilitating or life-threatening condition. It is essential that divers manage their decompression to avoid excessive bubble formation and decompression sickness. A mismanaged decompression usually results from reducing the ambient pressure too quickly for the amount of gas in solution to be eliminated safely. These bubbles may block arterial blood supply to tissues or directly cause tissue damage. If the decompression is effective, the asymptomatic venous microbubbles present after most dives are eliminated from the diver's body in the alveolar capillary beds of the lungs. If they are not given enough time, or more bubbles are created than can be eliminated safely, the bubbles grow in size and number causing the symptoms and injuries of decompression sickness. The immediate goal of controlled decompression is to avoid development of symptoms of bubble formation in the tissues of the diver, and the long-term goal is to avoid complications due to sub-clinical decompression injury.
The mechanisms of bubble formation and the damage bubbles cause has been the subject of medical research for a considerable time and several hypotheses have been advanced and tested. Tables and algorithms for predicting the outcome of decompression schedules for specified hyperbaric exposures have been proposed, tested and used, and in many cases, superseded. Although constantly refined and generally considered acceptably reliable, the actual outcome for any individual diver remains slightly unpredictable. Although decompression retains some risk, this is now generally considered acceptable for dives within the well tested range of normal recreational and professional diving. Nevertheless, currently popular decompression procedures advise a 'safety stop' additional to any stops required by the algorithm, usually of about three to five minutes at 3 to 6 metres (10 to 20 ft), particularly 1 on an otherwise continuous no-stop ascent.
Decompression may be continuous or staged. A staged decompression ascent is interrupted by decompression stops at calculated depth intervals, but the entire ascent is actually part of the decompression and the ascent rate is critical to harmless elimination of inert gas. A no-decompression dive, or more accurately, a dive with no-stop decompression, relies on limiting the ascent rate for avoidance of excessive bubble formation in the fastest tissues. The elapsed time at surface pressure immediately after a dive is also an important part of decompression and can be thought of as the last decompression stop of a dive. It can take up to 24 hours for the body to return to its normal atmospheric levels of inert gas saturation after a dive. When time is spent on the surface between dives this is known as the "surface interval" and is considered when calculating decompression requirements for the subsequent dive.
Efficient decompression requires the diver to ascend fast enough to establish as high a decompression gradient, in as many tissues, as safely possible, without provoking the development of symptomatic bubbles. This is facilitated by the highest acceptably safe oxygen partial pressure in the breathing gas, and avoiding gas changes that could cause counterdiffusion bubble formation or growth. The development of schedules that are both safe and efficient has been complicated by the large number of variables and uncertainties, including personal variation in response under varying environmental conditions and workload. (Full article...) -
Beginner diver in St. Croix, United States Virgin Islands
Recreational diving or sport diving is diving for the purpose of leisure and enjoyment, usually when using scuba equipment. The term "recreational diving" may also be used in contradistinction to "technical diving", a more demanding aspect of recreational diving which requires more training and experience to develop the competence to reliably manage more complex equipment in the more hazardous conditions associated with the disciplines. Breath-hold diving for recreation also fits into the broader scope of the term, but this article covers the commonly used meaning of scuba diving for recreational purposes, where the diver is not constrained from making a direct near-vertical ascent to the surface at any point during the dive, and risk is considered low.
The equipment used for recreational diving is mostly open circuit scuba, though semi closed and fully automated electronic closed circuit rebreathers may be included in the scope of recreational diving. Risk is managed by training the diver in a range of standardised procedures and skills appropriate to the equipment the diver chooses to use and the environment in which the diver plans to dive. Further experience and development of skills by practice will improve the diver's ability to dive safely. Specialty training is made available by the recreational diver training industry and diving clubs to increase the range of environments and venues the diver can enjoy at an acceptable level of risk.
Reasons to dive and preferred diving activities may vary during the personal development of a recreational diver, and may depend on their psychological profile and their level of dedication to the activity. Most divers average less than eight dives per year, but some total several thousand dives over a few decades and continue diving into their 60s and 70s, occasionally older. Recreational divers may frequent local dive sites or dive as tourists at more distant venues known for desirable underwater environments. An economically significant diving tourism industry services recreational divers, providing equipment, training and diving experiences, generally by specialist providers known as dive centers, dive schools, live-aboard, day charter and basic dive boats.
Legal constraints on recreational diving vary considerably across jurisdictions. Recreational diving may be industry regulated or regulated by law to some extent. The legal responsibility for recreational diving service providers is usually limited as far as possible by waivers which they require the customer to sign before engaging in any diving activity. The extent of responsibility of recreational buddy divers is unclear, but buddy diving is generally recommended by recreational diver training agencies as safer than solo diving, and some service providers insist that customers dive in buddy pairs. The evidence supporting this policy is inconclusive: it may or may not reduce average risk to the clients by imposing a burden on some to the advantage of others, and may reduce liability risk for the service provider. (Full article...) -
The hand signal "OK"
Diver communications are the methods used by divers to communicate with each other or with surface members of the dive team. In professional diving, diver communication is usually between a single working diver and the diving supervisor at the surface control point. This is considered important both for managing the diving work, and as a safety measure for monitoring the condition of the diver. The traditional method of communication was by line signals, but this has been superseded by voice communication, and line signals are now used in emergencies when voice communications have failed. Surface supplied divers often carry a closed circuit video camera on the helmet which allows the surface team to see what the diver is doing and to be involved in inspection tasks. This can also be used to transmit hand signals to the surface if voice communications fails. Underwater slates may be used to write text messages which can be shown to other divers, and there are some dive computers which allow a limited number of pre-programmed text messages to be sent through-water to other divers or surface personnel with compatible equipment.
Communication between divers and between surface personnel and divers is imperfect at best, and non-existent at worst, as a consequence of the physical characteristics of water. This prevents divers from performing at their full potential. Voice communication is the most generally useful format underwater, as visual forms are more affected by visibility, and written communication and signing are relatively slow and restricted by diving equipment.
Recreational divers do not usually have access to voice communication equipment, and it does not generally work with a standard scuba demand valve mouthpiece, so they use other signals. Hand signals are generally used when visibility allows, and there are a range of commonly used signals, with some variations. These signals are often also used by professional divers to communicate with other divers. There is also a range of other special purpose non-verbal signals, mostly used for safety and emergency communications. (Full article...) -
Recreational scuba diver
Scuba diving is a mode of underwater diving whereby divers use breathing equipment that is completely independent of a surface breathing gas supply, and therefore has a limited but variable endurance. The word scuba is an acronym for "Self-Contained Underwater Breathing Apparatus" and was coined by Christian J. Lambertsen in a patent submitted in 1952. Scuba divers carry their own source of breathing gas, affording them greater independence and movement than surface-supplied divers, and more time underwater than freedivers. Although the use of compressed air is common, other gas blends are also used.
Open-circuit scuba systems discharge the breathing gas into the environment as it is exhaled and consist of one or more diving cylinders containing breathing gas at high pressure which is supplied to the diver at ambient pressure through a diving regulator. They may include additional cylinders for range extension, decompression gas or emergency breathing gas. Closed-circuit or semi-closed circuit rebreather scuba systems allow recycling of exhaled gases. The volume of gas used is reduced compared to that of open-circuit, making longer dives feasible. Rebreathers extend the time spent underwater compared to open-circuit for the same metabolic gas consumption. They produce fewer bubbles and less noise than open-circuit scuba, which makes them attractive to covert military divers to avoid detection, scientific divers to avoid disturbing marine animals, and media divers to avoid bubble interference.
Scuba diving may be done recreationally or professionally in a number of applications, including scientific, military and public safety roles, but most commercial diving uses surface-supplied diving equipment for breathing gas security when this is practicable. Scuba divers engaged in armed forces covert operations may be referred to as frogmen, combat divers or attack swimmers.
A scuba diver primarily moves underwater using fins worn on the feet, but external propulsion can be provided by a diver propulsion vehicle, or a sled towed from the surface. Other equipment needed for scuba diving includes a mask to improve underwater vision, exposure protection by means of a diving suit, ballast weights to overcome excess buoyancy, equipment to control buoyancy, and equipment related to the specific circumstances and purpose of the dive, which may include a snorkel when swimming on the surface, a cutting tool to manage entanglement, lights, a dive computer to monitor decompression status, and signalling devices. Scuba divers are trained in the procedures and skills appropriate to their level of certification by diving instructors affiliated to the diver certification organizations which issue these certifications. These include standard operating procedures for using the equipment and dealing with the general hazards of the underwater environment, and emergency procedures for self-help and assistance of a similarly equipped diver experiencing problems. A minimum level of fitness and health is required by most training organisations, but a higher level of fitness may be appropriate for some applications. (Full article...) -
Diver Trevor Jackson returning from a 178 m (584 ft) wreck dive
Technical diving (also referred to as tec diving or tech diving) is scuba diving that exceeds the agency-specified limits of recreational diving for non-professional purposes. Technical diving may expose the diver to hazards beyond those normally associated with recreational diving, and to a greater risk of serious injury or death. Risk may be reduced by using suitable equipment and procedures, which require appropriate knowledge and skills. The required knowledge and skills are preferably developed through specialised training, adequate practice, and experience. The equipment involves breathing gases other than air or standard nitrox mixtures, and multiple gas sources.
Most technical diving is done within the limits of training and previous experience, but by its nature, technical diving includes diving which pushes the boundaries of recognised safe practice, and new equipment and procedures are developed and honed by technical divers in the field. Where these divers are sufficiently knowledgeable, skilled, prepared and lucky, they survive and eventually their experience is integrated into the body of recognised practice.
The popularisation of the term technical diving has been credited to Michael Menduno, who was editor of the (now defunct) diving magazine aquaCorps Journal, but the concept and term, technical diving, go back at least as far as 1977, and divers have been engaging in what is now commonly referred to as technical diving for decades. (Full article...) -
Buddy breathing is a rescue technique used in scuba diving "out-of-gas" emergencies, when two divers share one demand valve, alternately breathing from it. Techniques have been developed for buddy breathing from both twin-hose and single hose regulators, but to a large extent it has been superseded by safer and more reliable techniques using additional equipment, such as the use of a bailout cylinder or breathing through a secondary demand valve on the rescuer's regulator.
Running out of breathing gas most commonly happens as a result of poor gas management. It can also happen due to unforeseen exertion or breathing equipment failure. Equipment failure resulting in the loss of all gas could be caused by failure of a pressure retaining component such as an O-ring or hose in the regulator or, in cold conditions, a freezing of water in the regulator resulting in a free flow from the demand valve. (Full article...) -
Solo diver surveying a dive site. The bailout cylinder can be seen slung at the diver's left side
Solo diving is the practice of self-sufficient underwater diving without a "dive buddy", particularly with reference to scuba diving, but the term is also applied to freediving. Professionally, solo diving has always been an option which depends on operational requirements and risk assessment. Surface supplied diving and atmospheric suit diving are commonly single diver underwater activities but are accompanied by an on-surface support team dedicated to the safety of the diver, including a stand-by diver, and are not considered solo diving in this sense.
Solo freediving has occurred for millennia as evidenced by artifacts dating back to the ancient people of Mesopotamia when people dived to gather food and to collect pearl oysters. It wasn't until the 1950s, with the development of formalised scuba diving training, that recreational solo diving was deemed to be dangerous, particularly for beginners. In an effort to mitigate associated risks, some scuba certification agencies incorporated the practice of buddy diving into their diver training programmes. The true risk of solo diving relative to buddy diving in the same environmental conditions has never been reliably established, and may have been significantly overstated by some organisations, though it is generally recognised that buddy and team diving, when performed as specified in the manuals, will enhance safety to some extent depending on circumstances.
Some divers, typically those with advanced underwater skills, prefer solo diving over buddy diving and acknowledge responsibility for their own safety. One of the more controversial reasons given being the uncertain competence of arbitrarily allocated dive buddies imposed on divers by service providers protected from liability by waivers. Others simply prefer solitude while communing with nature, or find the burden of continuously monitoring another person reduces their enjoyment of the activity, or engage in activities which are incompatible with effective buddy diving practices, and accept the possibility of slightly increased risk, just as others accept the increased risk associated with deeper dives, planned decompression, or penetration under an overhead.
The recreational solo diver uses enhanced procedures, skills and equipment to mitigate the risks associated with not having another competent diver immediately available to assist if something goes wrong. The skills and procedures may be learned through a variety of effective methods to achieve appropriate competence, including formal training programmes with associated assessment and certification. Recreational solo diving, once discouraged by most training agencies, has been accepted since the late 1990s by some agencies that will train and certify experienced divers skilled in self-sufficiency and the use of redundant backup scuba equipment. In most countries there is no legal impediment to solo recreational diving, with or without certification. (Full article...) -
Surface-supplied diver at the Monterey Bay Aquarium, Monterey, California
Surface-supplied diving is a mode of underwater diving using equipment supplied with breathing gas through a diver's umbilical from the surface, either from the shore or from a diving support vessel, sometimes indirectly via a diving bell. This is different from scuba diving, where the diver's breathing equipment is completely self-contained and there is no essential link to the surface. The primary advantages of conventional surface supplied diving are lower risk of drowning and considerably larger breathing gas supply than scuba, allowing longer working periods and safer decompression. Disadvantages are the absolute limitation on diver mobility imposed by the length of the umbilical, encumbrance by the umbilical, and high logistical and equipment costs compared with scuba. The disadvantages restrict use of this mode of diving to applications where the diver operates within a small area, which is common in commercial diving work.
The copper helmeted free-flow standard diving dress is the version which made commercial diving a viable occupation, and although still used in some regions, this heavy equipment has been superseded by lighter free-flow helmets, and to a large extent, lightweight demand helmets, band masks and full-face diving masks. Breathing gases used include air, heliox, nitrox and trimix.
Saturation diving is a mode of surface supplied diving in which the divers live under pressure in a saturation system or underwater habitat and are decompressed only at the end of a tour of duty.
Airline, or hookah diving, and "compressor diving" are lower technology variants also using a breathing air supply from the surface. (Full article...) -
A Navy buddy diver team checking their gauges together
Buddy diving is the use of the buddy system by scuba divers and freedivers. It is a set of safety procedures intended to improve the chances of avoiding or surviving accidents in or under water by having divers dive in a group of two or sometimes three. When using the buddy system, members of the group dive together and co-operate with each other, so that they can help or rescue each other in the event of an emergency. This is most effective if both divers are competent in all relevant skills and sufficiently aware of the situation that they can respond in time, which is a matter of both attitude and competence.
In recreational diving, a pair of divers is usually considered best for buddy diving. With threesomes, one diver can easily lose the attention of the other two, and groups of more than three divers are not using the buddy system. The system is likely to be effective in mitigating out-of-air emergencies, non-diving medical emergencies and entrapment in ropes or nets. When used with the buddy check it can help avoid the omission, misuse and failure of diving equipment.
In technical diving activities such as cave diving, threesomes are considered an acceptable practice. This is usually referred to as team diving to distinguish it from buddy diving in pairs.
When professional divers dive as buddy pairs their responsibility to each other is specified as part of standard operating procedures, code of practice or governing legislation. (Full article...) -
Ice diving is a type of penetration diving where the dive takes place under ice. Because diving under ice places the diver in an overhead environment typically with only a single entry/exit point, it requires special procedures and equipment. Ice diving is done for purposes of recreation, scientific research, public safety (usually search and rescue/recovery) and other professional or commercial reasons.
The most obvious hazards of ice diving are getting lost under the ice, hypothermia, and regulator failure due to freezing. Scuba divers are generally tethered for safety. This means that the diver wears a harness to which a line is secured, and the other end of the line is secured above the surface and monitored by an attendant. Surface supplied equipment inherently provides a tether, and reduces the risks of regulator first stage freezing as the first stage can be managed by the surface team, and the breathing gas supply is less limited. For the surface support team, the hazards include freezing temperatures and falling through thin ice. (Full article...) -
A decompression dive may require the use of more than one gas mixture
Scuba gas planning is the aspect of dive planning and of gas management which deals with the calculation or estimation of the amounts and mixtures of gases to be used for a planned dive. It may assume that the dive profile, including decompression, is known, but the process may be iterative, involving changes to the dive profile as a consequence of the gas requirement calculation, or changes to the gas mixtures chosen. Use of calculated reserves based on planned dive profile and estimated gas consumption rates rather than an arbitrary pressure is sometimes referred to as rock bottom gas management. The purpose of gas planning is to ensure that for all reasonably foreseeable contingencies, the divers of a team have sufficient breathing gas to safely return to a place where more breathing gas is available. In almost all cases this will be the surface.
Gas planning includes the following aspects:- Choice of breathing gases
- Choice of scuba configuration
- Estimation of gas required for the planned dive, including bottom gas, travel gas, and decompression gases, as appropriate to the profile.
- Estimation of gas quantities for reasonably foreseeable contingencies. Under stress it is likely that a diver will increase breathing rate and decrease swimming speed. Both of these lead to a higher gas consumption during an emergency exit or ascent.
- Choice of cylinders to carry the required gases. Each cylinder volume and working pressure must be sufficient to contain the required quantity of gas.
- Calculation of the pressures for each of the gases in each of the cylinders to provide the required quantities.
- Specifying the critical pressures of relevant gas mixtures for appropriate stages (waypoints) of the planned dive profile (gas matching).
Gas planning is one of the stages of scuba gas management. The other stages include:- Knowledge of personal and team members' gas consumption rates under varying conditions
- basic consumption at the surface for variations in workload
- variation in consumption due to depth variation
- variation in consumption due to dive conditions and personal physical and mental condition
- Monitoring the contents of the cylinders during a dive
- Awareness of the critical pressures and using them to manage the dive
- Efficient use of the available gas during the planned dive and during an emergency
- Limiting the risk of equipment malfunctions that could cause a loss of breathing gas
The term "rock bottom gas planning" is used for the method of gas planning based on a planned dive profile where a reasonably accurate estimate of the depths, times, and level of activity is available, so the calculations for gas mixtures and the appropriate quantities of each mixture are known well enough to make fairly rigorous calculations useful. Simpler, easier, and fairly arbitrary rules of thumb are commonly used for dives which do not require long decompression stops. These methods are often adequate for low risk dives, but relying on them for more complex dive plans can put divers at significantly greater risk if they are unaware of the limitations of each method and apply them inappropriately. (Full article...) -
A freediver on the ocean floor
Freediving, free-diving, free diving, breath-hold diving, or skin diving, is a mode of underwater diving that relies on breath-holding until resurfacing rather than the use of breathing apparatus such as scuba gear.
Besides the limits of breath-hold, immersion in water and exposure to high ambient pressure also have physiological effects that limit the depths and duration possible in freediving.
Examples of freediving activities are traditional fishing techniques, competitive and non-competitive freediving, competitive and non-competitive spearfishing and freediving photography, synchronised swimming, underwater football, underwater rugby, underwater hockey, underwater target shooting and snorkeling. There are also a range of "competitive apnea" disciplines; in which competitors attempt to attain great depths, times, or distances on a single breath.
Historically, the term free diving was also used to refer to scuba diving, due to the freedom of movement compared with surface supplied diving. (Full article...) -
The instructor monitors a trainee practicing diving skills.
Scuba skills are skills required to dive safely using self-contained underwater breathing apparatus, known as a scuba set. Most of these skills are relevant to both open-circuit scuba and rebreather scuba, and many also apply to surface-supplied diving. Some scuba skills, which are critical to divers' safety, may require more practice than standard recreational training provides to achieve reliable competence.
Some skills are generally accepted by recreational diver certification agencies as basic and necessary in order to dive without direct supervision. Others are more advanced, although some diver certification and accreditation organizations may require these to endorse entry-level competence. Instructors assess divers on these skills during basic and advanced training. Divers are expected to remain competent at their level of certification, either by practice or through refresher courses. Some certification organizations recommend refresher training if a diver has a lapse of more than six to twelve months without a dive.
Skill categories include selection, functional testing, preparation and transport of scuba equipment, dive planning, preparation for a dive, kitting up for the dive, water entry, descent, breathing underwater, monitoring the dive profile (depth, time, and decompression status) and progress of the dive, personal breathing gas management, situational awareness, communicating with the dive team, buoyancy and trim control, mobility in the water, ascent, emergency and rescue procedures, exit from the water, removal of equipment after the dive, cleaning and preparation of equipment for storage and recording the dive, within the scope of the diver's certification. (Full article...) -
Dive profile of an actual dive as recorded by a personal dive computer and displayed on a desktop screen using dive logging software. In this case depth is in metres.
A dive profile is a description of a diver's pressure exposure over time. It may be as simple as just a depth and time pair, as in: "sixty for twenty," (a bottom time of 20 minutes at a depth of 60 feet) or as complex as a second by second graphical representation of depth and time recorded by a personal dive computer. Several common types of dive profile are specifically named, and these may be characteristic of the purpose of the dive. For example, a working dive at a limited location will often follow a constant depth (square) profile, and a recreational dive is likely to follow a multilevel profile, as the divers start deep and work their way up a reef to get the most out of the available breathing gas. The names are usually descriptive of the graphic appearance.
The intended dive profile is useful as a planning tool as an indication of the risks of decompression sickness and oxygen toxicity for the exposure, to calculate a decompression schedule for the dive, and also for estimating the volume of open-circuit breathing gas needed for a planned dive, as these depend in part upon the depth and duration of the dive. A dive profile diagram is conventionally drawn with elapsed time running from left to right and depth increasing down the page.
Many personal dive computers record the instantaneous depth at small time increments during the dive. This data can sometimes be displayed directly on the dive computer or more often downloaded to a personal computer, tablet, or smartphone and displayed in graphic form as a dive profile. (Full article...)
_Rick_West_and_divers_from_Southwest_Regional_Maintenance_Center_conduct_pre-dive_checks;_hand_signal_%22OK%22.jpg?lang=en)
Science of diving
-
The atmospheric pressure is roughly equal to the sum of partial pressures of constituent gases – oxygen, nitrogen, argon, water vapor, carbon dioxide, etc.
