Zum Inhalt springen

Prusa i3

aus Wikipedia, der freien Enzyklopädie
Dies ist eine alte Version dieser Seite, zuletzt bearbeitet am 8. Juli 2016 um 15:20 Uhr durch JorisvS (Diskussion | Beiträge) (→top). Sie kann sich erheblich von der aktuellen Version unterscheiden.

Vorlage:Infobox tool The Prusa i3 is an open-source fused deposition modeling 3D printer. Part of the RepRap project, it is the most used 3D printer in the world.[1][2] The Prusa i3 was designed by Josef Průša in 2012 with the Prusa i3 MK2 being released in 2016.[3] The Prusa i3's comparable low cost and ease of construction and modification has made it popular in education and with hobbyists and professionals.[4][5] Due to the printer being open source there have been many variants produced by companies and individuals worldwide, and like many other RepRap printers the Prusa i3 is capable of printing some of its own parts.[6]

History

The Prusa i3 is the third printer design by Josef Průša, a core developer of the RepRap project who had previously developed the PCB heated bed.[7] The first iteration was the Prusa Mendel[8] produced in 2010 followed by the Prusa Mendel (iteration 2), in 2011.[9] The printer was named Prusa Mendel by the RepRap community rather than Průša himself.[5]

Prusa Mendel

The first Prusa Mendel was released in September 2010 with the aim of simplifying the existing Mendel design, including reducing the time needed to create the 3D printed parts from 20 to 10 hours and 3D printable bushings replacing regular bearings.[5][8]

Prusa Mendel (iteration 2)

The second Prusa Mendel was released in November 2011 and with upgrades including snap fit parts, reduction of the number of tools needed to construct, maintain the printer and improved belts attached to the stepper motors and use of LM8UU linear bearings.[9]

Prusa i3

In May 2012[10] designs (produced in OpenSCAD) for the Prusa i3 were released, it was a major redesign from previous versions and other RepRap printers. The design replaced the triangular threaded rod frame construction with a water jet cut aluminum frame, had a food-safe hot end called the Prusa Nozzle, and used M5 threaded screws instead of M8.[11][12][13][14] The design focused on ease of construction and use rather than maximising the number of self replicated components.[15] In 2015 Průša released a version which he called the Original Prusa i3, selling through his company Prusa Research.[1]

Prusa i3 MK2

In May 2016 the Prusa i3 MK2 was released, which included a larger build volume, custom stepper motors with integrated lead screws, mesh bed levelling using a non-contact inductance sensor and a rewritten version of the Marlin firmware, polyetherimide print surface, Rambo controller board and an E3D V6 Full hotend.[3][16][17][18][19] The Prusa MK2 became the first RepRap printer to be supported by Windows Plug-and-Play USB ID.[20]

  • Prusa Mendel
    Prusa Mendel
  • Prusa Mendel (iteration 2)
    Prusa Mendel (iteration 2)
  • Prusa i3
    Prusa i3
  • Prusa i3 MK2
    Prusa i3 MK2

Recognition

In 2012 Josef received honours from the governor of