In a mixture of gases, each constituent gas has a partial pressure which is the notional pressure of that constituent gas as if it alone occupied the entire volume of the original mixture at the same temperature. The total pressure of an ideal gas mixture is the sum of the partial pressures of the gases in the mixture (Dalton's Law).
In respiratory physiology, the partial pressure of a dissolved gas in liquid (such as oxygen in arterial blood) is also defined as the partial pressure of that gas as it would be undissolved in gas phase yet in equilibrium with the liquid. This concept is also known as blood gas tension. In this sense, the diffusion of a gas liquid is said to be driven by differences in partial pressure (not concentration). In chemistry and thermodynamics, this concept is generalized to non-ideal gases and instead called fugacity. The partial pressure of a gas is a measure of its thermodynamic activity. Gases dissolve, diffuse, and react according to their partial pressures and not according to their concentrations in a gas mixture or as a solute in solution. This general property of gases is also true in chemical reactions of gases in biology. (Full article...) -
Graph showing a tropical ocean thermocline (depth vs. temperature). Note the rapid change between 100 and 1000 meters. The temperature is nearly constant after 1500 meters depth.
A thermocline (also known as the thermal layer or the metalimnion in lakes) is
a distinct layer based on temperature within a large body of fluid (e.g. water, as in an ocean or lake; or air, e.g. an atmosphere) with a high gradient of distinct temperature differences associated with depth. In the ocean, the thermocline divides the upper mixed layer from the calm deep water below.
Depending largely on season, latitude, and turbulent mixing by wind, thermoclines may be a semi-permanent feature of the body of water in which they occur, or they may form temporarily in response to phenomena such as the radiative heating/cooling of surface water during the day/night. Factors that affect the depth and thickness of a thermocline include seasonal weather variations, latitude, and local environmental conditions, such as tides and currents.
.. (Full article...) -
Scuba diver decompressing at a planned stop during ascent from a dive
Decompression theory is the study and modelling of the transfer of the inert gas component of breathing gases from the gas in the lungs to the tissues and back during exposure to variations in ambient pressure. In the case of underwater diving and compressed air work, this mostly involves ambient pressures greater than the local surface pressure, but astronauts, high altitude mountaineers, and travellers in aircraft which are not pressurised to sea level pressure, are generally exposed to ambient pressures less than standard sea level atmospheric pressure. In all cases, the symptoms caused by decompression occur during or within a relatively short period of hours, or occasionally days, after a significant pressure reduction.
The term "decompression" derives from the reduction in ambient pressure experienced by the organism and refers to both the reduction in pressure and the process of allowing dissolved inert gases to be eliminated from the tissues during and after this reduction in pressure. The uptake of gas by the tissues is in the dissolved state, and elimination also requires the gas to be dissolved, however a sufficient reduction in ambient pressure may cause bubble formation in the tissues, which can lead to tissue damage and the symptoms known as decompression sickness, and also delays the elimination of the gas.
Decompression modeling attempts to explain and predict the mechanism of gas elimination and bubble formation within the organism during and after changes in ambient pressure, and provides mathematical models which attempt to predict acceptably low risk and reasonably practicable procedures for decompression in the field. Both deterministic and probabilistic models have been used, and are still in use.
Efficient decompression requires the diver to ascend fast enough to establish as high a decompression gradient, in as many tissues, as safely possible, without provoking the development of symptomatic bubbles. This is facilitated by the highest acceptably safe oxygen partial pressure in the breathing gas, and avoiding gas changes that could cause counterdiffusion bubble formation or growth. The development of schedules that are both safe and efficient has been complicated by the large number of variables and uncertainties, including personal variation in response under varying environmental conditions and workload. (Full article...) -
In physical chemistry, supersaturation occurs with a solution when the concentration of a solute exceeds the concentration specified by the value of solubility at equilibrium. Most commonly the term is applied to a solution of a solid in a liquid, but it can also be applied to liquids and gases dissolved in a liquid. A supersaturated solution is in a metastable state; it may return to equilibrium by separation of the excess of solute from the solution, by dilution of the solution by adding solvent, or by increasing the solubility of the solute in the solvent. (Full article...)
-
Dead space is the volume of air that is inhaled that does not take part in the gas exchange, because it either remains in the conducting airways or reaches alveoli that are not perfused or poorly perfused. It means that not all the air in each breath is available for the exchange of oxygen and carbon dioxide. Mammals breathe in and out of their lungs, wasting that part of the inhalation which remains in the conducting airways where no gas exchange can occur. (Full article...)
-
Signs explaining how to escape from a rip current, posted at Mission Beach, San Diego, California
A rip current (or just rip) is a specific type of water current that can occur near beaches where waves break. A rip is a strong, localized, and narrow current of water that moves directly away from the shore by cutting through the lines of breaking waves, like a river flowing out to sea. The force of the current in a rip is strongest and fastest next to the surface of the water.
Rip currents can be hazardous to people in the water. Swimmers who are caught in a rip current and who do not understand what is happening, or who may not have the necessary water skills, may panic, or they may exhaust themselves by trying to swim directly against the flow of water. Because of these factors, rip currents are the leading cause of rescues by lifeguards at beaches. In the United States they cause an average of 71 deaths by drowning per year as of 2022[update].
A rip current is not the same thing as undertow, although some people use that term incorrectly when they are talking about a rip current. Contrary to popular belief, neither rip nor undertow can pull a person down and hold them under the water. A rip simply carries floating objects, including people, out to just beyond the zone of the breaking waves, at which point the current dissipates and releases everything it is carrying. (Full article...) -
Simplified schematic of only the lunar portion of Earth's tides, showing (exaggerated) high tides at the sublunar point and its antipode for the hypothetical case of an ocean of constant depth without land, and on the assumption that Earth is not rotating; otherwise there is a lag angle. Solar tides not shown.
Tides are the rise and fall of sea levels caused by the combined effects of the gravitational forces exerted by the Moon (and to a much lesser extent, the Sun) and are also caused by the Earth and Moon orbiting one another.
Tide tables can be used for any given locale to find the predicted times and amplitude (or "tidal range").
The predictions are influenced by many factors including the alignment of the Sun and Moon, the phase and amplitude of the tide (pattern of tides in the deep ocean), the amphidromic systems of the oceans, and the shape of the coastline and near-shore bathymetry (see Timing). They are however only predictions, the actual time and height of the tide is affected by wind and atmospheric pressure. Many shorelines experience semi-diurnal tides—two nearly equal high and low tides each day. Other locations have a diurnal tide—one high and low tide each day. A "mixed tide"—two uneven magnitude tides a day—is a third regular category.
Tides vary on timescales ranging from hours to years due to a number of factors, which determine the lunitidal interval. To make accurate records, tide gauges at fixed stations measure water level over time. Gauges ignore variations caused by waves with periods shorter than minutes. These data are compared to the reference (or datum) level usually called mean sea level.
While tides are usually the largest source of short-term sea-level fluctuations, sea levels are also subject to change from thermal expansion, wind, and barometric pressure changes, resulting in storm surges, especially in shallow seas and near coasts.
Tidal phenomena are not limited to the oceans, but can occur in other systems whenever a gravitational field that varies in time and space is present. For example, the shape of the solid part of the Earth is affected slightly by Earth tide, though this is not as easily seen as the water tidal movements. (Full article...) -
Scuba diver decompressing at a planned stop during ascent from a dive
The physiology of decompression is the aspect of physiology which is affected by exposure to large changes in ambient pressure. It involves a complex interaction of gas solubility, partial pressures and concentration gradients, diffusion, bulk transport and bubble mechanics in living tissues. Gas is inhaled at ambient pressure, and some of this gas dissolves into the blood and other fluids. Inert gas continues to be taken up until the gas dissolved in the tissues is in a state of equilibrium with the gas in the lungs (see: "Saturation diving"), or the ambient pressure is reduced until the inert gases dissolved in the tissues are at a higher concentration than the equilibrium state, and start diffusing out again.
The absorption of gases in liquids depends on the solubility of the specific gas in the specific liquid, the concentration of gas (customarily expressed as partial pressure) and temperature. In the study of decompression theory, the behaviour of gases dissolved in the body tissues is investigated and modeled for variations of pressure over time. Once dissolved, distribution of the dissolved gas is by perfusion, where the solvent (blood) is circulated around the diver's body, and by diffusion, where dissolved gas can spread to local regions of lower concentration when there is no bulk flow of the solvent. Given sufficient time at a specific partial pressure in the breathing gas, the concentration in the tissues will stabilise, or saturate, at a rate depending on the local solubility, diffusion rate and perfusion. If the concentration of the inert gas in the breathing gas is reduced below that of any of the tissues, there will be a tendency for gas to return from the tissues to the breathing gas. This is known as outgassing, and occurs during decompression, when the reduction in ambient pressure or a change of breathing gas reduces the partial pressure of the inert gas in the lungs.
The combined concentrations of gases in any given tissue will depend on the history of pressure and gas composition. Under equilibrium conditions, the total concentration of dissolved gases will be less than the ambient pressure, as oxygen is metabolised in the tissues, and the carbon dioxide produced is much more soluble. However, during a reduction in ambient pressure, the rate of pressure reduction may exceed the rate at which gas can be eliminated by diffusion and perfusion, and if the concentration gets too high, it may reach a stage where bubble formation can occur in the supersaturated tissues. When the pressure of gases in a bubble exceed the combined external pressures of ambient pressure and the surface tension from the bubble - liquid interface, the bubbles will grow, and this growth can cause damage to tissues. Symptoms caused by this damage are known as decompression sickness.
The actual rates of diffusion and perfusion, and the solubility of gases in specific tissues are not generally known, and vary considerably. However mathematical models have been proposed which approximate the real situation to a greater or lesser extent, and these decompression models are used to predict whether symptomatic bubble formation is likely to occur for a given pressure exposure profile. Efficient decompression requires the diver to ascend fast enough to establish as high a decompression gradient, in as many tissues, as safely possible, without provoking the development of symptomatic bubbles. This is facilitated by the highest acceptably safe oxygen partial pressure in the breathing gas, and avoiding gas changes that could cause counterdiffusion bubble formation or growth. The development of schedules that are both safe and efficient has been complicated by the large number of variables and uncertainties, including personal variation in response under varying environmental conditions and workload. (Full article...) -
Example of a dissolved solid (left)
In chemistry, solubility is the ability of a substance, the solute, to form a solution with another substance, the solvent. Insolubility is the opposite property, the inability of the solute to form such a solution.
The extent of the solubility of a substance in a specific solvent is generally measured as the concentration of the solute in a saturated solution, one in which no more solute can be dissolved. At this point, the two substances are said to be at the solubility equilibrium. For some solutes and solvents, there may be no such limit, in which case the two substances are said to be "miscible in all proportions" (or just "miscible").
The solute can be a solid, a liquid, or a gas, while the solvent is usually solid or liquid. Both may be pure substances, or may themselves be solutions. Gases are always miscible in all proportions, except in very extreme situations, and a solid or liquid can be "dissolved" in a gas only by passing into the gaseous state first.
The solubility mainly depends on the composition of solute and solvent (including their pH and the presence of other dissolved substances) as well as on temperature and pressure. The dependency can often be explained in terms of interactions between the particles (atoms, molecules, or ions) of the two substances, and of thermodynamic concepts such as enthalpy and entropy.
Under certain conditions, the concentration of the solute can exceed its usual solubility limit. The result is a supersaturated solution, which is metastable and will rapidly exclude the excess solute if a suitable nucleation site appears.
The concept of solubility does not apply when there is an irreversible chemical reaction between the two substances, such as the reaction of calcium hydroxide with hydrochloric acid; even though one might say, informally, that one "dissolved" the other. The solubility is also not the same as the rate of solution, which is how fast a solid solute dissolves in a liquid solvent. This property depends on many other variables, such as the physical form of the two substances and the manner and intensity of mixing.
The concept and measure of solubility are extremely important in many sciences besides chemistry, such as geology, biology, physics, and oceanography, as well as in engineering, medicine, agriculture, and even in non-technical activities like painting, cleaning, cooking, and brewing. Most chemical reactions of scientific, industrial, or practical interest only happen after the reagents have been dissolved in a suitable solvent. Water is by far the most common such solvent.
The term "soluble" is sometimes used for materials that can form colloidal suspensions of very fine solid particles in a liquid. The quantitative solubility of such substances is generally not well-defined, however. (Full article...) -
Work of breathing (WOB) is the energy expended to inhale and exhale a breathing gas. It is usually expressed as work per unit volume, for example, joules/litre, or as a work rate (power), such as joules/min or equivalent units, as it is not particularly useful without a reference to volume or time. It can be calculated in terms of the pulmonary pressure multiplied by the change in pulmonary volume, or in terms of the oxygen consumption attributable to breathing.
In a normal resting state the work of breathing constitutes about 5% of the total body oxygen consumption. It can increase considerably due to illness or constraints on gas flow imposed by breathing apparatus, ambient pressure, or breathing gas composition. (Full article...) -
A laboratory studying ambient pressure at Oregon State University
The ambient pressure on an object is the pressure of the surrounding medium, such as a gas or liquid, in contact with the object. (Full article...) -
Scuba diver with bifocal lenses fitted to a mask
Underwater vision is the ability to see objects underwater, and this is significantly affected by several factors. Underwater, objects are less visible because of lower levels of natural illumination caused by rapid attenuation of light with distance passed through the water. They are also blurred by scattering of light between the object and the viewer, also resulting in lower contrast. These effects vary with wavelength of the light, and color and turbidity of the water. The vertebrate eye is usually either optimised for underwater vision or air vision, as is the case in the human eye. The visual acuity of the air-optimised eye is severely adversely affected by the difference in refractive index between air and water when immersed in direct contact. Provision of an airspace between the cornea and the water can compensate, but has the side effect of scale and distance distortion. The diver learns to compensate for these distortions. Artificial illumination is effective to improve illumination at short range.
Stereoscopic acuity, the ability to judge relative distances of different objects, is considerably reduced underwater, and this is affected by the field of vision. A narrow field of vision caused by a small viewport in a helmet results in greatly reduced stereoacuity, and associated loss of hand-eye coordination. At very short range in clear water distance is underestimated, in accordance with magnification due to refraction through the flat lens of the mask, but at greater distances - greater than arm's reach, the distance tends to be overestimated to a degree influenced by turbidity. Both relative and absolute depth perception are reduced underwater. Loss of contrast results in overestimation, and magnification effects account for underestimation at short range. Divers can to a large extent adapt to these effects over time and with practice.
Light rays bend when they travel from one medium to another; the amount of bending is determined by the refractive indices of the two media. If one medium has a particular curved shape, it functions as a lens. The cornea, humours, and crystalline lens of the eye together form a lens that focuses images on the retina. The eye of most land animals is adapted for viewing in air. Water, however, has approximately the same refractive index as the cornea (both about 1.33), effectively eliminating the cornea's focusing properties. When immersed in water, instead of focusing images on the retina, they are focused behind the retina, resulting in an extremely blurred image from hypermetropia. This is largely avoided by having an air space between the water and the cornea, trapped inside the mask or helmet.
Water attenuates light due to absorption and as light passes through water colour is selectively absorbed by the water. Color absorption is also affected by turbidity of the water and dissolved material. Water preferentially absorbs red light, and to a lesser extent, yellow, green and violet light, so the color that is least absorbed by water is blue light. Particulates and dissolved materials may absorb different frequencies, and this will affect the color at depth, with results such as the typically green color in many coastal waters, and the dark red-brown color of many freshwater rivers and lakes due to dissolved organic matter.
Visibility is a term which generally predicts the ability of some human, animal, or instrument to optically detect an object in the given environment, and may be expressed as a measure of the distance at which an object or light can be discerned. Factors affecting visibility include illumination, length of the light path, particles which cause scattering, dissolved pigments which absorb specific colours, and salinity and temperature gradients which affect refractive index. Visibility can be measured in any arbitrary direction, and for various colour targets, but horizontal visibility of a black target reduces the variables and meets the requirements for a straight-forward and robust parameter for underwater visibility. Instruments are available for field estimates of visibility from the surface, which can inform the dive team on probable complications. (Full article...) -
Upwelling is an oceanographic phenomenon that involves wind-driven motion of dense, cooler, and usually nutrient-rich water from deep water towards the ocean surface. It replaces the warmer and usually nutrient-depleted surface water. The nutrient-rich upwelled water stimulates the growth and reproduction of primary producers such as phytoplankton. The biomass of phytoplankton and the presence of cool water in those regions allow upwelling zones to be identified by cool sea surface temperatures (SST) and high concentrations of chlorophyll a.
The increased availability of nutrients in upwelling regions results in high levels of primary production and thus fishery production. Approximately 25% of the total global marine fish catches come from five upwellings, which occupy only 5% of the total ocean area. Upwellings that are driven by coastal currents or diverging open ocean have the greatest impact on nutrient-enriched waters and global fishery yields. (Full article...) -
Turbidity standards of 5, 50, and 500 NTU
Turbidity is the cloudiness or haziness of a fluid caused by large numbers of individual particles that are generally invisible to the naked eye, similar to smoke in air. The measurement of turbidity is a key test of both water clarity and water quality.
Fluids can contain suspended solid matter consisting of particles of many different sizes. While some suspended material will be large enough and heavy enough to settle rapidly to the bottom of the container if a liquid sample is left to stand (the settable solids), very small particles will settle only very slowly or not at all if the sample is regularly agitated or the particles are colloidal. These small solid particles cause the liquid to appear turbid.
Turbidity (or haze) is also applied to transparent solids such as glass or plastic. In plastic production, haze is defined as the percentage of light that is deflected more than 2.5° from the incoming light direction. (Full article...) -
Cold shock response is a series of neurogenic cardio-respiratory responses caused by sudden immersion in cold water.
In cold water immersions, such as by falling through thin ice, cold shock response is perhaps the most common cause of death. Also, the abrupt contact with very cold water may cause involuntary inhalation, which, if underwater, can result in fatal drowning.
Death which occurs in such scenarios is complex to investigate and there are several possible causes and phenomena that can take part. The cold water can cause heart attack due to severe vasoconstriction, where the heart has to work harder to pump the same volume of blood throughout the arteries. For people with pre-existing cardiovascular disease, the additional workload can result in myocardial infarction and/or acute heart failure, which ultimately may lead to a cardiac arrest. A vagal response to an extreme stimulus as this one, may, in very rare cases, render per se a cardiac arrest. Hypothermia and extreme stress can both precipitate fatal tachyarrhythmias. A more modern view suggests that an autonomic conflict – sympathetic (due to stress) and parasympathetic (due to the diving reflex) coactivation – may be responsible for some cold water immersion deaths. Gasp reflex and uncontrollable tachypnea can severely increase the risk of water inhalation and drowning.
Some people are much better prepared to survive sudden exposure to very cold water due to body and mental characteristics and due to conditioning. In fact, cold water swimming (also known as ice swimming or winter swimming) is a sport and an activity that reportedly can lead to several health benefits when done regularly. (Full article...)
Occupational diving
-
ROKS Lee Jongmoo (SS-066) and USS Columbus (SSN-762) off the coast of Hawaii; a United States Navy P-3 Orion can be seen observing them nearby.
Underwater warfare, also known as undersea warfare or subsurface warfare, is naval warfare involving underwater vehicle or combat operations conducted underwater. It is one of the four operational areas of naval warfare, the others being surface warfare, aerial warfare, and information warfare. Underwater warfare includes:- Actions by submarines actions, and anti-submarine warfare, i.e. warfare between submarines, other submarines and surface ships; combat airplanes and helicopters may also be engaged when launching special dive-bombs and torpedo-missiles against submarines;
- Underwater special operations, considering:
- Military diving sabotage against ships and ports.
- Anti-frogman techniques.
- Reconnaissance tasks.
-
US Navy diver dredging an excavation site during an underwater recovery operation, searching for personnel who went missing during WWII off the coast of Koror
Salvage diving is the diving work associated with the recovery of all or part of ships, their cargoes, aircraft, and other vehicles and structures which have sunk or fallen into water. In the case of ships it may also refer to repair work done to make an abandoned or distressed but still floating vessel more suitable for towing or propulsion under its own power. The recreational/technical activity known as wreck diving is generally not considered salvage work, though some recovery of artifacts may be done by recreational divers.
Most salvage diving is commercial work, or military work, depending on the diving contractor and the purpose for the salvage operation, Similar underwater work may be done by divers as part of forensic investigations into accidents, in which case the procedures may be more closely allied with underwater archaeology than the more basic procedures of advantageous cost/benefit expected in commercial and military operations.
Clearance diving, the removal of obstructions and hazards to navigation, is closely related to salvage diving, but has a different purpose, in that the objects to be removed are not intended to be recovered, just removed or reduced to a condition where they no longer constitute a hazard or obstruction. Many of the techniques and procedures used in clearance diving are also used in salvage work. (Full article...) -
Public safety diving team members bring in a casualty
Underwater search and recovery is the process of locating and recovering underwater objects, often by divers, but also by the use of submersibles, remotely operated vehicles and electronic equipment on surface vessels.
Most underwater search and recovery is done by professional divers as part of commercial marine salvage operations, military operations, emergency services, or law enforcement activities.
Minor aspects of search and recovery are also considered within the scope of recreational diving. (Full article...) -
Scuba diving education levels as used by ISO, PADI, CMAS, SSI and NAUI
Recreational diver training is the process of developing knowledge and understanding of the basic principles, and the skills and procedures for the use of scuba equipment so that the diver is able to dive for recreational purposes with acceptable risk using the type of equipment and in similar conditions to those experienced during training.
Not only is the underwater environment hazardous but the diving equipment itself can be dangerous. There are problems that divers must learn to avoid and manage when they do occur. Divers need repeated practice and a gradual increase in challenge to develop and internalise the skills needed to control the equipment, to respond effective if they encounter difficulties, and to build confidence in their equipment and themselves. Diver practical training starts with simple but essential procedures, and builds on them until complex procedures can be managed effectively. This may be broken up into several short training programmes, with certification issued for each stage, or combined into a few more substantial programmes with certification issued when all the skills have been mastered.
Many diver training organizations exist, throughout the world, offering diver training leading to certification: the issuing of a "diving certification card," also known as a "C-card," or qualification card. This diving certification model originated at Scripps Institution of Oceanography in 1952 after two divers died while using university-owned equipment and the SIO instituted a system where a card was issued after training as evidence of competence. Diving instructors affiliated to a diving certification agency may work independently or through a university, a dive club, a dive school or a dive shop. They will offer courses that should meet, or exceed, the standards of the certification organization that will certify the divers attending the course. The International Organization for Standardization has approved six recreational diving standards that may be implemented worldwide, and some of the standards developed by the (United States) RSTC are consistent with the applicable ISO Standards:
The initial open water training for a person who is medically fit to dive and a reasonably competent swimmer is relatively short. Many dive shops in popular holiday locations offer courses intended to teach a novice to dive in a few days, which can be combined with diving on the vacation. Other instructors and dive schools will provide more thorough training, which generally takes longer. Dive operators, dive shops, and cylinder filling stations may refuse to allow uncertified people to dive with them, hire diving equipment or have their diving cylinders filled. This may be an agency standard, company policy, or specified by legislation. (Full article...) -
A divemaster (DM) is a role that includes organising and leading recreational dives, particularly in a professional capacity, and is a qualification used in many parts of the world in recreational scuba diving for a diver who has supervisory responsibility for a group of divers and as a dive guide. As well as being a generic term, 'Divemaster' is the title of the first professional rating of many training agencies, such as PADI, SSI, SDI, NASE, except NAUI, which rates a NAUI Divemaster under a NAUI Instructor but above a NAUI Assistant Instructor. The divemaster certification is generally equivalent to the requirements of ISO 24801-3 Dive Leader.
The British Sub-Aqua Club (BSAC) recognizes several agencies' divemaster certificates as equivalent to BSAC Dive Leader, but not to BSAC Advanced Diver. The converse may not be true.
The certification is a prerequisite for training as an instructor in recreational diving with the professional agencies except NAUI, where it is an optional step, because of the different position of the NAUI Divemaster in the NAUI hierarchy. (Full article...) -
Drawing to scale, underwater
Underwater archaeology is archaeology practiced underwater. As with all other branches of archaeology, it evolved from its roots in pre-history and in the classical era to include sites from the historical and industrial eras.
Its acceptance has been a relatively late development due to the difficulties of accessing and working underwater sites, and because the application of archaeology to underwater sites initially emerged from the skills and tools developed by shipwreck salvagers. As a result, underwater archaeology initially struggled to establish itself as actual archaeological research. This changed when universities began teaching the subject and a theoretical and practical base for the sub-discipline was firmly established in the late 1980s.
Underwater archaeology now has a number of branches including, maritime archaeology: the scientifically based study of past human life, behaviors and cultures and their activities in, on, around and (lately) under the sea, estuaries and rivers. This is most often effected using the physical remains found in, around or under salt or fresh water or buried beneath water-logged sediment. In recent years, the study of submerged WWII sites and of submerged aircraft in the form of underwater aviation archaeology have also emerged as bona fide activity.
Though often mistaken as such, underwater archaeology is not restricted to the study of shipwrecks. Changes in sea level because of local seismic events such as the earthquakes that devastated Port Royal and Alexandria or more widespread climatic changes on a continental scale mean that some sites of human occupation that were once on dry land are now submerged. At the end of the last ice age, the North Sea was a great plain, and anthropological material, as well as the remains of animals such as mammoths, are sometimes recovered by trawlers. Also, because human societies have always made use of water, sometimes the remains of structures that these societies built underwater still exist (such as the foundations of crannogs, bridges and harbors) when traces on dry land have been lost. As a result, underwater archaeological sites cover a vast range including: submerged indigenous sites and places where people once lived or visited that have been subsequently covered by water due to rising sea levels; wells, cenotes, wrecks (shipwrecks; aircraft); the remains of structures created in water (such as crannogs, bridges or harbors); other port-related structures; refuse or debris sites where people disposed of their waste, garbage and other items, such as ships, aircraft, munitions and machinery, by dumping into the water.
Underwater archaeology is often complementary to archaeological research on terrestrial sites because the two are often linked by many and various elements including geographic, social, political, economic and other considerations. As a result, a study of an archaeological landscape can involve a multidisciplinary approach requiring the inclusion of many specialists from a variety of disciplines including prehistory, historical archaeology, maritime archaeology, and anthropology. There are many examples. One is the wreck of the VOC ship Zuytdorp lost in 1711 on the coast of Western Australia, where there remains considerable speculation that some of the crew survived and, after establishing themselves on shore, intermixed with indigenous tribes from the area. The archaeological signature at this site also now extends into the interaction between indigenous people and the European pastoralists who entered the area in the mid-19th century. (Full article...) -
NYPD divers removing material from the Harlem Meer following a murder in the area few days prior.
Police diving is a branch of professional diving carried out by police services. Police divers are usually professional police officers, and may either be employed full-time as divers or as general water police officers, or be volunteers who usually serve in other units but are called in if their diving services are required.
The duties carried out by police divers include rescue diving for underwater casualties, under the general classification of public safety diving, and forensic diving, which is search and recovery diving for evidence and bodies. (Full article...) -
A U.S. Army Diver surveys the "sail" of a Soviet era submarine during a joint Army/Navy submarine salvage operation in the Providence River, Providence, RI, July 26, 2008.
Army engineer divers are members of national armies who are trained to undertake tasks underwater, including reconnaissance, demolition, and salvage. These divers have similar skills and qualifications as professional divers. Army divers use both surface supplied "Hard hat" and SCUBA to perform their missions. In the United States Army, they are members of the Corps of Engineers. In the British Army, they may be Royal Engineer Divers or Commando Engineer Divers. (Full article...) -
An ama pearl diver in Japan
Pearl hunting, also known as pearl fishing or pearling, is the activity of recovering or attempting to recover pearls from wild molluscs, usually oysters or mussels, in the sea or freshwater. Pearl hunting was prevalent in India and Japan for thousands of years. On the northern and north-western coast of Western Australia pearl diving began in the 1850s, and started in the Torres Strait Islands in the 1860s, where the term also covers diving for nacre or mother of pearl found in what were known as pearl shells.
In most cases the pearl-bearing molluscs live at depths where they are not manually accessible from the surface, and diving or the use of some form of tool is needed to reach them. Historically the molluscs were retrieved by freediving, a technique where the diver descends to the bottom, collects what they can, and surfaces on a single breath. The diving mask improved the ability of the diver to see while underwater. When the surface-supplied diving helmet became available for underwater work, it was also applied to the task of pearl hunting, and the associated activity of collecting pearl shell as a raw material for the manufacture of buttons, inlays and other decorative work. The surface supplied diving helmet greatly extended the time the diver could stay at depth, and introduced the previously unfamiliar hazards of barotrauma of ascent and decompression sickness. (Full article...) -
A US Navy diver at work. The umbilical supplying air from the surface is clearly visible.
Professional diving is underwater diving where the divers are paid for their work. Occupational diving has a similar meaning and applications. The procedures are often regulated by legislation and codes of practice as it is an inherently hazardous occupation and the diver works as a member of a team. Due to the dangerous nature of some professional diving operations, specialized equipment such as an on-site hyperbaric chamber and diver-to-surface communication system is often required by law, and the mode of diving for some applications may be regulated.
There are several branches of professional diving, the best known of which is probably commercial diving and its specialised applications, offshore diving, inshore civil engineering diving, marine salvage diving, hazmat diving, and ships husbandry diving. There are also applications in scientific research, marine archaeology, fishing and aquaculture, public service, law enforcement, military service, media work and diver training.
Any person wishing to become a professional diver normally requires specific training that satisfies any regulatory agencies which have regional or national authority, such as US Occupational Safety and Health Administration, United Kingdom Health and Safety Executive or South African Department of Employment and Labour. International recognition of professional diver qualifications and registration exists between some countries. (Full article...) -
A United States Navy Mass Communication Specialist conducting underwater photography training
Underwater photography is the process of taking photographs while under water. It is usually done while scuba diving, but can also be done while diving on surface supply, snorkeling, swimming, from a submersible or remotely operated underwater vehicle, or from automated cameras lowered from the surface.
Underwater photography can also be categorized as an art form and a method for recording data.
Successful underwater imaging is usually done with specialized equipment and techniques. However, it offers exciting and rare photographic opportunities. Animals such as fish and marine mammals are common subjects, but photographers also pursue shipwrecks, submerged cave systems, underwater "landscapes", invertebrates, seaweeds, geological features, and portraits of fellow divers. (Full article...) -
NAUI Nitrox diver certification card
A Diving certification or C-card is a document (usually a wallet sized plastic card) recognizing that an individual or organization authorized to do so, "certifies" that the bearer has completed a course of training as required by the agency issuing the card. This is assumed to represent a defined level of skill and knowledge in underwater diving. Divers carry a qualification record or certification card which may be required to prove their qualifications when booking a dive trip, hiring scuba equipment, having diving cylinders filled, or in the case of professional divers, seeking employment.
Although recreational certifications are issued by numerous different diver training agencies, the entry-level grade is not always equivalent. Different agencies will have different entry-level requirements as well as different higher-level grades, but all are claimed to allow a diver to develop their skills and knowledge in achievable steps.
In contradistinction, a diver's logbook, or the electronic equivalent, is primarily evidence of range of diving experience. (Full article...) -
Underwater videographer
Underwater videography is the branch of electronic underwater photography concerned with capturing underwater moving images as a recreational diving, scientific, commercial, documentary, or filmmaking activity. Although technological changes since 1909 have improved the ease of operation and quality of images, significant challenges in the form of protecting equipment from water, low light levels, and the usual hazards of diving must be addressed. (Full article...) -
Nesconset fire department scuba rescue team on training exercise
Public safety diving is underwater diving conducted as part of law enforcement and fire/rescue. Public safety divers differ from recreational, scientific and commercial divers who can generally plan the date, time, and location of a dive, and dive only if the conditions are conducive to the task. Public safety divers respond to emergencies 24 hours a day, 7 days a week, and may be required to dive in the middle of the night, during inclement weather, in zero visibility "black water," or in waters polluted by chemicals and biohazards. (Full article...) -
Underwater demolition is the deliberate destruction or neutralization of man-made or natural underwater obstacles, both for military and civilian purposes. (Full article...)
.jpg?lang=en)
.jpg?lang=en)
Recreational diving
-
Sharks swimming outside shark-proof cage with people inside
Shark cage diving is underwater diving or snorkeling where the observer remains inside a protective cage designed to prevent sharks from making contact with the divers. Shark cage diving is used for scientific observation, underwater cinematography, and as a tourist activity.
Sharks may be attracted to the vicinity of the cage by the use of bait in a procedure known as chumming. This procedure has attracted controversy due to claims that it could potentially alter the natural behaviour of sharks in the vicinity of swimmers.
Similar cages are also used as a protective measure for divers working in waters where potentially dangerous shark species are present. In this application, the shark-proof cage may be used as a refuge, or as a diving stage during descent and ascent, particularly during staged decompression where the divers may be vulnerable while constrained to a specific depth in mid-water for several minutes. In other applications, a mobile cage may be carried by the diver while harvesting organisms such as abalone. (Full article...) -
Finswimming is an underwater sport consisting of four techniques involving swimming with the use of fins either on the water's surface using a snorkel with either monofins or bifins or underwater with monofin either by holding one's breath or using open circuit scuba diving equipment. Events exist over distances similar to swimming competitions for both swimming pool and open water venues. Competition at world and continental level is organised by the Confédération Mondiale des Activités Subaquatiques (CMAS, World Underwater Federation). The sport's first world championship was held in 1976. It also has been featured at the World Games as a trend sport since 1981 and was demonstrated at the 2015 European Games in June 2015. (Full article...) -
Recreational diver over a coral reef in the Red Sea
Recreational dive sites are specific places that recreational scuba divers go to enjoy the underwater environment or for training purposes. They include technical diving sites beyond the range generally accepted for recreational diving. In this context all diving done for recreational purposes is included. Professional diving tends to be done where the job is, and with the exception of diver training and leading groups of recreational divers, does not generally occur at specific sites chosen for their easy access, pleasant conditions or interesting features.
Recreational dive sites may be found in a wide range of bodies of water, and may be popular for various reasons, including accessibility, biodiversity, spectacular topography, historical or cultural interest and artifacts (such as shipwrecks), and water clarity. Tropical waters of high biodiversity and colourful sea life are popular recreational diving tourism destinations. South-east Asia, the Caribbean islands, the Red Sea and the Great Barrier Reef of Australia are regions where the clear, warm, waters, reasonably predictable conditions and colourful and diverse sea life have made recreational diving an economically important tourist industry.
Recreational divers may accept a relatively high level of risk to dive at a site perceived to be of special interest. Wreck diving and cave diving have their adherents, and enthusiasts will endure considerable hardship, risk and expense to visit caves and wrecks where few have been before. Some sites are popular almost exclusively for their convenience for training and practice of skills, such as flooded quarries. They are generally found where more interesting and pleasant diving is not locally available, or may only be accessible when weather or water conditions permit.
While divers may choose to get into the water at any arbitrary place that seems like a good idea at the time, a popular recreational dive site will usually be named, and a geographical position identified and recorded, describing the site with enough accuracy to recognise it, and hopefully, find it again. (Full article...) -
Underwater sports is a group of competitive sports using one or a combination of the following underwater diving techniques - breath-hold, snorkelling or scuba, usually including the use of equipment such as diving masks and fins. These sports are conducted in the natural environment at sites such as open water and sheltered or confined water such as lakes and in artificial aquatic environments such as swimming pools. Underwater sports include the following - aquathlon (i.e. underwater wrestling), finswimming, freediving, spearfishing, sport diving, underwater football, underwater hockey, underwater ice hockey, underwater orienteering, underwater photography, underwater rugby, underwater target shooting and underwater video. (Full article...)
-
Spearfisher Monument in Croatia
Spearfishing is fishing using handheld elongated, sharp-pointed tools such as a spear, gig, or harpoon, to impale the fish in the body. It was one of the earliest fishing techniques used by mankind, and has been deployed in artisanal fishing throughout the world for millennia. Early civilizations were familiar with the custom of spearing fish from rivers and streams using sharpened sticks.
Modern spearfishing usually involves the use of underwater swimming gear and slingshot-like elastic spearguns or compressed gas powered pneumatic spearguns, which launch a tethered dart-like projectile to strike the target fish. Specialised techniques and equipment have been developed for various types of aquatic environments and target fish. Spearfishing uses no bait and is highly selective, with no by-catch, but inflicts lethal injury to the fish and thus precludes catch and release.
Spearfishing may be done using free-diving, snorkelling, or scuba diving techniques, but spearfishing while using scuba equipment is illegal in some countries. The use of mechanically powered spearguns is also outlawed in some countries and jurisdictions such as New Zealand. (Full article...) -
Beginner diver in St. Croix, United States Virgin Islands
Recreational diving or sport diving is diving for the purpose of leisure and enjoyment, usually when using scuba equipment. The term "recreational diving" may also be used in contradistinction to "technical diving", a more demanding aspect of recreational diving which requires more training and experience to develop the competence to reliably manage more complex equipment in the more hazardous conditions associated with the disciplines. Breath-hold diving for recreation also fits into the broader scope of the term, but this article covers the commonly used meaning of scuba diving for recreational purposes, where the diver is not constrained from making a direct near-vertical ascent to the surface at any point during the dive, and risk is considered low.
The equipment used for recreational diving is mostly open circuit scuba, though semi closed and fully automated electronic closed circuit rebreathers may be included in the scope of recreational diving. Risk is managed by training the diver in a range of standardised procedures and skills appropriate to the equipment the diver chooses to use and the environment in which the diver plans to dive. Further experience and development of skills by practice will improve the diver's ability to dive safely. Specialty training is made available by the recreational diver training industry and diving clubs to increase the range of environments and venues the diver can enjoy at an acceptable level of risk.
Reasons to dive and preferred diving activities may vary during the personal development of a recreational diver, and may depend on their psychological profile and their level of dedication to the activity. Most divers average less than eight dives per year, but some total several thousand dives over a few decades and continue diving into their 60s and 70s, occasionally older. Recreational divers may frequent local dive sites or dive as tourists at more distant venues known for desirable underwater environments. An economically significant diving tourism industry services recreational divers, providing equipment, training and diving experiences, generally by specialist providers known as dive centers, dive schools, live-aboard, day charter and basic dive boats.
Legal constraints on recreational diving vary considerably across jurisdictions. Recreational diving may be industry regulated or regulated by law to some extent. The legal responsibility for recreational diving service providers is usually limited as far as possible by waivers which they require the customer to sign before engaging in any diving activity. The extent of responsibility of recreational buddy divers is unclear, but buddy diving is generally recommended by recreational diver training agencies as safer than solo diving, and some service providers insist that customers dive in buddy pairs. The evidence supporting this policy is inconclusive: it may or may not reduce average risk to the clients by imposing a burden on some to the advantage of others, and may reduce liability risk for the service provider. (Full article...) -
Below is the list of current British records in finswimming. The records are ratified by the British Finswimming Association.
This list echoes that found on the Monofin website. These records are correct as of 1 April 2018.
In December 2017 British Finswimming Association made a decision to maintain the National records separately for adults and juniors in line with CMAS regulations. (Full article...) -
Aquathlon (also known as underwater wrestling) is an underwater sport, where two competitors wearing masks and fins wrestle underwater in an attempt to remove a ribbon from each other's ankle band in order to win the bout. The "combat" takes place in a 5-metre (16 ft) square ring within a swimming pool, and is made up of three 30-second rounds, with a fourth round played in the event of a tie. The sport originated during the 1980s in the former USSR (now Russia) and was first played at international level in 1993. It was recognised by the Confédération Mondiale des Activités Subaquatiques (CMAS) in 2008. Combat aquathlon practice training engagements not only under water, but also afloat, above the water surface, both with or without diving gear, utilizing dummy weapons (rubber knives, bayonetted rifles, etc.) or barehanded, combined with grappling and choking techniques in order to neutralize or submit the opponent. (Full article...) -
DIR divers
Doing It Right (DIR) is a holistic approach to scuba diving that encompasses several essential elements, including fundamental diving skills, teamwork, physical fitness, and streamlined and minimalistic equipment configurations. DIR proponents maintain that through these elements, safety is improved by standardizing equipment configuration and dive-team procedures for preventing and dealing with emergencies.
DIR evolved out of the efforts of divers involved in the Woodville Karst Plain Project (WKPP) during the 1990s, who were seeking ways of reducing the fatality rate in those cave systems. The DIR philosophy is now used as a basis for teaching scuba diving from entry-level to technical and cave qualifications by several organizations, such as Global Underwater Explorers (GUE), Unified Team Diving (UTD) and InnerSpace Explorers (ISE). (Full article...) -
Sport diving is an underwater sport that uses recreational open circuit scuba diving equipment and consists of a set of individual and team events conducted in a swimming pool that test the competitors' competency in recreational scuba diving techniques. The sport was developed in Spain during the late 1990s and is currently played mainly in Europe. It is known as Plongée Sportive en Piscine in French and as Buceo De Competición in Spanish. (Full article...)
-
Below is the list of current European finswimming records. The records are ratified by the CMAS Confédération Mondiale des Activités Subaquatiques (World Underwater Federation). (Full article...)
-
Underwater orienteering, also known as scuba orienteering is an underwater sport that uses recreational open circuit scuba diving equipment and consists of a set of individual and team events conducted in both sheltered and open water testing the competitors' competency in underwater navigation. The competition is principally concerned with the effectiveness of navigation technique used by competitors to swim an underwater course following a route marked on a map prepared by the competition organisers, a compass and a counter meter to measure the distance covered. The sport was developed in the Soviet Union during the late 1950s and is played mainly in Europe. It is known as Orientation Sub in French and as La Orientación Subacuática in Spanish. Historically, the sport has also been known as Technical Disciplines. (Full article...)
-
Diver Trevor Jackson returning from a 178 m (584 ft) wreck dive
Technical diving (also referred to as tec diving or tech diving) is scuba diving that exceeds the agency-specified limits of recreational diving for non-professional purposes. Technical diving may expose the diver to hazards beyond those normally associated with recreational diving, and to a greater risk of serious injury or death. Risk may be reduced by using suitable equipment and procedures, which require appropriate knowledge and skills. The required knowledge and skills are preferably developed through specialised training, adequate practice, and experience. The equipment involves breathing gases other than air or standard nitrox mixtures, and multiple gas sources.
Most technical diving is done within the limits of training and previous experience, but by its nature, technical diving includes diving which pushes the boundaries of recognised safe practice, and new equipment and procedures are developed and honed by technical divers in the field. Where these divers are sufficiently knowledgeable, skilled, prepared and lucky, they survive and eventually their experience is integrated into the body of recognised practice.
The popularisation of the term technical diving has been credited to Michael Menduno, who was editor of the (now defunct) diving magazine aquaCorps Journal, but the concept and term, technical diving, go back at least as far as 1977, and divers have been engaging in what is now commonly referred to as technical diving for decades. (Full article...) -
Underwater hockey (UWH), also known as Octopush in the United Kingdom, is a globally played limited-contact sport in which two teams compete to manoeuvre a puck across the bottom of a swimming pool into the opposing team's goal by propelling it with a hockey stick (or pusher).
A key challenge of the game is that players are not able to use breathing devices such as scuba gear whilst playing, they must hold their breath. The game originated in Portsmouth, England in 1954 when Alan Blake, a founder of the newly formed Southsea Sub-Aqua Club, invented the game he called Octopush as a means of keeping the club's members interested and active over the cold winter months when open-water diving lost its appeal. Underwater hockey is now played worldwide, with the Confédération Mondiale des Activités Subaquatiques, abbreviated CMAS, as the world governing body. The first Underwater Hockey World Championship was held in Canada in 1980. (Full article...) -
Below is the list of current United States of America Fin Swimming National Records. The records are ratified by the Underwater Society of America and USA Fin Swimming. (Full article...)
Diving hazards, incidents, safety and law
-
City governments typically have a duty of care to repair and maintain sidewalks
In tort law, a duty of care is a legal obligation that is imposed on an individual, requiring adherence to a standard of reasonable care to avoid careless acts that could foreseeably harm others, and lead to claim in negligence. It is the first element that must be established to proceed with an action in negligence. The claimant must be able to show a duty of care imposed by law that the defendant has breached. In turn, breaching a duty may subject an individual to liability. The duty of care may be imposed by operation of law between individuals who have no current direct relationship (familial or contractual or otherwise) but eventually become related in some manner, as defined by common law (meaning case law).
Duty of care may be considered a formalisation of the social contract, the established and implicit responsibilities held by individuals/entities towards others within society. It is not a requirement that a duty of care be defined by law, though it will often develop through the jurisprudence of common law. (Full article...) -
Divers face specific physical and health risks when they go underwater with scuba or other diving equipment, or use high pressure breathing gas. Some of these factors also affect people who work in raised pressure environments out of water, for example in caissons. This article lists hazards that a diver may be exposed to during a dive, and possible consequences of these hazards, with some details of the proximate causes of the listed consequences. A listing is also given of precautions that may be taken to reduce vulnerability, either by reducing the risk or mitigating the consequences. A hazard that is understood and acknowledged may present a lower risk if appropriate precautions are taken, and the consequences may be less severe if mitigation procedures are planned and in place.
A hazard is any agent or situation that poses a level of threat to life, health, property, or environment. Most hazards remain dormant or potential, with only a theoretical risk of harm, and when a hazard becomes active, and produces undesirable consequences, it is called an incident and may culminate in an emergency or accident. Hazard and vulnerability interact with likelihood of occurrence to create risk, which can be the probability of a specific undesirable consequence of a specific hazard, or the combined probability of undesirable consequences of all the hazards of a specific activity. The presence of a combination of several hazards simultaneously is common in diving, and the effect is generally increased risk to the diver, particularly where the occurrence of an incident due to one hazard triggers other hazards with a resulting cascade of incidents. Many diving fatalities are the result of a cascade of incidents overwhelming the diver, who should be able to manage any single reasonably foreseeable incident. The assessed risk of a dive would generally be considered unacceptable if the diver is not expected to cope with any single reasonably foreseeable incident with a significant probability of occurrence during that dive. Precisely where the line is drawn depends on circumstances. Commercial diving operations tend to be less tolerant of risk than recreational, particularly technical divers, who are less constrained by occupational health and safety legislation.
Decompression sickness and arterial gas embolism in recreational diving are associated with certain demographic, environmental, and dive style factors. A statistical study published in 2005 tested potential risk factors: age, gender, body mass index, smoking, asthma, diabetes, cardiovascular disease, previous decompression illness, years since certification, dives in last year, number of diving days, number of dives in a repetitive series, last dive depth, nitrox use, and drysuit use. No significant associations with decompression sickness or arterial gas embolism were found for asthma, diabetes, cardiovascular disease, smoking, or body mass index. Increased depth, previous DCI, days diving, and being male were associated with higher risk for decompression sickness and arterial gas embolism. Nitrox and drysuit use, greater frequency of diving in the past year, increasing age, and years since certification were associated with lower risk, possibly as indicators of more extensive training and experience.
Statistics show diving fatalities comparable to motor vehicle accidents of 16.4 per 100,000 divers and 16 per 100,000 drivers. Divers Alert Network 2014 data shows there are 3.174 million recreational scuba divers in America, of which 2.351 million dive 1 to 7 times per year and 823,000 dive 8 or more times per year. It is reasonable to say that the average would be in the neighbourhood of 5 dives per year. (Full article...) -
A silt out or silt-out is a situation when underwater visibility is rapidly reduced to functional zero by disturbing fine particulate deposits on the bottom or other solid surfaces. This can happen in scuba and surface supplied diving, or in ROV and submersible operations, and is a more serious hazard for scuba diving in penetration situations where the route to the surface may be obscured. (Full article...)
-
Divers face specific physical and health risks when they go underwater with scuba or other diving equipment, or use high pressure breathing gas. Some of these factors also affect people who work in raised pressure environments out of water, for example in caissons. This article lists hazards that a diver may be exposed to during a dive, and possible consequences of these hazards, with some details of the proximate causes of the listed consequences. A listing is also given of precautions that may be taken to reduce vulnerability, either by reducing the risk or mitigating the consequences. A hazard that is understood and acknowledged may present a lower risk if appropriate precautions are taken, and the consequences may be less severe if mitigation procedures are planned and in place.
A hazard is any agent or situation that poses a level of threat to life, health, property, or environment. Most hazards remain dormant or potential, with only a theoretical risk of harm, and when a hazard becomes active, and produces undesirable consequences, it is called an incident and may culminate in an emergency or accident. Hazard and vulnerability interact with likelihood of occurrence to create risk, which can be the probability of a specific undesirable consequence of a specific hazard, or the combined probability of undesirable consequences of all the hazards of a specific activity. The presence of a combination of several hazards simultaneously is common in diving, and the effect is generally increased risk to the diver, particularly where the occurrence of an incident due to one hazard triggers other hazards with a resulting cascade of incidents. Many diving fatalities are the result of a cascade of incidents overwhelming the diver, who should be able to manage any single reasonably foreseeable incident. The assessed risk of a dive would generally be considered unacceptable if the diver is not expected to cope with any single reasonably foreseeable incident with a significant probability of occurrence during that dive. Precisely where the line is drawn depends on circumstances. Commercial diving operations tend to be less tolerant of risk than recreational, particularly technical divers, who are less constrained by occupational health and safety legislation.
Decompression sickness and arterial gas embolism in recreational diving are associated with certain demographic, environmental, and dive style factors. A statistical study published in 2005 tested potential risk factors: age, gender, body mass index, smoking, asthma, diabetes, cardiovascular disease, previous decompression illness, years since certification, dives in last year, number of diving days, number of dives in a repetitive series, last dive depth, nitrox use, and drysuit use. No significant associations with decompression sickness or arterial gas embolism were found for asthma, diabetes, cardiovascular disease, smoking, or body mass index. Increased depth, previous DCI, days diving, and being male were associated with higher risk for decompression sickness and arterial gas embolism. Nitrox and drysuit use, greater frequency of diving in the past year, increasing age, and years since certification were associated with lower risk, possibly as indicators of more extensive training and experience.
Statistics show diving fatalities comparable to motor vehicle accidents of 16.4 per 100,000 divers and 16 per 100,000 drivers. Divers Alert Network 2014 data shows there are 3.174 million recreational scuba divers in America, of which 2.351 million dive 1 to 7 times per year and 823,000 dive 8 or more times per year. It is reasonable to say that the average would be in the neighbourhood of 5 dives per year. (Full article...) -
A dive team listens to a safety brief from their dive supervisor
The diving supervisor is the professional diving team member who is directly responsible for the diving operation's safety and the management of any incidents or accidents that may occur during the operation; the supervisor is required to be available at the control point of the diving operation for the diving operation's duration, and to manage the planned dive and any contingencies that may occur. Details of competence, requirements, qualifications, registration and formal appointment differ depending on jurisdiction and relevant codes of practice. Diving supervisors are used in commercial diving, military diving, public safety diving and scientific diving operations.
The control point is the place where the supervisor can best monitor the status of the diver and progress of the dive. For scuba dives this is commonly on deck of the dive boat where there is a good view of the surface above the operational area, or on the shore at a nearby point where the divers can be seen when surfaced. For surface supplied diving, the view of the water is usually still necessary, and a view of the line tenders handling the umbilicals is also required, unless there is live video feed from the divers and two-way audio communications with the tenders. The control position also includes the gas panel and communications panel, so the supervisor can remain as fully informed as practicable of the status of the divers and their life support systems during the dive. For bell diving and saturation diving the situation is more complex and the control position may well be inside a compartment where the communications, control and monitoring equipment for the bell and life-support systems are set up.
In recreational diving the term is used to refer to persons managing a recreational dive, with certification such as Divemaster,
Dive Control Specialist, Dive Coordinator, etc. (Full article...) -
Example of risk assessment: A NASA model showing areas at high risk from impact for the International Space Station
Risk management is the identification, evaluation, and prioritization of risks, followed by the minimization, monitoring, and control of the impact or probability of those risks occurring. Risks can come from various sources (i.e, threats) including uncertainty in international markets, political instability, dangers of project failures (at any phase in design, development, production, or sustaining of life-cycles), legal liabilities, credit risk, accidents, natural causes and disasters, deliberate attack from an adversary, or events of uncertain or unpredictable root-cause.
There are two types of events viz. Risks and Opportunities. Negative events can be classified as risks while positive events are classified as opportunities. Risk management standards have been developed by various institutions, including the Project Management Institute, the National Institute of Standards and Technology, actuarial societies, and International Organization for Standardization. Methods, definitions and goals vary widely according to whether the risk management method is in the context of project management, security, engineering, industrial processes, financial portfolios, actuarial assessments, or public health and safety. Certain risk management standards have been criticized for having no measurable improvement on risk, whereas the confidence in estimates and decisions seems to increase.
Strategies to manage threats (uncertainties with negative consequences) typically include avoiding the threat, reducing the negative effect or probability of the threat, transferring all or part of the threat to another party, and even retaining some or all of the potential or actual consequences of a particular threat. The opposite of these strategies can be used to respond to opportunities (uncertain future states with benefits).
As a professional role, a risk manager will "oversee the organization's comprehensive insurance and risk management program, assessing and identifying risks that could impede the reputation, safety, security, or financial success of the organization", and then develop plans to minimize and / or mitigate any negative (financial) outcomes. Risk Analysts support the technical side of the organization's risk management approach: once risk data has been compiled and evaluated, analysts share their findings with their managers, who use those insights to decide among possible solutions.
See also Chief Risk Officer, internal audit, and Financial risk management § Corporate finance. (Full article...) -
This list identifies the legislation governing underwater diving activities listed by region. Some legislation affects only professional diving, other may affect only recreational diving, or all diving activities. The list includes primary and delegated legislation, and international standards for the conduct of diving adopted by national states, but does not include legislation or standards relating to manufacture or testing of diving equipment. (Full article...)
-
Investigation of diving accidents includes investigations into the causes of reportable incidents in professional diving and recreational diving accidents, usually when there is a fatality or litigation for gross negligence.
An investigation of some kind usually follows a fatal diving accident, or one in which litigation is expected. There may be several investigations with different agendas. If police are involved, they generally look for evidence of a crime. In the U.S., the United States Coast Guard will usually investigate if there is a death when diving from a vessel in coastal waters. Health and safety administration officials may investigate when the diver was injured or killed at work. When a death occurs during an organised recreational activity, the certification agency's insurers will usually send an investigator to look into possible liability issues. The investigation may occur almost immediately to some considerable time after the event. In most cases the body will have been recovered and resuscitation attempted, and in this process equipment is usually removed and may be damaged or lost, or the evidence compromised by handling. Witnesses may have dispersed, and equipment is often mishandled by the investigating authorities if they are unfamiliar with the equipment and store it improperly, which can destroy evidence and compromise findings.
Recreational diving accidents are usually relatively uncomplicated, but accidents involving an extended range environment or specialised equipment may require expertise beyond the experience of any one investigator. This is a particular issue when rebreather equipment is involved. Investigators who are not familiar with complex equipment may not know enough about the equipment to understand that they do not know enough.
For every incident in which someone is injured of killed, it has been estimated that a relatively large number of "near miss" incidents occur, which the diver manages well enough to avoid harm. Ideally these will be recorded, analysed for cause, reported, and the results made public, so that similar incidents can be avoided in the future. (Full article...) -
Diving safety is the aspect of underwater diving operations and activities concerned with the safety of the participants. The safety of underwater diving depends on four factors: the environment, the equipment, behaviour of the individual diver and performance of the dive team. The underwater environment can impose severe physical and psychological stress on a diver, and is mostly beyond the diver's control. Equipment is used to operate underwater for anything beyond very short periods, and the reliable function of some of the equipment is critical to even short-term survival. Other equipment allows the diver to operate in relative comfort and efficiency, or to remain healthy over the longer term. The performance of the individual diver depends on learned skills, many of which are not intuitive, and the performance of the team depends on competence, communication, attention and common goals.
There is a large range of hazards to which the diver may be exposed. These each have associated consequences and risks, which should be taken into account during dive planning. Where risks are marginally acceptable it may be possible to mitigate the consequences by setting contingency and emergency plans in place, so that damage can be minimised where reasonably practicable. The acceptable level of risk varies depending on legislation, codes of practice, company policy, and personal choice, with recreational divers having a greater freedom of choice.
In professional diving there is a diving team to support the diving operation, and their primary function is to reduce and mitigate risk to the diver. The diving supervisor for the operation is legally responsible for the safety of the diving team. A diving contractor may have a diving superintendent or a diving safety officer tasked with ensuring the organisation has, and uses, a suitable operations manual to guide their practices. In recreational diving, the dive leader may be partly responsible for diver safety to the extent that the dive briefing is reasonably accurate and does not omit any known hazards that divers in the group can reasonably be expected to be unaware of, and not to lead the group into a known area of unacceptable risk. A certified recreational diver is generally responsible for their own safety, and to a lesser, variable, and poorly defined extent, for the safety of their dive buddy. (Full article...) -
Hazard control methods at the top of the graphic are potentially more effective and protective than those at the bottom. Following this hierarchy of controls normally leads to the implementation of inherently safer systems, where the risk of illness or injury has been substantially reduced.
Hierarchy of hazard control is a system used in industry to prioritize possible interventions to minimize or eliminate exposure to hazards. It is a widely accepted system promoted by numerous safety organizations. This concept is taught to managers in industry, to be promoted as standard practice in the workplace. It has also been used to inform public policy, in fields such as road safety. Various illustrations are used to depict this system, most commonly a triangle.
The hazard controls in the hierarchy are, in order of decreasing priority:
The system is not based on evidence of effectiveness; rather, it relies on whether the elimination of hazards is possible. Eliminating hazards allows workers to be free from the need to recognize and protect themselves against these dangers. Substitution is given lower priority than elimination because substitutes may also present hazards. Engineering controls depend on a well-functioning system and human behaviour, while administrative controls and personal protective equipment are inherently reliant on human actions, making them less reliable. (Full article...) -
A code of practice can be a document that complements occupational health and safety laws and regulations to provide detailed practical guidance on how to comply with legal obligations, and should be followed unless another solution with the same or better health and safety standard is in place, or may be a document for the same purpose published by a self-regulating body to be followed by member organisations.
Codes of practice published by governments do not replace the occupational health and safety laws and regulations, and are generally issued in terms of those laws and regulations. They are intended to help understand how to comply with the requirements of regulations. A workplace inspector can refer to a code of practice when issuing an improvement or prohibition notice, and they may be admissible in court proceedings. A court may use a code of practice to establish what is reasonably practicable action to manage a specific risk. Equivalent or better ways of achieving the required work health and safety may be possible, so compliance with codes of practice is not usually mandatory, providing that any alternative systems used provide a standard of health and safety equal to or better than those recommended by the code of practice.
Organisational codes of practice do not have the same authority under law, but serve a similar purpose. Member organisations generally undertake to comply with the codes of practice as a condition of membership and may lose membership if found to be in violation of the code. (Full article...) -
Common redundant power supply
In engineering and systems theory, redundancy is the intentional duplication of critical components or functions of a system with the goal of increasing reliability of the system, usually in the form of a backup or fail-safe, or to improve actual system performance, such as in the case of GNSS receivers, or multi-threaded computer processing.
In many safety-critical systems, such as fly-by-wire and hydraulic systems in aircraft, some parts of the control system may be triplicated, which is formally termed triple modular redundancy (TMR). An error in one component may then be out-voted by the other two. In a triply redundant system, the system has three sub components, all three of which must fail before the system fails. Since each one rarely fails, and the sub components are designed to preclude common failure modes (which can then be modelled as independent failure), the probability of all three failing is calculated to be extraordinarily small; it is often outweighed by other risk factors, such as human error. Electrical surges arising from lightning strikes are an example of a failure mode which is difficult to fully isolate, unless the components are powered from independent power busses and have no direct electrical pathway in their interconnect (communication by some means is required for voting). Redundancy may also be known by the terms "majority voting systems" or "voting logic".
Redundancy sometimes produces less, instead of greater reliability – it creates a more complex system which is prone to various issues, it may lead to human neglect of duty, and may lead to higher production demands which by overstressing the system may make it less safe.
Redundancy is one form of robustness as practiced in computer science.
Geographic redundancy has become important in the data center industry, to safeguard data against natural disasters and political instability (see below). (Full article...) -
A task load indicates the degree of difficulty experienced when performing a task, and task loading describes the accumulation of tasks that are necessary to perform an operation. A light task loading can be managed by the operator with capacity to spare in case of contingencies. Task loads are primarily associated with underwater diving. They are also associated with workloads in other environments, such as aircraft cockpits and command and control stations.
Task loads may be measured and compared. NASA uses six sub-scales in their task load rating procedure. Three of these relate to the demands on the subject and the other three to interactions between subject and task. Ratings contain a large personal component and may vary considerably between subjects, and over time as experience is gained.- Mental Demands: How much mental and perceptual effort is required;
- Physical Demands: How much physical effort is required;
- Temporal Demands: How much time pressure the subject feels;
- Own Performance: Rating of how successfully the task was performed;
- Effort: Rating of how much effort was put into the task; and
- Frustration: Rating of how frustrating or satisfying the task was to perform.
In underwater diving, task loading increases the risk of failure by the diver to undertake some key basic function which would normally be routine for safety underwater. A heavy task loading may overwhelm the diver if something does not go according to plan. This is particularly a problem in scuba diving, where the breathing gas supply is limited and delays may cause decompression obligations. The same workload may be a light task loading to a skilled diver with considerable experience of all the component tasks, and heavy task loading for a diver with little experience of some of the tasks.
Excessive task loading is implicated in many diving accidents, and may be limited by adding tasks one at a time, and adequately developing the requisite skills for each before adding more. (Full article...) -
Lockout Tagout hasp can accommodate up to 6 padlocks, can be used during group LOTO procedure.
Lock out, tag out or lockout–tagout (LOTO) is a safety procedure used to ensure that dangerous equipment is properly shut off and not able to be started up again prior to the completion of maintenance or repair work. It requires that hazardous energy sources be "isolated and rendered inoperative" before work is started on the equipment in question. The isolated power sources are then locked and a tag is placed on the lock identifying the worker and reason the LOTO is placed on it. The worker then holds the key for the lock, ensuring that only that worker can remove the lock and start the equipment. This prevents accidental startup of equipment while it is in a hazardous state or while a worker is in direct contact with it.
Lockout–tagout is used across industries as a safe method of working on hazardous equipment and is mandated by law in some countries. (Full article...) -
A job safety analysis (JSA) is a procedure that helps integrate accepted safety and health principles and practices into a particular task or job operation. The goal of a JSA is to identify potential hazards of a specific role and recommend procedures to control or prevent these hazards.
Other terms often used to describe this procedure are job hazard analysis (JHA), hazardous task analysis (HTA) and job hazard breakdown.
The terms "job" and "task" are commonly used interchangeably to mean a specific work assignment. Examples of work assignments include "operating a grinder," "using a pressurized water extinguisher" or "changing a flat tire." Each of these tasks have different safety hazards that can be highlighted and fixed by using the job safety analysis. (Full article...)
_listen_to_a_safety_brief_from_their_dive_supervisor.jpg?lang=en)
.jpg?lang=en)
Diving medicine, disorders and treatment
-
In-water recompression (IWR) or underwater oxygen treatment is the emergency treatment of decompression sickness (DCS) by returning the diver underwater to help the gas bubbles in the tissues, which are causing the symptoms, to resolve. It is a procedure that exposes the diver to significant risk which should be compared with the risk associated with the available options and balanced against the probable benefits. Some authorities recommend that it is only to be used when the time to travel to the nearest recompression chamber is too long to save the victim's life; others take a more pragmatic approach and accept that in some circumstances IWR is the best available option. The risks may not be justified for case of mild symptoms likely to resolve spontaneously, or for cases where the diver is likely to be unsafe in the water, but in-water recompression may be justified in cases where severe outcomes are likely if not recompressed, if conducted by a competent and suitably equipped team.
Carrying out in-water recompression when there is a nearby recompression chamber or without suitable equipment and training is never a desirable option. The risk of the procedure is due to the diver suffering from DCS being seriously ill and may become paralysed, unconscious, or stop breathing while underwater. Any one of these events is likely to result in the diver drowning or asphyxiating or suffering further injury during a subsequent rescue to the surface. This risk can be reduced by improving airway security by using surface supplied gas and a helmet or full-face mask. Risk of injury during emergency surfacing is minimised by treatment on 100% oxygen, which is also the only gas with a reliable record of positive outcomes. Early recompression on oxygen has a high rate of complete resolution of symptoms, even for shallower and shorter treatment than the highly successful US Navy Treatment Table 6.
Several schedules have been published for in-water recompression treatment, but little data on their efficacy is available. The Australian Navy tables and US Navy Tables may have the largest amount of empirical evidence supporting their efficacy. (Full article...) -
Freediving blackout, breath-hold blackout, or apnea blackout is a class of hypoxic blackout, a loss of consciousness caused by cerebral hypoxia towards the end of a breath-hold (freedive or dynamic apnea) dive, when the swimmer does not necessarily experience an urgent need to breathe and has no other obvious medical condition that might have caused it. It can be provoked by hyperventilating just before a dive, or as a consequence of the pressure reduction on ascent, or a combination of these. Victims are often established practitioners of breath-hold diving, are fit, strong swimmers and have not experienced problems before. Blackout may also be referred to as a syncope or fainting.
Divers and swimmers who black out or grey out underwater during a dive will usually drown unless rescued and resuscitated within a short time. Freediving blackout has a high fatality rate, and mostly involves males younger than 40 years, but is generally avoidable. Risk cannot be quantified, but is clearly increased by any level of hyperventilation.
Freediving blackout can occur on any dive profile: at constant depth, on an ascent from depth, or at the surface following ascent from depth and may be described by a number of terms depending on the dive profile and depth at which consciousness is lost. Blackout during a shallow dive differs from blackout during ascent from a deep dive in that blackout during ascent is precipitated by depressurisation on ascent from depth while blackout in consistently shallow water is a consequence of hypocapnia following hyperventilation. (Full article...) -
High-pressure nervous syndrome (HPNS – also known as high-pressure neurological syndrome) is a neurological and physiological diving disorder which can result when a diver descends below about 500 feet (150 m) using a breathing gas containing helium. The effects experienced, and the severity of those effects, depend on the rate of descent, the depth and the percentage of helium.
"Helium tremors" were described in 1965 by Royal Navy physiologist Peter B. Bennett. Soviet scientist G. L. Zal'tsman first reported on helium tremors in his experiments from 1961. These reports were not available in the West until 1967.
The term high-pressure nervous syndrome was first used by R. W. Brauer in 1968 to describe the combined symptoms of tremor, electroencephalography (EEG) changes, and somnolence that appeared during a 1,189-foot (362 m) chamber dive in Marseille. (Full article...) -
PC-based spirometer output
Fitness to dive (more specifically medical fitness to dive) refers to the medical and physical suitability of a diver to function safely in an underwater environment using diving equipment and related procedures. Depending on the circumstances, it may be established with a signed statement by the diver that they do not have any of the listed disqualifying conditions. The diver must be able to fulfill the ordinary physical requirements of diving as per the detailed medical examination by a physician registered as a medical examiner of divers following a procedural checklist. A legal document of fitness to dive issued by the medical examiner is also necessary.
The most important medical is the one before starting diving, as the diver can be screened to prevent exposure in the event of an imminent danger. The other important medicals are after some significant illness, where medical intervention is needed and has to be done by a doctor proficient in diving medicine, and can not be done by prescriptive rules.
Psychological factors can affect fitness to dive, particularly where they affect response to emergencies, or risk-taking behavior. The use of medical and recreational drugs can also influence fitness to dive, both for physiological and behavioral reasons. In some cases, prescription drug use might have a net positive effect when viably treating an underlying condition. However, the side effects of viable medication frequently have undesirable influences on the fitness of a diver. Most cases of recreational drug use result in an impaired fitness to dive, and a significantly increased risk of sub-optimal response to emergencies. (Full article...) -
Decompression sickness (DCS; also called divers' disease, the bends, aerobullosis, and caisson disease) is a medical condition caused by dissolved gases emerging from solution as bubbles inside the body tissues during decompression. DCS most commonly occurs during or soon after a decompression ascent from underwater diving, but can also result from other causes of depressurisation, such as emerging from a caisson, decompression from saturation, flying in an unpressurised aircraft at high altitude, and extravehicular activity from spacecraft. DCS and arterial gas embolism are collectively referred to as decompression illness.
Since bubbles can form in or migrate to any part of the body, DCS can produce many symptoms, and its effects may vary from joint pain and rashes to paralysis and death. DCS often causes air bubbles to settle in major joints like knees or elbows, causing individuals to bend over in excruciating pain, hence its common name, the bends. Individual susceptibility can vary from day to day, and different individuals under the same conditions may be affected differently or not at all. The classification of types of DCS according to symptoms has evolved since its original description in the 19th century. The severity of symptoms varies from barely noticeable to rapidly fatal.
Decompression sickness can occur after an exposure to increased pressure while breathing a gas with a metabolically inert component, then decompressing too fast for it to be harmlessly eliminated through respiration, or by decompression by an upward excursion from a condition of saturation by the inert breathing gas components, or by a combination of these routes. Theoretical decompression risk is controlled by the tissue compartment with the highest inert gas concentration, which for decompression from saturation is the slowest tissue to outgas.
The risk of DCS can be managed through proper decompression procedures, and contracting the condition has become uncommon. Its potential severity has driven much research to prevent it, and divers almost universally use decompression schedules or dive computers to limit their exposure and to monitor their ascent speed. If DCS is suspected, it is treated by hyperbaric oxygen therapy in a recompression chamber. Where a chamber is not accessible within a reasonable time frame, in-water recompression may be indicated for a narrow range of presentations, if there are suitably skilled personnel and appropriate equipment available on site. Diagnosis is confirmed by a positive response to the treatment. Early treatment results in a significantly higher chance of successful recovery. (Full article...) -
Hyperbaric medicine is medical treatment in which an increase in barometric pressure of typically air or oxygen is used. The immediate effects include reducing the size of gas emboli and raising the partial pressures of the gases present. Initial uses were in decompression sickness, and it also effective in certain cases of gas gangrene and carbon monoxide poisoning. There are potential hazards. Injury can occur at pressures as low as 2 psig (13.8 kPa) if a person is rapidly decompressed. If oxygen is used in the hyperbaric therapy, this can increase the fire hazard.
Hyperbaric oxygen therapy (HBOT), is the medical use of greater than 99% oxygen at an ambient pressure higher than atmospheric pressure, and therapeutic recompression. The equipment required consists of a pressure vessel for human occupancy (hyperbaric chamber), which may be of rigid or flexible construction, and a means of a controlled atmosphere supply. Treatment gas may be the ambient chamber gas, or delivered via a built-in breathing system. Operation is performed to a predetermined schedule by personnel who may adjust the schedule as required.
Hyperbaric air (HBA), consists of compressed atmospheric air (79% nitrogen, 21% oxygen, and minor gases) and is used for acute mountain sickness. This is created by placing the person in a portable hyperbaric air chamber and inflating that chamber up to 7.35 psi gauge (1.5 atmospheres absolute) using a foot-operated or electric air pump.
Chambers used in the US made for hyperbaric medicine fall under the jurisdiction of the federal Food and Drug Administration (FDA). The FDA requires hyperbaric chambers to comply with the American Society of Mechanical Engineers PVHO Codes and the National Fire Protection Association Standard 99, Health Care Facilities Code. Similar conditions apply in most other countries.
Other uses include arterial gas embolism caused by pulmonary barotrauma of ascent. In emergencies divers may sometimes be treated by in-water recompression (when a chamber is not available) if suitable diving equipment (to reasonably secure the airway) is available. (Full article...) -
Drowning is a type of suffocation induced by the submersion of the mouth and nose in a liquid. Submersion injury refers to both drowning and near-miss incidents. Most instances of fatal drowning occur alone or in situations where others present are either unaware of the victim's situation or unable to offer assistance. After successful resuscitation, drowning victims may experience breathing problems, confusion, or unconsciousness. Occasionally, victims may not begin experiencing these symptoms until several hours after they are rescued. An incident of drowning can also cause further complications for victims due to low body temperature, aspiration, or acute respiratory distress syndrome (respiratory failure from lung inflammation).
Drowning is more likely to happen when spending extended periods of time near large bodies of water. Risk factors for drowning include alcohol use, drug use, epilepsy, minimal swim training or a complete lack of training, and, in the case of children, a lack of supervision. Common drowning locations include natural and man-made bodies of water, bathtubs, and swimming pools.
Drowning occurs when a person spends too much time with their nose and mouth submerged in a liquid to the point of being unable to breathe. If this is not followed by an exit to the surface, low oxygen levels and excess carbon dioxide in the blood trigger a neurological state of breathing emergency, which results in increased physical distress and occasional contractions of the vocal folds. Significant amounts of water usually only enter the lungs later in the process.
While the word "drowning" is commonly associated with fatal results, drowning may be classified into three different types: drowning that results in death, drowning that results in long-lasting health problems, and drowning that results in no health complications. Sometimes the term "near-drowning" is used in the latter cases. Among children who survive, health problems occur in about 7.5% of cases.
Steps to prevent drowning include teaching children and adults to swim and to recognise unsafe water conditions, never swimming alone, use of personal flotation devices on boats and when swimming in unfavourable conditions, limiting or removing access to water (such as with fencing of swimming pools), and exercising appropriate supervision. Treatment of victims who are not breathing should begin with opening the airway and providing five breaths of mouth-to-mouth resuscitation. Cardiopulmonary resuscitation (CPR) is recommended for a person whose heart has stopped beating and has been underwater for less than an hour. (Full article...) -
Surfer's ear is the common name for an exostosis or abnormal bone growth within the ear canal. They are otherwise benign hyperplasias (growths) of the tympanic bone thought to be caused by frequent cold-water exposure. Cases are often asymptomatic. Surfer's ear is not the same as swimmer's ear, although infection can result as a side effect.
Irritation from cold wind and water exposure causes the bone surrounding the ear canal to develop lumps of new bony growth which constrict the ear canal. Where the ear canal is actually blocked by this condition, water and wax can become trapped and give rise to infection. The condition is so named due to its high prevalence among cold water surfers, although it can occur in any water temperature due to the evaporative cooling caused by wind and the presence of water in the ear canal.
Most avid surfers have at least some mild bone growths, causing little to no problems. The condition is gradually progressive and can generally be prevented by shielding the ear from water by consistently using earplugs and wetsuit hoods. The condition is not limited to surfing and can occur in any activity with cold, wet, windy conditions such as windsurfing, kayaking, sailing, jet skiing, kitesurfing, and diving. (Full article...) -
Motion sickness occurs due to a difference between actual and expected motion. Symptoms commonly include nausea, vomiting, cold sweat, headache, dizziness, tiredness, loss of appetite, and increased salivation. Complications may rarely include dehydration, electrolyte problems, or a lower esophageal tear.
The cause of motion sickness is either real or perceived motion. This may include car travel, air travel, sea travel, space travel, or reality simulation. Risk factors include pregnancy, migraines, and Ménière's disease. The diagnosis is based on symptoms.
Treatment may include behavioral measures or medications. Behavioral measures include keeping the head still and focusing on the horizon. Three types of medications are useful: antimuscarinics such as scopolamine, H1 antihistamines such as dimenhydrinate, and amphetamines such as dexamphetamine. Side effects, however, may limit the use of medications. A number of medications used for nausea such as ondansetron are not effective for motion sickness.
Many people can be affected with sufficient motion and some people will experience motion sickness at least once in their lifetime. Susceptibility, however, is variable, with about one-third of the population being susceptible while other people can be affected only under very extreme conditions. Women can be more easily affected than men. Motion sickness has been described since at least the time of Homer (c. eighth century BC). (Full article...) -
Nitrogen narcosis (also known as narcosis while diving, inert gas narcosis, raptures of the deep, Martini effect) is a reversible alteration in consciousness that occurs while diving at depth. It is caused by the anesthetic effect of certain gases at high partial pressure. The Greek word νάρκωσις (narkōsis), "the act of making numb", is derived from νάρκη (narkē), "numbness, torpor", a term used by Homer and Hippocrates. Narcosis produces a state similar to drunkenness (alcohol intoxication), or nitrous oxide inhalation. It can occur during shallow dives, but does not usually become noticeable at depths less than 30 metres (98 ft).
Except for helium and probably neon, all gases that can be breathed have a narcotic effect, although widely varying in degree. The effect is consistently greater for gases with a higher lipid solubility, and although the mechanism of this phenomenon is still not fully clear, there is good evidence that the two properties are mechanistically related. As depth increases, the mental impairment may become hazardous. Divers can learn to cope with some of the effects of narcosis, but it is impossible to develop a tolerance. Narcosis can affect all ambient pressure divers, although susceptibility varies widely among individuals and from dive to dive. The main modes of underwater diving that deal with its prevention and management are scuba diving and surface-supplied diving at depths greater than 30 metres (98 ft).
Narcosis may be completely reversed in a few minutes by ascending to a shallower depth, with no long-term effects. Thus narcosis while diving in open water rarely develops into a serious problem as long as the divers are aware of its symptoms, and are able to ascend to manage it. Diving much beyond 40 m (130 ft) is generally considered outside the scope of recreational diving. To dive at greater depths, as narcosis and oxygen toxicity become critical risk factors, gas mixtures such as trimix or heliox are used. These mixtures prevent or reduce narcosis by replacing some or all of the inert fraction of the breathing gas with non-narcotic helium.
There is a synergy between carbon dioxide toxicity and inert gas narcosis which is recognised but not fully understood. Conditions where high work of breathing due to gas density occur tend to exacerbate this effect. (Full article...) -
In aviation and underwater diving, alternobaric vertigo is dizziness resulting from unequal pressures being exerted between the inner ears, commonly due to one Eustachian tube being less patent than the other. (Full article...)
-
Decompression Illness (DCI) comprises two different conditions caused by rapid decompression of the body. These conditions present similar symptoms and require the same initial first aid. Scuba divers are trained to ascend slowly from depth to avoid DCI. Although the incidence is relatively rare, the consequences can be serious and potentially fatal, especially if untreated. (Full article...)
-
Oxygen toxicity is a condition resulting from the harmful effects of breathing molecular oxygen (O
2) at increased partial pressures. Severe cases can result in cell damage and death, with effects most often seen in the central nervous system, lungs, and eyes. Historically, the central nervous system condition was called the Paul Bert effect, and the pulmonary condition the Lorrain Smith effect, after the researchers who pioneered the discoveries and descriptions in the late 19th century. Oxygen toxicity is a concern for underwater divers, those on high concentrations of supplemental oxygen, and those undergoing hyperbaric oxygen therapy.
The result of breathing increased partial pressures of oxygen is hyperoxia, an excess of oxygen in body tissues. The body is affected in different ways depending on the type of exposure. Central nervous system toxicity is caused by short exposure to high partial pressures of oxygen at greater than atmospheric pressure. Pulmonary and ocular toxicity result from longer exposure to increased oxygen levels at normal pressure. Symptoms may include disorientation, breathing problems, and vision changes such as myopia. Prolonged exposure to above-normal oxygen partial pressures, or shorter exposures to very high partial pressures, can cause oxidative damage to cell membranes, collapse of the alveoli in the lungs, retinal detachment, and seizures. Oxygen toxicity is managed by reducing the exposure to increased oxygen levels. Studies show that, in the long term, a robust recovery from most types of oxygen toxicity is possible.
Protocols for avoidance of the effects of hyperoxia exist in fields where oxygen is breathed at higher-than-normal partial pressures, including underwater diving using compressed breathing gases, hyperbaric medicine, neonatal care and human spaceflight. These protocols have resulted in the increasing rarity of seizures due to oxygen toxicity, with pulmonary and ocular damage being largely confined to the problems of managing premature infants.
In recent years, oxygen has become available for recreational use in oxygen bars. The US Food and Drug Administration has warned those who have conditions such as heart or lung disease not to use oxygen bars. Scuba divers use breathing gases containing up to 100% oxygen, and should have specific training in using such gases. (Full article...) -
Diving disorders, or diving related medical conditions, are conditions associated with underwater diving, and include both conditions unique to underwater diving, and those that also occur during other activities. This second group further divides conditions caused by exposure to ambient pressures significantly different from surface atmospheric pressure, and a range of conditions caused by general environment and equipment associated with diving activities.
Disorders particularly associated with diving include those caused by variations in ambient pressure, such as barotraumas of descent and ascent, decompression sickness and those caused by exposure to elevated ambient pressure, such as some types of gas toxicity. There are also non-dysbaric disorders associated with diving, which include the effects of the aquatic environment, such as drowning, which also are common to other water users, and disorders caused by the equipment or associated factors, such as carbon dioxide and carbon monoxide poisoning. General environmental conditions can lead to another group of disorders, which include hypothermia and motion sickness, injuries by marine and aquatic organisms, contaminated waters, man-made hazards, and ergonomic problems with equipment. Finally there are pre-existing medical and psychological conditions which increase the risk of being affected by a diving disorder, which may be aggravated by adverse side effects of medications and other drug use.
Treatment depends on the specific disorder, but often includes oxygen therapy, which is standard first aid for most diving accidents, and is hardly ever contra-indicated for a person medically fit to dive, and hyperbaric therapy is the definitive treatment for decompression sickness. Screening for medical fitness to dive can reduce some of the risk for some of the disorders. (Full article...) -
Latent hypoxia affects the diver on ascent
Latent hypoxia is a condition where the oxygen content of the lungs and arterial blood is sufficient to maintain consciousness at a raised ambient pressure, but not when the pressure is reduced to normal atmospheric pressure. It usually occurs when a diver at depth has a lung gas and blood oxygen concentration that is sufficient to support consciousness at the pressure at that depth, but would be insufficient at surface pressure. This problem is associated with freediving blackout and the presence of hypoxic breathing gas mixtures in underwater breathing apparatus, particularly in diving rebreathers.
The term latent hypoxia strictly refers to the situation while the potential victim is at depth, still conscious, and not yet hypoxic, but is also loosely applied to the consequential blackout, which is a form of hypoxic blackout also referred to as blackout of ascent or deep water blackout, though deep water blackout is also used to refer to the final stage of nitrogen narcosis. (Full article...)
.jpg?lang=en)
.jpg?lang=en)
.jpg?lang=en)
Underwater tools and weapons
-
The APS underwater assault rifle (Russian: Автомат Подводный Специальный, romanized: Avtomat Podvodny Spetsialnyy, lit. 'Special Underwater Assault Rifle') is an underwater firearm designed by the Soviet Union in the early 1970s. It was adopted in 1975. Made by the Tula Arms Plant (Тульский Оружейный Завод, Tul'skiy Oruzheynyy Zavod) in Russia, it is exported by Rosoboronexport.
Under water, ordinary bullets are inaccurate and have a very short range. The APS fires a 120-millimetre-long (4.7 in), 5.66 mm calibre steel bolt specially designed for this weapon. Its magazine holds 26 rounds. The APS's barrel is not rifled; the fired projectile is kept in line by hydrodynamic effects; as a result, the APS is somewhat inaccurate when fired out of water.
The APS has a longer range and more penetrating power than spearguns. This is useful in such situations such as shooting an opposing diver through a reinforced dry suit, a protective helmet (whether air-holding or not), thick tough parts of breathing sets and their harnesses, and the plastic casings and transparent covers of some small underwater vehicles.
The APS is more powerful than a pistol, but is bulkier, heavier and takes longer to aim, particularly swinging its long barrel and large flat magazine sideways through water. (Full article...) -
A lifting bag is an item of diving equipment consisting of a robust and air-tight bag with straps, which is used to lift heavy objects underwater by means of the bag's buoyancy. The heavy object can either be moved horizontally underwater by the diver or sent unaccompanied to the surface.
Lift bag appropriate capacity should match the task at hand. If the lift bag is grossly oversized a runaway or otherwise out of control ascent may result. Commercially available lifting bags may incorporate dump valves to allow the operator to control the buoyancy during ascent, but this is a hazardous operation with high risk of entanglement in an uncontrolled lift or sinking. If a single bag is insufficient, multiple bags may be used, and should be distributed to suit the load.
There are also lifting bags used on land as short lift jacks for lifting cars or heavy loads or lifting bags which are used in machines as a type of pneumatic actuator which provides load over a large area. These lifting bags of the AS/CR type are for example used in the brake mechanism of rollercoasters. (Full article...) -
A limpet mine is a type of naval mine attached to a target by magnets. It is so named because of its superficial similarity to the shape of the limpet, a type of sea snail that clings tightly to rocks or other hard surfaces.
A swimmer or diver may attach the mine, which is usually designed with hollow compartments to give the mine just slight negative buoyancy, making it easier to handle underwater. (Full article...) -
Powerhead may refer to:
- Powerhead (firearm), a direct-contact, underwater firearm
- Powerhead (aquarium), a submersible aquarium pump
- Powerhead (rocket engine), the preburners and turbopumps of a pump-fed rocket engine (excludes the engine combustion chamber and nozzle)
- Powerhead (pump), the mechanical drive of any one of several non-aquarium pump types; marine propeller powerhead, fountain powerhead, etc.
-
Speargun
A speargun is a ranged underwater fishing device designed to launch a tethered spear or harpoon to impale fish or other marine animals and targets. Spearguns are used in sport fishing and underwater target shooting. The two basic types are pneumatic and elastic (powered by rubber bands). Spear types come in a number of varieties including threaded, break-away and lined. Floats and buoys are common accessories when targeting larger fish. (Full article...) -
The Hawaiian sling is a device used in spearfishing. The sling operates much like a bow and arrow does on land, but energy is stored in rubber tubing rather than a wooden or fiberglass bow. (Full article...)
-
The ADS (Russian: АДС - Автомат Двухсредный Специальный - Special Dual-environment Automatic rifle) is a Russian assault rifle specially made for combat divers. It is of a bullpup layout and is chambered in the 5.45×39mm M74 round. The ADS can adapt a suppressor and optical sights. (Full article...) -
The SPP-1 underwater pistol was made in the Soviet Union for use by Soviet frogmen as an underwater firearm. It was developed in the late 1960s and accepted for use in 1975. Under water, standard bullets are inaccurate and have very short range. This pistol instead fires a round-based 4.5 millimetres (0.18 in) caliber steel dart about 115 millimetres (4.5 in) long, weighing 12.8 grams (0.45 oz), which has longer range and more penetrating power than a speargun. The complete cartridge is 145 millimetres (5.7 in) long and weighs 17.5 grams (0.62 oz). (Full article...) -
Assembled tremie placing concrete underwater
A tremie is a watertight pipe, usually of about 250 mm inside diameter (150 to 300 mm), with a conical hopper at its upper end above the water level. It may have a loose plug or a valve at the bottom end. A tremie is usually used to pour concrete underwater in a way that avoids washout of cement from the mix due to turbulent water contact with the concrete while it is flowing. This produces a more reliable strength of the product. Common applications include:- Caissons, which are the foundations of bridges, among other things, that span bodies of water.
- Pilings.
- Monitoring wells. Builders use tremie methods for materials other than concrete, and for industries other than construction. For example, bentonite slurries for monitoring wells are often emplaced via tremie pipe.
-
The APS amphibious rifle, an underwater assault rifle
An underwater firearm is a firearm designed for use underwater. Underwater firearms or needleguns usually fire flechettes or spear-like bolts instead of standard bullets. These may be fired by pressurised gas. (Full article...) -
ROV at work in an underwater oil and gas field. The ROV is using a torque wrench to adjust a valve on a subsea structure.
A remotely operated underwater vehicle (ROUV) or remotely operated vehicle (ROV) is a free-swimming submersible craft used to perform underwater observation, inspection and physical tasks such as valve operations, hydraulic functions and other general tasks within the subsea oil and gas industry, military, scientific and other applications. ROVs can also carry tooling packages for undertaking specific tasks such as pull-in and connection of flexible flowlines and umbilicals, and component replacement. They are often used to do research and commercial work at great depths beyond the capacities of most submersibles and divers. (Full article...) -
Airlift dredging
An airlift is device based on a pipe, used in nautical archaeology to suck small objects, sand and mud from the sea bed and to transport the resulting debris upwards and away from its source. It is a type of suction dredge. A water dredge or water eductor may be used for the same purpose.
Typically, the airlift is constructed from a 3-metre to 10 metre long, 10 cm diameter pipe. A controllable compressed air supply vents into the inside, lower end of the pipe (The input end always being the lower end). Compressed air is injected into the pipe in one to three second bursts with an interval long enough to let the resulting bubble to rise to the higher, output end of the pipe. The bubble moves water through the pipe sucking debris from the lower end and depositing it from the upper end of the pipe. Ejected debris can be either cast off (as in simply removing overburden) or collected in a mesh cage for inspection (as more often is the case in nautical archaeology). It is often designed to be hand-operated by a diver.
Airlift pumps are used by water utilities, farmers and others to extract water from deep wells. In such cases the pipes can be 30, 60 or more meters deep underground. Airlift pumps are governed by the physics of two-phase flow. (Full article...) -
Polespear under tension with a cluster head attached.
A polespear (hand spear or gidgee) is an underwater tool used in spearfishing, consisting of a pole, a spear tip, and a rubber loop. Polespears are often mistakenly called Hawaiian slings, but the tools differ. A Hawaiian sling is akin to a slingshot or an underwater bow and arrow, since the spear and the propelling device are separate, while a polespear has the sling (rubber loop) attached to the spear. (Full article...) -
The Heckler & Koch P11 is an underwater firearm developed in 1976 by Heckler & Koch. It is loaded using a pepper-box-like assembly, containing five sealed barrels each containing an electrically-fired projectile. Two styles of barrel assembly can be used: one containing five 7.62×36mm flechette darts for use underwater, or five 133-grain bullets for use above water. (Full article...) -
The Gyrojet is a family of unique firearms developed in the 1960s named for the method of gyroscopically stabilizing its projectiles. Rather than inert bullets, Gyrojets fire small rockets called Microjets which have little recoil and do not require a heavy barrel or chamber to resist the pressure of the combustion gases. Velocity on leaving the tube was very low, but increased to around 1,250 feet per second (380 m/s) at 30 feet (9.1 m). The result is a very lightweight and transportable weapon.
Long out of production, today they are a coveted collector's item with prices for even the most common model ranging above $1,000. They are rarely fired; ammunition is scarce and can cost over $200 per round. (Full article...)
.jpg?lang=en)
History of underwater diving
-
Defenses against swimmer incursions are security methods developed to protect watercraft, ports and installations, and other sensitive resources in or near vulnerable waterways from potential threats or intrusions by swimmers or scuba divers. (Full article...)
-
The raid on Algiers, known in Italy as Operation N.A. 1 (Italian: Operazione N.A. 1), took place on 11 December 1942, in the Algiers harbour. Italian manned torpedoes and commando frogmen from the Decima Flottiglia MAS were brought to Algiers aboard the Perla-class submarine Ambra. The participating commandos were captured after setting limpet mines which sank two Allied ships and damaged two more. (Full article...) -
The auxiliary ship Olterra was a 5,000 ton Italian tanker scuttled by her own crew at Algeciras in the Bay of Gibraltar on 10 June 1940, after the entry of Italy in World War II. She was recovered in 1942 by a special unit of the Decima Flottiglia MAS to be used as an undercover base for manned torpedoes in order to attack Allied shipping at Gibraltar. (Full article...) -
The sinking of Rainbow Warrior, codenamed Opération Satanique, was an act of French state terrorism. Described as a "covert operation" by the "action" branch of the French foreign intelligence agency, the Directorate-General for External Security (DGSE), the terrorist attack was carried out on 10 July 1985. During the operation, two operatives (both French citizens) sank the flagship of the Greenpeace fleet, Rainbow Warrior, at the Port of Auckland on her way to a protest against a planned French nuclear test in Moruroa. Fernando Pereira, a photographer, drowned on the sinking ship.
The sinking was a cause of embarrassment to France and President François Mitterrand. They initially denied responsibility, but two French agents were captured by New Zealand Police and charged with arson, conspiracy to commit arson, willful damage and murder. It resulted in a scandal that led to the resignation of the French Defence Minister Charles Hernu, while the two agents pleaded guilty to manslaughter and were sentenced to ten years in New Zealand prison. Despite being sentenced to ten years' imprisonment, due to pressures from the French state they spent merely two years confined to the Polynesian island of Hao before being freed by the French government.
France was also forced to apologise and had to pay reparations to New Zealand, Pereira's family and Greenpeace. (Full article...) -
This painting, An Experiment on a Bird in the Air Pump by Joseph Wright of Derby, 1768, depicts an experiment originally performed by Robert Boyle in 1660.
Decompression in the context of diving derives from the reduction in ambient pressure experienced by the diver during the ascent at the end of a dive or hyperbaric exposure and refers to both the reduction in pressure and the process of allowing dissolved inert gases to be eliminated from the tissues during this reduction in pressure.
When a diver descends in the water column the ambient pressure rises. Breathing gas is supplied at the same pressure as the surrounding water, and some of this gas dissolves into the diver's blood and other tissues. Inert gas continues to be taken up until the gas dissolved in the diver is in a state of equilibrium with the breathing gas in the diver's lungs, (see: "Saturation diving"), or the diver moves up in the water column and reduces the ambient pressure of the breathing gas until the inert gases dissolved in the tissues are at a higher concentration than the equilibrium state, and start diffusing out again. Dissolved inert gases such as nitrogen or helium can form bubbles in the blood and tissues of the diver if the partial pressures of the dissolved gases in the diver get too high when compared to the ambient pressure. These bubbles, and products of injury caused by the bubbles, can cause damage to tissues generally known as decompression sickness or the bends. The immediate goal of controlled decompression is to avoid development of symptoms of bubble formation in the tissues of the diver, and the long-term goal is to also avoid complications due to sub-clinical decompression injury.
The symptoms of decompression sickness are known to be caused by damage resulting from the formation and growth of bubbles of inert gas within the tissues and by blockage of arterial blood supply to tissues by gas bubbles and other emboli consequential to bubble formation and tissue damage. The precise mechanisms of bubble formation and the damage they cause has been the subject of medical research for a considerable time and several hypotheses have been advanced and tested. Tables and algorithms for predicting the outcome of decompression schedules for specified hyperbaric exposures have been proposed, tested, and used, and usually found to be of some use but not entirely reliable. Decompression remains a procedure with some risk, but this has been reduced and is generally considered to be acceptable for dives within the well-tested range of commercial, military and recreational diving.
The first recorded experimental work related to decompression was conducted by Robert Boyle, who subjected experimental animals to reduced ambient pressure by use of a primitive vacuum pump. In the earliest experiments the subjects died from asphyxiation, but in later experiments, signs of what was later to become known as decompression sickness were observed. Later, when technological advances allowed the use of pressurisation of mines and caissons to exclude water ingress, miners were observed to present symptoms of what would become known as caisson disease, the bends, and decompression sickness. Once it was recognized that the symptoms were caused by gas bubbles, and that recompression could relieve the symptoms, further work showed that it was possible to avoid symptoms by slow decompression, and subsequently various theoretical models have been derived to predict low-risk decompression profiles and treatment of decompression sickness. (Full article...) -
Argentine forces invaded the Falkland Islands on 2 April 1982 in a military operation code-named Operation Rosario (Operación Rosario). The invasion served as a catalyst for the subsequent Falklands War. The Argentines mounted amphibious landings and the invasion ended with the surrender of Falkland Government House. (Full article...) -
State of the art in the late 1960s - Underwater photographer Odd Henrik Johnsen
Vintage scuba is scuba equipment dating from 1975 and earlier, and the practice of diving using such equipment. (Full article...) -
USS Westchester County (LST-1167) was a Terrebonne Parish-class tank landing ship built for the United States Navy at the tail end of the Korean War. Named for Westchester County, New York, she was the only U.S. Naval vessel to bear the name. The ship served in the Vietnam War and was damaged by limpet mines set by Viet Cong frogmen. It was repaired and later sold to the Turkish Navy and finally sunk as a target in 2014. (Full article...) -
Operation Thunderhead was a highly classified combat mission conducted by U.S. Navy SEAL Team One and Underwater Demolition Team 11 (UDT-11) in 1972. The mission was conducted off the coast of North Vietnam during the Vietnam War to rescue two U.S. airmen said to be escaping from a prisoner of war prison in Hanoi. The prisoners, including Air Force Colonel John A. Dramesi were planning to steal a boat and travel down the Red River to the Gulf of Tonkin.
Lieutenant Melvin Spence Dry was killed on the mission. He was the last SEAL lost during the Vietnam War. His father, retired Navy Captain Melvin H. Dry, spent the rest of his life trying to learn the circumstances surrounding his son's death. The details, however, were long shrouded in secrecy. (Full article...) -
The timeline of underwater diving technology is a chronological list of notable events in the history of the development of underwater diving equipment. With the partial exception of breath-hold diving, the development of underwater diving capacity, scope, and popularity, has been closely linked to available technology, and the physiological constraints of the underwater environment.
Primary constraints are:- the provision of breathing gas to allow endurance beyond the limits of a single breath,
- safely decompressing from high underwater pressure to surface pressure,
- the ability to see clearly enough to effectively perform the task,
- and sufficient mobility to get to and from the workplace.
-
16th century Islamic painting of Alexander the Great lowered in a glass diving bell
The history of underwater diving starts with freediving as a widespread means of hunting and gathering, both for food and other valuable resources such as pearls and coral. By classical Greek and Roman times commercial applications such as sponge diving and marine salvage were established. Military diving also has a long history, going back at least as far as the Peloponnesian War, with recreational and sporting applications being a recent development. Technological development in ambient pressure diving started with stone weights (skandalopetra) for fast descent. In the 16th and 17th centuries diving bells became functionally useful when a renewable supply of air could be provided to the diver at depth, and progressed to surface-supplied diving helmets—in effect miniature diving bells covering the diver's head and supplied with compressed air by manually operated pumps—which were improved by attaching a waterproof suit to the helmet and in the early 19th century became the standard diving dress.
Limitations in the mobility of the surface-supplied systems encouraged the development of both open circuit and closed circuit scuba in the 20th century, which allow the diver a much greater autonomy. These also became popular during World War II for clandestine military operations, and post-war for scientific, search and rescue, media diving, recreational and technical diving. The heavy free-flow surface-supplied copper helmets evolved into lightweight demand helmets, which are more economical with breathing gas, which is particularly important for deeper dives and expensive helium based breathing mixtures, and saturation diving reduced the risks of decompression sickness for deep and long exposures.
An alternative approach was the development of the "single atmosphere" or armoured suit, which isolates the diver from the pressure at depth, at the cost of great mechanical complexity and limited dexterity. The technology first became practicable in the middle 20th century. Isolation of the diver from the environment was taken further by the development of remotely operated underwater vehicles in the late 20th century, where the operator controls the ROV from the surface, and autonomous underwater vehicles, which dispense with an operator altogether. All of these modes are still in use and each has a range of applications where it has advantages over the others, though diving bells have largely been relegated to a means of transport for surface-supplied divers. In some cases, combinations are particularly effective, such as the simultaneous use of surface orientated or saturation surface-supplied diving equipment and work or observation class remotely operated vehicles.
Although the pathophysiology of decompression sickness is not yet fully understood, decompression practice has reached a stage where the risk is fairly low, and most incidences are successfully treated by therapeutic recompression and hyperbaric oxygen therapy. Mixed breathing gases are routinely used to reduce the effects of the hyperbaric environment on ambient pressure divers. (Full article...) -
Capt. Edward Deforest Thalmann, USN (ret.) (April 3, 1945 – July 24, 2004) was an American hyperbaric medicine specialist who was principally responsible for developing the current United States Navy dive tables for mixed-gas diving, which are based on his eponymous Thalmann Algorithm (VVAL18). At the time of his death, Thalmann was serving as assistant medical director of the Divers Alert Network (DAN) and an assistant clinical professor in anesthesiology at Duke University's Center for Hyperbaric Medicine and Environmental Physiology. (Full article...) -
Brian Andrew Hills, born 19 March 1934 in Cardiff, Wales, died 13 January 2006 in Brisbane, Queensland, was a physiologist who worked on decompression theory.
Early decompression work was done with Hugh LeMessurier's aeromedicine group at the department of Physiology, University of Adelaide. His "thermodynamic decompression model" was one of the first models in which decompression is controlled by the volume of gas bubbles coming out of solution. In this model, pain only DCS is modelled by a single tissue which is diffusion-limited for gas uptake, and bubble-formation during decompression causes "phase equilibration" of partial pressures between dissolved and free gases. The driving mechanism for gas elimination in this tissue is inherent unsaturation, also called partial pressure vacancy or the oxygen window, where oxygen metabolised is replaced by more soluble carbon dioxide. This model was used to explain the effectiveness of the Torres Strait Islands pearl divers' empirically developed decompression schedules, which used deeper decompression stops and less overall decompression time than the current naval decompression schedules. This trend to deeper decompression stops has become a feature of more recent decompression models.
Hills made a significant contribution to the mainstream scientific literature of some 186 articles between 1967 and 2006. The first 15 years of this contribution are mostly related to decompression theory. Other contributions to decompression science include the development of two early decompression computers, a method to detect tissue bubbles using electrical impedance, the use of kangaroo rats as animal models for decompression sickness, theoretical and experimental work on bubble nucleation, inert gas uptake and washout, acclimatisation to decompression sickness, and isobaric counterdiffusion. (Full article...) -
Operation Algeciras was a failed Argentine plan to sabotage a Royal Navy warship in Gibraltar during the Falklands War. The Argentine reasoning was that if the British military felt vulnerable in Europe, they would decide to keep some vessels in European waters rather than send them to the Falklands.
A commando team observed British naval traffic in the area from Spain during 1982, waiting to attack a target of opportunity when ordered, using frogmen and Italian limpet mines.
The plan was to launch divers from Algeciras, have them swim across the bay, to Gibraltar, under cover of darkness, attach the mines to a British naval ship and swim back to Algeciras. The timed detonators would cause the mines to explode after the divers had time to safely swim back across the bay. The plan was foiled when the Spanish police became suspicious of their behaviour and arrested them before any attack could be mounted. (Full article...)
Diver training, registration and certification
-
The International Diving Educators Association (IDEA) is an American diving training organization that was originally established in 1952 as part of the Florida Skin Divers Association (FSDA).
In the early days, Scuba Instructor training and certification was handled by the FSDA Scuba Training Committee which was also in charge of Standards & Procedures and new diver certifications. By 1976 there were more FSDA instructors outside of Florida than within the state.
In February 1976, the membership voted to expand the Scuba Training Committee to an international certification agency. The name was changed to the International Diving Educators Association (IDEA). In 1979, IDEA was reorganized and incorporated. IDEA made its first international appearance as a member of the Diving Equipment Manufacturers Association (DEMA) in Las Vegas in 1980. IDEA grew into over 30 foreign countries and across the continental United States. In 1996 IDEA became the fourth largest certification agency worldwide.
IDEA is American owned and operated by US military veterans and first responders. In 1987 the majority of certification agencies agreed to form a not-for-profit agency known as the Recreational Scuba Training Council (RSTC). The purpose of the RSTC is to allow member associations a vehicle for developing standards and to monitor quality control for the mutual benefit of the recreational diving industry and the general public.
IDEA, along with the other members of the RSTC, developed the standards for the Entry Level Scuba standards registered and approved by ANSI. IDEA has affiliates operating in Asia and Europe.
IDEA Europe is a member of RSTC Europe. (Full article...) -
The Nederlandse Onderwatersport Bond, (NOB) is the national governing body for recreational diving and underwater sports in the Netherlands. It was founded in 1962. In 2008 there were 290 scuba diving clubs and schools with a total of 20.000 members. The NOB is a member of CMAS Confédération Mondiale des Activités Subaquatiques. The aim of the NOB is to develop recreational scuba diving in the Netherlands. (Full article...)
-
This article lists notable underwater diver certification agencies. These include certification in cave diving, commercial diving, recreational diving, technical diving and freediving. Diver certification agencies are organisations which issue certification of competence in diving skills under their own name, and which train, assess, certify and register the instructors licensed to present courses following the standards for the certification they issue. They are expected to provide quality assurance for the training done to their standards by licensed schools and instructors. (Full article...)
-
Scuba diving education levels as used by ISO, PADI, CMAS, SSI and NAUI
Rescue Diver is a scuba diving certification level provided by several diver training agencies, such as PADI, SSI, SDI, and NAUI, which emphasises emergency response and diver rescue.
The certification level is loosely equivalent the CMAS ** Diver qualification and the BSAC sports diver, although the European courses tend to be longer and more intensive than their U.S. counterparts.
Most organizations have a minimum age requirement of 15 to undertake the Rescue Diver course, although PADI does permit certification of "Junior" Rescue Divers. (Full article...) -
The World Recreational Scuba Training Council (WRSTC) was founded in 1999 and is dedicated to creating minimum recreational diving training standards for the various recreational scuba diving certification agencies across the world. The WRSTC restricts its membership to national or regional councils. These councils consist of individual training organizations who collectively represent at least 50% of the annual diver certifications in the member council's country or region. A national council is referred to as a RSTC (Recreational Scuba Training Council).
Significant training organisations which are not associated with WRSTC via membership of its regional RSTCs include Confédération Mondiale des Activités Subaquatiques (CMAS). (Full article...) -
Scuba diving education levels as used by ISO, PADI, CMAS, SSI and NAUI
Supervised diver specifies the training and certification for recreational scuba divers in international standard ISO 24801-1 and the equivalent European Standard EN 14153-1. Various diving organizations offer diving training that meets the requirements of the Supervised Diver. A diving certification which corresponds to the Supervised Diver allows for recreational diving under the direct supervision of a divemaster or recreational diving instructor in open water. Most diving organizations recommend not to exceed a diving depth of 10 to 12 metres. After the successful completion of a training equivalent to the Supervised diver, training can be extended to the Autonomous diver certification level (according to ISO 24801-2).
Before initial diver training and thereafter at regular intervals, a diver should undergo a fitness to dive examination by a diving doctor. In some countries, such an examination is required by law and is a prerequisite for any training in many diving schools.
In some parts of the world there is minimum requirement which corresponds to the Autonomous Diver certification and an in-date medical certificate for hiring diving equipment and taking part in recreational diving. In these places a certificate which only corresponds to the Supervised Diver is regarded as insufficient. (Full article...) -
The International Organization for Standardization (ISO /ˈaɪsoʊ/; French: Organisation internationale de normalisation; Russian: Международная организация по стандартизации) is an independent, non-governmental, international standard development organization composed of representatives from the national standards organizations of member countries.
Membership requirements are given in Article 3 of the ISO Statutes.
ISO was founded on 23 February 1947, and (as of July 2024[update]) it has published over 25,000 international standards covering almost all aspects of technology and manufacturing. It has over 800 technical committees (TCs) and subcommittees (SCs) to take care of standards development.
The organization develops and publishes international standards in technical and nontechnical fields, including everything from manufactured products and technology to food safety, transport, IT, agriculture, and healthcare. More specialized topics like electrical and electronic engineering are instead handled by the International Electrotechnical Commission. It is headquartered in Geneva, Switzerland. The three official languages of ISO are English, French, and Russian. (Full article...) -
The European Underwater Federation (EUF) is an umbrella organisation representing the interests of scuba diver training organisations operating in both the not for profit and for profit sectors within Europe. (Full article...)
-
The National Association of Underwater Instructors (NAUI Worldwide) is a nonprofit association of scuba instructors founded in 1960 by Albert Tillman and Neal Hess.
NAUI primarily serves as a recreational dive certification and membership organization, providing international diver standards and education programs. NAUI is headquartered in Riverview, Florida near Tampa with dive and member instructors, resorts, stores, service and training centers located around the world. (Full article...) -
The Australian Diver Accreditation Scheme (ADAS) is an international commercial and occupational diver certification scheme. It has mutual recognition arrangements with other equivalent national schemes. ADAS qualifications have international recognition.
The original Australian and New Zealand (NZ) national occupational diver certification scheme was developed by the Australian government as a not-for-profit accreditation and certification scheme. It is administered on a cost-recovery basis by the ADAS Board under the direction of the Australian Department of Industry, Innovation and Science.
Training is provided by Accredited Training Establishments (ATEs) which are required to operate at the level of international best practice as defined by ADAS.
The scheme provides the following services:- developing training courses to meet industry needs
- certification of divers
- accreditation of training establishments
- national and international lobbying for the improved safety of divers
- promoting the mobility of ADAS licence holders around the world.
-
International Diving Schools Association (IDSA) was formed in 1982 with the primary purpose of developing common international standards for commercial diver training.
The Association is concerned with offshore, inshore and inland commercial diving and some specialist non-diving qualifications such as diving supervisors, diving medical technicians and life support technicians. It has published international diver training standards based on the consensus of members which provide a basic standard of comparison for commercial diver training standards, with the stated intention of:-- Improving safety
- Providing contractors with a direct input to the diver training syllabus
- Enabling contractors to bid across national borders on a more even playing field
- Improving diver quality
- Providing divers with greater job opportunities
The AIM of the IDSA:
To improve quality and safety in the international diving industry by standardizing training and sharing knowledge and best practices.
IDSA is providing a qualification card called the IDSA Qcard. The IDSA Qcard is for divers that has been trained in IDSA Full Member Schools, the school can ask the IDSA office to make the Qcard (in creditcard format). Contrators can check on the website the validity of the IDSA Qcard.www.idsaworldwide.org
All IDSA Full members has to pass the IDSA Audit.
IDSA provides a Table of Equivalence of various national commercial diver training standards.
IDSA standards are recognized in the Danish, Norwegian and Italian (Sicily) legislation. (Full article...) -
Discover Scuba Diving in St. Croix, US Virgin Islands
Introductory diving, also known as introductory scuba experience, trial diving and resort diving are dives where people without diver training or certification can experience scuba diving under the guidance of a recreational diving instructor. Introductory diving is an opportunity for interested people to find out by practical experience at a relatively low cost if they would be interested in greater involvement in scuba diving. For scuba instructors and diving schools is it an opportunity to acquire new customers. An introductory diving experience is much less time-consuming and costly than the completion of autonomous diver training, but has little lasting value, as it is an experience program only, for which no certification is issued. Introductory scuba diving experiences are intended to introduce people to recreational diving, and increase the potential client base of dive shops to include people who do not have the time or inclination to complete an entry-level certification program. (Full article...) -
Instructor and learner divers practicing scuba skills in confined water
A diving instructor is a person who trains, and usually also assesses competence, of underwater divers. This includes freedivers, recreational divers including the subcategory technical divers, and professional divers which includes military, commercial, public safety and scientific divers.
Depending on the jurisdiction, there will generally be specific published codes of practice and guidelines for training, competence and registration of diving instructors, as they have a duty of care to their clients, and operate in an environment with intrinsic hazards which may be unfamiliar to the lay person. Training and assessment will generally follow a diver training standard, and may use a diver training manual as source material.
Recreational diving instructors are usually registered members of one or more recreational diver certification agencies, and are generally registered to train and assess divers against specified certification standards. Originally these standards were at the discretion of each training and certification agency, but inter-agency and international standards now exist to ensure that the basic skills required for acceptable safety are included as a minimum standard for both instructors and recreational divers. Military diving instructors are generally members of the armed force for which they train personnel. Commercial diving instructors may be required to register with national government appointed organisations, and comply with specific training and assessment standards, but there may be other requirements in some parts of the world. (Full article...) -
The Cave Divers Association of Australia (CDAA) is a cave diving organisation which was formed in September 1973 to represent the interests of recreational scuba divers who dive in water-filled caves and sinkholes principally in the Lower South East (now called the Limestone Coast) of South Australia (SA) and secondly in other parts of Australia. Its formation occurred after a series of diving fatalities in waterfilled caves and sinkholes in the Mount Gambier region between 1969 and 1973 and in parallel to a Government of South Australia inquiry into these deaths. The CDAA's major achievement has been the dramatic reduction of fatalities via the introduction of a site rating scheme and an associated testing system which was brought in during the mid-1970s. While its major area of operation is in the Limestone Coast region of SA, it administers and supports cave diving activity in other parts of Australia including the Nullarbor Plain and Wellington, New South Wales. (Full article...)
.svg?lang=en){kind=logo}
Underwater diving organisations
-
Confédération Mondiale des Activités Subaquatiques (CMAS; known in English as the World Underwater Federation) is an international federation that represents underwater activities in underwater sport and underwater sciences, and oversees an international system of recreational snorkel and scuba diver training and recognition. Its foundation in Monaco during January 1959 makes it one of the world's oldest underwater diving organisations. (Full article...)
-
The Underwater Society of America (USOA) is the peak body for underwater sport and recreational diving in the United States. (Full article...)
-
British Underwater Sports Association (BUSA) is the British affiliate of the Sports Committee of Confédération Mondiale des Activités Subaquatiques (CMAS).
It was created in 1997 to fill the vacancy on the CMAS Sport Committee for the United Kingdom caused by the expulsion of the British Sub-Aqua Club from CMAS in order to ensure ongoing access to international competition offered by CMAS for British underwater sports teams.
Its members include the British Finswimming Association, British Octopush Association and British Spearfishing Association.
Its role is exclusively one of representation of British underwater sports at the international level. It does not have any recognition from the British government or the governments of the four constituent countries of the UK. BUSA members seeking government funding for sporting activities are required to obtain a letter of support from the National Governing Body (NGB) for Sub Aqua in their country. These include the BSAC for the UK and England, Northern Ireland Federation of Sub-Aqua Clubs for Northern Ireland, the Scottish Sub Aqua Club for Scotland and the Welsh Association of Sub Aqua Clubs for Wales. However, in June 2013, UK Sport and Sport England reportedly published their requirements for the acceptance of BUSA as the NGB for underwater sports in the UK. (Full article...) -
ARSBC Headquarters - Vancouver Maritime Museum
The Artificial Reef Society of British Columbia (ARSBC) is a registered non-profit society based in Vancouver, British Columbia (BC), and has been a registered tax-deductible charity in Canada since 1992.
Its aim is to create environmentally and economically sustainable artificial reefs (ARs) in British Columbia and around the world for the protection and enhancement of sensitive marine habitats, while also providing interesting destinations for the enjoyment of scuba divers.
The Society operates without any paid employees. Instead, it is driven by a dedicated volunteer Board of Directors alongside hundreds of volunteers hailing from British Columbia, Alberta, and the northwest United States, all actively involved in its projects, and is based out of the Vancouver Maritime Museum.
Since its founding in 1991, eight ships and one Boeing 737 have been sunk off the west coast of BC. These wreckages act as a safe starting point for creating additional biodiversity, similar to ship graveyards, and other man-made structures that became ARs without the toxic leaching hazardous materials such as paints and heavy metals.
The Artificial Reef Society of BC is a member of the Association of British Columbia Marine Industries as listed on their website. (Full article...) -
The Fédération Française d'Études et de Sports Sous-Marins (FFESSM) is a French sports federation specialized in recreational and competition underwater sports, like scuba diving and freediving. It is the main diver training organization in France.
The historical ancestor of the federation was created in 1948 under the name "Federation of societies for underwater fishing and swimming", and merged in 1955 with the "French federation of underwater activities" to become the current organization. It is one of the founding members of the Confédération Mondiale des Activités Subaquatiques (CMAS, World Confederation of Underwater Activities) created in 1959.
It has 140,000 members, 6,000 instructors, in 2,500 clubs. The federation has a delegation from the French Ministry of Sports to organize and develop scuba diving and related activities nationwide. (Full article...) -
British Octopush Association (BOA) is the governing body for underwater hockey in Great Britain. (Full article...)
-
The Aerospace Medical Association (AsMA) is the largest professional organization in the fields of aviation, space, and environmental medicine. The AsMA membership includes aerospace and hyperbaric medical specialists, scientists, flight nurses, physiologists, and researchers from all over the world. (Full article...)
-
Turkish Underwater Sports Federation (Turkish: Türkiye Sualtı Sporları Federasyonu, TSSF) is the governing body for both underwater sports and lifesaving in Turkey. Founded in 1982 and based in Ankara, the TSSF is a member of both the Confédération Mondiale des Activités Subaquatiques (CMAS) and the International Life Saving Federation (ILS). Its president is Ahmet İnkılap Obruk, who was also elected in 2009 to CMAS' board of directors for a term of four years. (Full article...)
-
Green Fins is an approach to sustainable marine tourism activities operating in Southeast Asia, Caribbean and the Indian Ocean that works with business operators, communities and governments. It helps to implement environmental standards for the diving and snorkelling industry through a code of conduct. The overall aim of the initiative is to mitigate damaging impacts to the marine environment from the marine tourism sector and improve sustainability. The code of conduct is a set of 15 points designed to tackle the most common and detrimental effects of scuba diving and snorkelling activities on the habitat in which they operate. (Full article...)
-
The European Diving Technology Committee eV. (EDTC) is an association registered in Kiel, Federal Republic of Germany for the purpose of making professional diving safer by creating international standards. Membership is open to all countries of the continent of Europe, with each country having one representative from the medical, industrial, government and trade union sectors. Some major diving industry associations are also involved. As of May 2016, 22 nations and 6 international non-governmental organisations were represented in the EDTC. (Full article...)
-
Association Internationale pour le Développement de l'Apnée (AIDA) (English: International Association for the Development of Apnea) is a worldwide rule- and record-keeping body for competitive breath holding events, also known as freediving. It sets standards for safety, comparability of Official World Record attempts and freedive education. AIDA International is the parent organization for national clubs of the same name. AIDA World Championships are periodically held. (Full article...)
-
The Nautical Archaeology Society (NAS) is a charity registered in England and Wales and in Scotland and is a company limited by guarantee.
The charitable aims and object of the company are to further research in Nautical Archaeology and publish the results of such research and to advance education and training in the techniques pertaining to the study of Nautical Archaeology for the benefit of the public.
Nautical archaeology is an archaeological sub-discipline more generally known as maritime archaeology. It encompasses the archaeology of shipwrecks, underwater archaeology in seas and elsewhere and the archaeology of related features.
The society's logo is derived from the image of a merchant sailing ship on a Bichrome Ware Cypro-Archaic pottery jug 750-600BC, thought to be from the Karpas Peninsula in North Cyprus. The ancient vessel is part of the British Museum's collection (GR 1926.6-28.9). An analysis of how the iconography on this pot has been misinterpreted in recent history and how the image has been adapted for the society's logo, can be read in the editorial of the society's publication the International Journal of Nautical Archaeology (2000) 29.1: 1–2. (Full article...) -
The National Oceanic and Atmospheric Administration (NOAA /ˈnoʊ.ə/ NOH-ə) is an American scientific and regulatory agency charged with forecasting weather, monitoring oceanic and atmospheric conditions, charting the seas, conducting deep-sea exploration, and managing fishing and protection of marine mammals and endangered species in the US exclusive economic zone. The agency is part of the United States Department of Commerce and is headquartered in Silver Spring, Maryland. (Full article...) -
The South African Underwater Sports Federation (SAUSF) is the official CMAS (World Underwater Federation) representative in the Republic of South Africa, and is affiliated to the South African Sports Confederation and Olympic Committee (SASCOC).
Formerly known as the South African Underwater Union (SAUU), the SAUSF has been responsible for the administrative duties of all underwater sports in South Africa. This originally included boating in connection with diving, and scuba training and recreational diving, but these two aspects of underwater sport developed into commercial activities and split from the SAUU to SASCA and CMAS-ISA respectively, whereas the competitive amateur sports like underwater hockey, spearfishing, finswimming and free diving remained with SAUU. (Full article...)
Underwater diving publications
-
The Last Dive: A Father and Son's Fatal Descent into the Ocean's Depths (2000) is a non-fiction book written by diver Bernie Chowdhury and published by HarperCollins. It documents the fatal dive of Chris Rouse, Sr. and Chris "Chrissy" Rouse, Jr., a father-son team who perished off the New Jersey coast in 1992. The author is a dive expert and was a friend of the Rouses.
The divers were exploring a German U-boat in 230 feet (70 m) of water off the coast of New Jersey. Although experienced in using technical diving gas mixtures such as "trimix" (adding helium gas to the nitrogen and oxygen found in air), they were diving on just compressed air. The pair had set out to retrieve the captain's log book from the so-called U-Who to "fulfill their dream of diving into fame." The U-boat was subsequently identified as U-869.
Chowdhury is a technical diver who, according to writer Neal Matthews' review of Robert Kurson's book Shadow Divers (2004), "was among the first to adapt cave-diving principles to deep-water wrecks". Also according to Matthews, "His book documents how the clashes of equipment philosophy between cave divers and wreck divers mirrored the clash of diving subcultures." (Full article...) -
The Silent World (subtitle: A story of undersea discovery and adventure, by the first men to swim at record depths with the freedom of fish) is a 1953 book co-authored by Captain Jacques-Yves Cousteau and Frédéric Dumas, and edited by James Dugan. (Full article...)
-
The NOAA Diving Manual: Diving for Science and Technology is a book originally published by the US Department of Commerce for use as training and operational guidance for National Oceanographic and Atmospheric Administration divers. NOAA also publish a Diving Standards and Safety Manual (NDSSM), which describes the minimum safety standards for their diving operations. Several editions of the diving manual have been published, and several editors and authors have contributed over the years. The book is widely used as a reference work by professional and recreational divers. (Full article...)
-
Goldfinder is a 2001 autobiography of British diver and treasure hunter Keith Jessop. It tells the story of Jessop's life and salvaging such underwater treasures as HMS Edinburgh, one of the greatest deep sea salvage operations and most financially rewarding in history.
One day in April 1981 Jessop's survey ship Dammtor began searching for the wreck of HMS Edinburgh in the Barents Sea in the Arctic Ocean of the coast of Russia. The ship had been sunk in battle in 1942 during World War II while carrying payment for military equipment from Murmansk in Russia to Scotland. His company, called Jessop Marine, won the contract for the salvage rights to the wreck of Edinburgh because his methods, involving complex cutting machinery and divers, were deemed more appropriate for a war grave, compared to the explosives-oriented methods of other companies.
In late April 1981, the survey ship discovered the ship's final resting place at an approximate position of 72.00°N, 35.00°E, at a depth of 245 metres (804 ft) within ten days of the start of the operation. Using specialist camera equipment, Dammtor took detailed film of the wreck, which allowed Jessop and his divers to carefully plan the salvage operation.
Later that year, on 30 August, the dive-support vessel Stephaniturm journeyed to the site, and salvage operations began in earnest. Leading the operation undersea, by mid-September of that year Jessop was able to salvage over $100,000,000 in Russian gold bullion (431 bars) from the wreck out of 465 over several days making him the greatest underwater treasurer in history.
Jessop died on 22 May 2010. (Full article...) -
Shadow Divers: The True Adventure of Two Americans Who Risked Everything to Solve One of the Last Mysteries of World War II is a 2004 non-fiction book by Robert Kurson recounting of the discovery of a World War II German U-boat 60 miles (97 km) off the coast of New Jersey, United States in 1991, exploration dives, and its eventual identification as U-869 lost on 11 February 1945. (Full article...)
-
The Darkness Beckons (ISBN 0-939748-32-0) is a book about the history of UK cave diving by Martyn Farr. It is considered the definitive work on the subject. Farr was a major figure in UK diving at a time when many of the original participants were still alive and available for interview. The first edition of the book was published in 1980. A second edition was published in 1991, followed by a substantially rewritten third edition on 3 July 2017. (Full article...)
Recognised content
 | This is a list of recognized content, updated weekly by JL-Bot (talk · contribs) (typically on Saturdays). There is no need to edit the list yourself. If an article is missing from the list, make sure it is tagged (e.g. {{WikiProject Scuba diving}}) or categorized correctly and wait for the next update. See WP:RECOG for configuration options. |
Featured articles
Main page featured articles
Featured lists
Good articles
115 (barge)- USS Arkansas (BB-33)
- HMSAS Bloemfontein
- HMS Boadicea (H65)
- Bowie Seamount
- SS Chester A. Congdon
- Decompression sickness
- Decompression (diving)
- Decompression equipment
- Decompression practice
- Dive profile
- Diver communications
- SS Emperor
- SMS Geier
- SAS Good Hope
- History of decompression research and development
- SS Manasoo
- Nitrogen narcosis
- Pearl and Hermes Atoll
- HMS Pelorus (J291)
- HMS Prince of Wales (53)
- HMS Safari
- Japanese cruiser Sakawa
- Salt water aspiration syndrome
- Solo diving
- Special Air Service Regiment
- Special Air Service
- Special Boat Service
- HMS Thames (1885)
- SAS Transvaal
- German submarine U-40 (1938)
- USS Yancey
Former good articles
In the News articles
-
The hand signal "OK"
Diver communications are the methods used by divers to communicate with each other or with surface members of the dive team. In professional diving, diver communication is usually between a single working diver and the diving supervisor at the surface control point. This is considered important both for managing the diving work, and as a safety measure for monitoring the condition of the diver. The traditional method of communication was by line signals, but this has been superseded by voice communication, and line signals are now used in emergencies when voice communications have failed. Surface supplied divers often carry a closed circuit video camera on the helmet which allows the surface team to see what the diver is doing and to be involved in inspection tasks. This can also be used to transmit hand signals to the surface if voice communications fails. Underwater slates may be used to write text messages which can be shown to other divers, and there are some dive computers which allow a limited number of pre-programmed text messages to be sent through-water to other divers or surface personnel with compatible equipment.
Communication between divers and between surface personnel and divers is imperfect at best, and non-existent at worst, as a consequence of the physical characteristics of water. This prevents divers from performing at their full potential. Voice communication is the most generally useful format underwater, as visual forms are more affected by visibility, and written communication and signing are relatively slow and restricted by diving equipment.
Recreational divers do not usually have access to voice communication equipment, and it does not generally work with a standard scuba demand valve mouthpiece, so they use other signals. Hand signals are generally used when visibility allows, and there are a range of commonly used signals, with some variations. These signals are often also used by professional divers to communicate with other divers. There is also a range of other special purpose non-verbal signals, mostly used for safety and emergency communications. (Full article...) -
Solo diver surveying a dive site. The bailout cylinder can be seen slung at the diver's left side
Solo diving is the practice of self-sufficient underwater diving without a "dive buddy", particularly with reference to scuba diving, but the term is also applied to freediving. Professionally, solo diving has always been an option which depends on operational requirements and risk assessment. Surface supplied diving and atmospheric suit diving are commonly single diver underwater activities but are accompanied by an on-surface support team dedicated to the safety of the diver, including a stand-by diver, and are not considered solo diving in this sense.
Solo freediving has occurred for millennia as evidenced by artifacts dating back to the ancient people of Mesopotamia when people dived to gather food and to collect pearl oysters. It wasn't until the 1950s, with the development of formalised scuba diving training, that recreational solo diving was deemed to be dangerous, particularly for beginners. In an effort to mitigate associated risks, some scuba certification agencies incorporated the practice of buddy diving into their diver training programmes. The true risk of solo diving relative to buddy diving in the same environmental conditions has never been reliably established, and may have been significantly overstated by some organisations, though it is generally recognised that buddy and team diving, when performed as specified in the manuals, will enhance safety to some extent depending on circumstances.
Some divers, typically those with advanced underwater skills, prefer solo diving over buddy diving and acknowledge responsibility for their own safety. One of the more controversial reasons given being the uncertain competence of arbitrarily allocated dive buddies imposed on divers by service providers protected from liability by waivers. Others simply prefer solitude while communing with nature, or find the burden of continuously monitoring another person reduces their enjoyment of the activity, or engage in activities which are incompatible with effective buddy diving practices, and accept the possibility of slightly increased risk, just as others accept the increased risk associated with deeper dives, planned decompression, or penetration under an overhead.
The recreational solo diver uses enhanced procedures, skills and equipment to mitigate the risks associated with not having another competent diver immediately available to assist if something goes wrong. The skills and procedures may be learned through a variety of effective methods to achieve appropriate competence, including formal training programmes with associated assessment and certification. Recreational solo diving, once discouraged by most training agencies, has been accepted since the late 1990s by some agencies that will train and certify experienced divers skilled in self-sufficiency and the use of redundant backup scuba equipment. In most countries there is no legal impediment to solo recreational diving, with or without certification. (Full article...) -
Decompression sickness (DCS; also called divers' disease, the bends, aerobullosis, and caisson disease) is a medical condition caused by dissolved gases emerging from solution as bubbles inside the body tissues during decompression. DCS most commonly occurs during or soon after a decompression ascent from underwater diving, but can also result from other causes of depressurisation, such as emerging from a caisson, decompression from saturation, flying in an unpressurised aircraft at high altitude, and extravehicular activity from spacecraft. DCS and arterial gas embolism are collectively referred to as decompression illness.
Since bubbles can form in or migrate to any part of the body, DCS can produce many symptoms, and its effects may vary from joint pain and rashes to paralysis and death. DCS often causes air bubbles to settle in major joints like knees or elbows, causing individuals to bend over in excruciating pain, hence its common name, the bends. Individual susceptibility can vary from day to day, and different individuals under the same conditions may be affected differently or not at all. The classification of types of DCS according to symptoms has evolved since its original description in the 19th century. The severity of symptoms varies from barely noticeable to rapidly fatal.
Decompression sickness can occur after an exposure to increased pressure while breathing a gas with a metabolically inert component, then decompressing too fast for it to be harmlessly eliminated through respiration, or by decompression by an upward excursion from a condition of saturation by the inert breathing gas components, or by a combination of these routes. Theoretical decompression risk is controlled by the tissue compartment with the highest inert gas concentration, which for decompression from saturation is the slowest tissue to outgas.
The risk of DCS can be managed through proper decompression procedures, and contracting the condition has become uncommon. Its potential severity has driven much research to prevent it, and divers almost universally use decompression schedules or dive computers to limit their exposure and to monitor their ascent speed. If DCS is suspected, it is treated by hyperbaric oxygen therapy in a recompression chamber. Where a chamber is not accessible within a reasonable time frame, in-water recompression may be indicated for a narrow range of presentations, if there are suitably skilled personnel and appropriate equipment available on site. Diagnosis is confirmed by a positive response to the treatment. Early treatment results in a significantly higher chance of successful recovery. (Full article...) -
Oxygen toxicity is a condition resulting from the harmful effects of breathing molecular oxygen (O
2) at increased partial pressures. Severe cases can result in cell damage and death, with effects most often seen in the central nervous system, lungs, and eyes. Historically, the central nervous system condition was called the Paul Bert effect, and the pulmonary condition the Lorrain Smith effect, after the researchers who pioneered the discoveries and descriptions in the late 19th century. Oxygen toxicity is a concern for underwater divers, those on high concentrations of supplemental oxygen, and those undergoing hyperbaric oxygen therapy.
The result of breathing increased partial pressures of oxygen is hyperoxia, an excess of oxygen in body tissues. The body is affected in different ways depending on the type of exposure. Central nervous system toxicity is caused by short exposure to high partial pressures of oxygen at greater than atmospheric pressure. Pulmonary and ocular toxicity result from longer exposure to increased oxygen levels at normal pressure. Symptoms may include disorientation, breathing problems, and vision changes such as myopia. Prolonged exposure to above-normal oxygen partial pressures, or shorter exposures to very high partial pressures, can cause oxidative damage to cell membranes, collapse of the alveoli in the lungs, retinal detachment, and seizures. Oxygen toxicity is managed by reducing the exposure to increased oxygen levels. Studies show that, in the long term, a robust recovery from most types of oxygen toxicity is possible.
Protocols for avoidance of the effects of hyperoxia exist in fields where oxygen is breathed at higher-than-normal partial pressures, including underwater diving using compressed breathing gases, hyperbaric medicine, neonatal care and human spaceflight. These protocols have resulted in the increasing rarity of seizures due to oxygen toxicity, with pulmonary and ocular damage being largely confined to the problems of managing premature infants.
In recent years, oxygen has become available for recreational use in oxygen bars. The US Food and Drug Administration has warned those who have conditions such as heart or lung disease not to use oxygen bars. Scuba divers use breathing gases containing up to 100% oxygen, and should have specific training in using such gases. (Full article...) -
A recompression chamber is used to treat some diving disorders and for training divers to recognise the symptoms.
Diving disorders are medical conditions specifically arising from ambient pressure underwater diving with breathing apparatus. The signs and symptoms of these may present during a dive, on surfacing, or up to several hours after a dive.
The principal conditions are decompression illness (which covers decompression sickness and arterial gas embolism), nitrogen narcosis, high pressure nervous syndrome, oxygen toxicity, and pulmonary barotrauma (burst lung). Although some of these may occur in other settings, they are of particular concern during diving activities.
The disorders are caused by breathing gas at the high pressures encountered at the depth of the water and divers will often breathe a gas mixture different from air to mitigate these effects. Nitrox, which contains more oxygen and less nitrogen, is commonly used as a breathing gas to reduce the risk of decompression sickness at recreational depths (up to 34 meters or 112 feet for 32% oxygen). Helium may be added to reduce the amount of nitrogen and oxygen in the gas mixture when diving deeper, to reduce the effects of narcosis, to avoid the risk of oxygen toxicity, and to reduce work of breathing. This is complicated at depths beyond about 150 metres (500 ft), because a helium–oxygen mixture (heliox) then causes high pressure nervous syndrome. More exotic mixtures such as hydreliox, a hydrogen–helium–oxygen mixture, are used at extreme depths to counteract this. (Full article...) -
This painting, An Experiment on a Bird in the Air Pump by Joseph Wright of Derby, 1768, depicts an experiment originally performed by Robert Boyle in 1660.
Decompression in the context of diving derives from the reduction in ambient pressure experienced by the diver during the ascent at the end of a dive or hyperbaric exposure and refers to both the reduction in pressure and the process of allowing dissolved inert gases to be eliminated from the tissues during this reduction in pressure.
When a diver descends in the water column the ambient pressure rises. Breathing gas is supplied at the same pressure as the surrounding water, and some of this gas dissolves into the diver's blood and other tissues. Inert gas continues to be taken up until the gas dissolved in the diver is in a state of equilibrium with the breathing gas in the diver's lungs, (see: "Saturation diving"), or the diver moves up in the water column and reduces the ambient pressure of the breathing gas until the inert gases dissolved in the tissues are at a higher concentration than the equilibrium state, and start diffusing out again. Dissolved inert gases such as nitrogen or helium can form bubbles in the blood and tissues of the diver if the partial pressures of the dissolved gases in the diver get too high when compared to the ambient pressure. These bubbles, and products of injury caused by the bubbles, can cause damage to tissues generally known as decompression sickness or the bends. The immediate goal of controlled decompression is to avoid development of symptoms of bubble formation in the tissues of the diver, and the long-term goal is to also avoid complications due to sub-clinical decompression injury.
The symptoms of decompression sickness are known to be caused by damage resulting from the formation and growth of bubbles of inert gas within the tissues and by blockage of arterial blood supply to tissues by gas bubbles and other emboli consequential to bubble formation and tissue damage. The precise mechanisms of bubble formation and the damage they cause has been the subject of medical research for a considerable time and several hypotheses have been advanced and tested. Tables and algorithms for predicting the outcome of decompression schedules for specified hyperbaric exposures have been proposed, tested, and used, and usually found to be of some use but not entirely reliable. Decompression remains a procedure with some risk, but this has been reduced and is generally considered to be acceptable for dives within the well-tested range of commercial, military and recreational diving.
The first recorded experimental work related to decompression was conducted by Robert Boyle, who subjected experimental animals to reduced ambient pressure by use of a primitive vacuum pump. In the earliest experiments the subjects died from asphyxiation, but in later experiments, signs of what was later to become known as decompression sickness were observed. Later, when technological advances allowed the use of pressurisation of mines and caissons to exclude water ingress, miners were observed to present symptoms of what would become known as caisson disease, the bends, and decompression sickness. Once it was recognized that the symptoms were caused by gas bubbles, and that recompression could relieve the symptoms, further work showed that it was possible to avoid symptoms by slow decompression, and subsequently various theoretical models have been derived to predict low-risk decompression profiles and treatment of decompression sickness. (Full article...) -
A diving cylinder or diving gas cylinder is a gas cylinder used to store and transport high pressure gas used in diving operations. This may be breathing gas used with a scuba set, in which case the cylinder may also be referred to as a scuba cylinder, scuba tank or diving tank. When used for an emergency gas supply for surface supplied diving or scuba, it may be referred to as a bailout cylinder or bailout bottle. It may also be used for surface-supplied diving or as decompression gas . A diving cylinder may also be used to supply inflation gas for a dry suit or buoyancy compensator. Cylinders provide gas to the diver through the demand valve of a diving regulator or the breathing loop of a diving re-breather.
Diving cylinders are usually manufactured from aluminum or steel alloys, and when used on a scuba set are normally fitted with one of two common types of cylinder valve for filling and connection to the regulator. Other accessories such as manifolds, cylinder bands, protective nets and boots and carrying handles may be provided. Various configurations of harness may be used by the diver to carry a cylinder or cylinders while diving, depending on the application. Cylinders used for scuba typically have an internal volume (known as water capacity) of between 3 and 18 litres (0.11 and 0.64 cu ft) and a maximum working pressure rating from 184 to 300 bars (2,670 to 4,350 psi). Cylinders are also available in smaller sizes, such as 0.5, 1.5 and 2 litres, however these are usually used for purposes such as inflation of surface marker buoys, dry suits and buoyancy compensators rather than breathing. Scuba divers may dive with a single cylinder, a pair of similar cylinders, or a main cylinder and a smaller "pony" cylinder, carried on the diver's back or clipped onto the harness at the side. Paired cylinders may be manifolded together or independent. In technical diving, more than two scuba cylinders may be needed.
When pressurized, the gas is compressed up to several hundred times atmospheric pressure. The selection of an appropriate set of diving cylinders for a diving operation is based on the amount of gas required to safely complete the dive. Diving cylinders are most commonly filled with air, but because the main components of air can cause problems when breathed underwater at higher ambient pressure, divers may choose to breathe from cylinders filled with mixtures of gases other than air. Many jurisdictions have regulations that govern the filling, recording of contents, and labeling for diving cylinders. Periodic testing and inspection of diving cylinders is often obligatory to ensure the safety of operators of filling stations. Pressurized diving cylinders are considered dangerous goods for commercial transportation, and regional and international standards for colouring and labeling may also apply. (Full article...) -
The Special Boat Service (SBS) is the special forces unit of the United Kingdom's Royal Navy. The SBS can trace its origins back to the Second World War when the Army Special Boat Section was formed in 1940. After the Second World War, the Royal Navy formed special forces with several name changes—Special Boat Company was adopted in 1951 and re-designated as the Special Boat Squadron in 1974—until on 28 July 1987 when the unit was renamed as the Special Boat Service after assuming responsibility for maritime counter-terrorism. Most of the operations conducted by the SBS are highly classified, and are rarely commented on by the British government or the Ministry of Defence, owing to their sensitive nature.
The Special Boat Service is the naval special forces unit of the United Kingdom Special Forces and is described as the sister unit of the British Army 22 Special Air Service Regiment (22 SAS), with both under the operational control of the Director Special Forces. In October 2001, full command of the SBS was transferred from the Commandant General Royal Marines to the Commander-in-Chief Fleet. On 18 November 2003, the SBS were given their own cap badge with the motto "By Strength and Guile". SBS operators are mostly recruited from the Royal Marines Commandos. (Full article...) -
Dive profile of an actual dive as recorded by a personal dive computer and displayed on a desktop screen using dive logging software. In this case depth is in metres.
A dive profile is a description of a diver's pressure exposure over time. It may be as simple as just a depth and time pair, as in: "sixty for twenty," (a bottom time of 20 minutes at a depth of 60 feet) or as complex as a second by second graphical representation of depth and time recorded by a personal dive computer. Several common types of dive profile are specifically named, and these may be characteristic of the purpose of the dive. For example, a working dive at a limited location will often follow a constant depth (square) profile, and a recreational dive is likely to follow a multilevel profile, as the divers start deep and work their way up a reef to get the most out of the available breathing gas. The names are usually descriptive of the graphic appearance.
The intended dive profile is useful as a planning tool as an indication of the risks of decompression sickness and oxygen toxicity for the exposure, to calculate a decompression schedule for the dive, and also for estimating the volume of open-circuit breathing gas needed for a planned dive, as these depend in part upon the depth and duration of the dive. A dive profile diagram is conventionally drawn with elapsed time running from left to right and depth increasing down the page.
Many personal dive computers record the instantaneous depth at small time increments during the dive. This data can sometimes be displayed directly on the dive computer or more often downloaded to a personal computer, tablet, or smartphone and displayed in graphic form as a dive profile. (Full article...) -
There are several categories of decompression equipment used to help divers decompress, which is the process required to allow divers to return to the surface safely after spending time underwater at higher ambient pressures.
Decompression obligation for a given dive profile must be calculated and monitored to ensure that the risk of decompression sickness is controlled. Some equipment is specifically for these functions, both during planning before the dive and during the dive. Other equipment is used to mark the underwater position of the diver, as a position reference in low visibility or currents, or to assist the diver's ascent and control the depth.
Decompression may be shortened ("accelerated") by breathing an oxygen-rich "decompression gas" such as a nitrox blend or pure oxygen. The high partial pressure of oxygen in such decompression mixes produces the effect known as the oxygen window. This decompression gas is often carried by scuba divers in side-slung cylinders. Cave divers who can only return by a single route, can leave decompression gas cylinders attached to the guideline ("stage" or "drop cylinders") at the points where they will be used. Surface-supplied divers will have the composition of the breathing gas controlled at the gas panel.
Divers with long decompression obligations may be decompressed inside gas filled hyperbaric chambers in the water or at the surface, and in the extreme case, saturation divers are only decompressed at the end of a project, contract, or tour of duty that may be several weeks long. (Full article...) -
Bowie Seamount, or SG̱áan Ḵínghlas ("Supernatural One Looking Outward") in the Haida language, is a large submarine volcano in the northeastern Pacific Ocean, located 180 km (110 mi) west of Haida Gwaii, British Columbia, Canada. The seamount is also known as Bowie Bank. The English name for the feature is after William Bowie of the United States Coast and Geodetic Survey.
The volcano has a flat-topped summit rising about 3,000 m (10,000 ft) above the seabed, to 24 m (79 ft) below sea level. The seamount lies at the southern end of a long underwater volcanic mountain range called the Pratt-Welker or Kodiak-Bowie Seamount chain, stretching from the Aleutian Trench in the north almost to Haida Gwaii in the south.
Bowie Seamount lies on the Pacific Plate, a large segment of the Earth's surface which moves in a northwestern direction under the Pacific Ocean. It is adjacent to two other submarine volcanoes; Hodgkins Seamount on its northern flank and Graham Seamount on its eastern flank. (Full article...) -
Nitrogen narcosis (also known as narcosis while diving, inert gas narcosis, raptures of the deep, Martini effect) is a reversible alteration in consciousness that occurs while diving at depth. It is caused by the anesthetic effect of certain gases at high partial pressure. The Greek word νάρκωσις (narkōsis), "the act of making numb", is derived from νάρκη (narkē), "numbness, torpor", a term used by Homer and Hippocrates. Narcosis produces a state similar to drunkenness (alcohol intoxication), or nitrous oxide inhalation. It can occur during shallow dives, but does not usually become noticeable at depths less than 30 metres (98 ft).
Except for helium and probably neon, all gases that can be breathed have a narcotic effect, although widely varying in degree. The effect is consistently greater for gases with a higher lipid solubility, and although the mechanism of this phenomenon is still not fully clear, there is good evidence that the two properties are mechanistically related. As depth increases, the mental impairment may become hazardous. Divers can learn to cope with some of the effects of narcosis, but it is impossible to develop a tolerance. Narcosis can affect all ambient pressure divers, although susceptibility varies widely among individuals and from dive to dive. The main modes of underwater diving that deal with its prevention and management are scuba diving and surface-supplied diving at depths greater than 30 metres (98 ft).
Narcosis may be completely reversed in a few minutes by ascending to a shallower depth, with no long-term effects. Thus narcosis while diving in open water rarely develops into a serious problem as long as the divers are aware of its symptoms, and are able to ascend to manage it. Diving much beyond 40 m (130 ft) is generally considered outside the scope of recreational diving. To dive at greater depths, as narcosis and oxygen toxicity become critical risk factors, gas mixtures such as trimix or heliox are used. These mixtures prevent or reduce narcosis by replacing some or all of the inert fraction of the breathing gas with non-narcotic helium.
There is a synergy between carbon dioxide toxicity and inert gas narcosis which is recognised but not fully understood. Conditions where high work of breathing due to gas density occur tend to exacerbate this effect. (Full article...) -
Divers decompressing in the water at the end of a dive
The decompression of a diver is the reduction in ambient pressure experienced during ascent from depth. It is also the process of elimination of dissolved inert gases from the diver's body which accumulate during ascent, largely during pauses in the ascent known as decompression stops, and after surfacing, until the gas concentrations reach equilibrium. Divers breathing gas at ambient pressure need to ascend at a rate determined by their exposure to pressure and the breathing gas in use. A diver who only breathes gas at atmospheric pressure when free-diving or snorkelling will not usually need to decompress. Divers using an atmospheric diving suit do not need to decompress as they are never exposed to high ambient pressure.
When a diver descends in the water, the hydrostatic pressure, and therefore the ambient pressure, rises. Because breathing gas is supplied at ambient pressure, some of this gas dissolves into the diver's blood and is transferred by the blood to other tissues. Inert gas such as nitrogen or helium continues to be taken up until the gas dissolved in the diver is in a state of equilibrium with the breathing gas in the diver's lungs, at which point the diver is saturated for that depth and breathing mixture, or the depth, and therefore the pressure, is changed, or the partial pressures of the gases are changed by modifying the breathing gas mixture. During ascent, the ambient pressure is reduced, and at some stage the inert gases dissolved in any given tissue will be at a higher concentration than the equilibrium state and start to diffuse out again. If the pressure reduction is sufficient, excess gas may form bubbles, which may lead to decompression sickness, a possibly debilitating or life-threatening condition. It is essential that divers manage their decompression to avoid excessive bubble formation and decompression sickness. A mismanaged decompression usually results from reducing the ambient pressure too quickly for the amount of gas in solution to be eliminated safely. These bubbles may block arterial blood supply to tissues or directly cause tissue damage. If the decompression is effective, the asymptomatic venous microbubbles present after most dives are eliminated from the diver's body in the alveolar capillary beds of the lungs. If they are not given enough time, or more bubbles are created than can be eliminated safely, the bubbles grow in size and number causing the symptoms and injuries of decompression sickness. The immediate goal of controlled decompression is to avoid development of symptoms of bubble formation in the tissues of the diver, and the long-term goal is to avoid complications due to sub-clinical decompression injury.
The mechanisms of bubble formation and the damage bubbles cause has been the subject of medical research for a considerable time and several hypotheses have been advanced and tested. Tables and algorithms for predicting the outcome of decompression schedules for specified hyperbaric exposures have been proposed, tested and used, and in many cases, superseded. Although constantly refined and generally considered acceptably reliable, the actual outcome for any individual diver remains slightly unpredictable. Although decompression retains some risk, this is now generally considered acceptable for dives within the well tested range of normal recreational and professional diving. Nevertheless, currently popular decompression procedures advise a 'safety stop' additional to any stops required by the algorithm, usually of about three to five minutes at 3 to 6 metres (10 to 20 ft), particularly 1 on an otherwise continuous no-stop ascent.
Decompression may be continuous or staged. A staged decompression ascent is interrupted by decompression stops at calculated depth intervals, but the entire ascent is actually part of the decompression and the ascent rate is critical to harmless elimination of inert gas. A no-decompression dive, or more accurately, a dive with no-stop decompression, relies on limiting the ascent rate for avoidance of excessive bubble formation in the fastest tissues. The elapsed time at surface pressure immediately after a dive is also an important part of decompression and can be thought of as the last decompression stop of a dive. It can take up to 24 hours for the body to return to its normal atmospheric levels of inert gas saturation after a dive. When time is spent on the surface between dives this is known as the "surface interval" and is considered when calculating decompression requirements for the subsequent dive.
Efficient decompression requires the diver to ascend fast enough to establish as high a decompression gradient, in as many tissues, as safely possible, without provoking the development of symptomatic bubbles. This is facilitated by the highest acceptably safe oxygen partial pressure in the breathing gas, and avoiding gas changes that could cause counterdiffusion bubble formation or growth. The development of schedules that are both safe and efficient has been complicated by the large number of variables and uncertainties, including personal variation in response under varying environmental conditions and workload. (Full article...)
.svg?lang=en)
Slideshow of selected imagesGallery of selected images
-
Swim fin sole showing compliance with German standard DIN 7876:1980 (from Outline of underwater diving) -
Surface-supplied divers riding a stage to the underwater workplace -
GOST 20568:1975 compliant Russian and Ukrainian diving masks (from Outline of underwater diving) -
A range of 1970s snorkels made to British Standard BS 4532:1969 (from Outline of underwater diving)
Randomly selected quote
Diving is a wonderful hobby and it would be wrong for me to discourage it but divers need to be responsible to themselves and to others.
— Coroner Nigel Meadows, Inquest warning on diving courses
"Inquest warning on diving courses". BBC News, UK, England. 8 August 2006. Retrieved 1 July 2018.
Categories
Select [►] to view subcategories
Select [►] to view parent categories
Topic areas
| General |  | |
|---|---|---|
| Algorithms | ||
| Diving | ||
| Equipment | ||
| Gases | ||
| Injury and treatment | ||
| Procedures | ||
| ||
.jpg?lang=en)
| Injuries and disorders |
|  | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Treatments | ||||||||||||||
| Personnel | ||||||||||||||
| Screening | ||||||||||||||
| Researchers in diving medicine and physiology |
| |||||||||||||
| Diving medical research organisations |
| |||||||||||||
| ||||||||||||||
| Basic equipment | ,_is_fitted_with_a_Kirby_Morgan_37_Dive_Helmet.jpg?lang=en) | |
|---|---|---|
| Environmental protection | ||
| Underwater breathing apparatus | ||
| Helmets and masks | ||
| Decompression equipment | ||
| Safety equipment |
| |
| Instrumentation | ||
| Diver mobility equipment | ||
| Standards | ||
| ||
Diving safety, incidents, and law | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Diving safety |
|  | |||||||||||
| Incidents |
| ||||||||||||
| Legal aspects of diving |
| ||||||||||||
 Category: Underwater diving safety Category: Category:Underwater diving safety | |||||||||||||
| Breathing gas |
| |
|---|---|---|
| Platforms | ||
| Decompression systems | ||
| Remotely operated underwater vehicles |
| |
| Dive planning and recording equipment | ||
| Safety equipment | ||
| General | ||
| ||
| By country | |
|---|---|
| Competitions | |
| Finswimmers | |
| Records |
|
| Organisations |
|
| Equipment | |
| Related articles | |
| |
| Activities |  | |
|---|---|---|
| Competitions | ||
| Disciplines |
| |
| Equipment | ||
| Freedivers |
| |
| Hazards |
| |
| Historical | ||
| Organisations | ||
| Related | ||
| ||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Diving physics |
| ||||
|---|---|---|---|---|---|
| Diving physiology |
| ||||
| Diving environment |
| ||||
| Breathing gas | |
|---|---|
| Diving cylinders | |
| Diving regulators | |
| Helmets and masks | |
| Open-circuit scuba | |
| Rebreathers | |
| Surface-supplied | |
| Other related | |
| |
| Pioneers of diving | |||||
|---|---|---|---|---|---|
| Underwater scientists and archaeologists |
| ||||
| Scuba record holders | |||||
| Underwater filmmakers | |||||
| Underwater photographers |
| ||||
| Underwater explorers |
| ||||
| Related | |||||
| |||||
| |||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||
| Surface snorkeling | Finswimming (surface swimming & bi-fins) |  | |||
|---|---|---|---|---|---|
| Snorkeling/breath-hold | |||||
| Breath-hold | |||||
| Open Circuit Scuba | |||||
| Rebreather | |||||
| Sports governing organisations |
| ||||
| Related | |||||
| |||||
| Occupations |  | |
|---|---|---|
| Work type |
| |
| Tools & equipment | ||
| Underwater weapons |
| |
| Related | ||
| ||
Related projects
This portal is within the scope of WikiProject Underwater diving, a subject-area collaboration for underwater diving topics, and WikiProject Portals, a collaboration on portal design, development, and maintenance.
Task list
| ||
|---|---|---|
Technical
Biographical articles: (many of these are inductees of the International Scuba Diving Hall of Fame so there should be refs for notability
Women Divers Hall of Fame members. If any of these go blue, check and where appropriate add to membership list to WDHOF article. In date as of July 2022.
Researchers
Diving equipment manufacturers
Very low priority
|
Related portals
Wikimedia
The following Wikimedia Foundation sister projects provide more on this subject:
-
Commons
Free media repository -
Wikibooks
Free textbooks and manuals -
Wikidata
Free knowledge base -
Wikinews
Free-content news -
Wikiquote
Collection of quotations -
Wikisource
Free-content library -
Wikiversity
Free learning tools -
Wikivoyage
Free travel guide -
Wiktionary
Dictionary and thesaurus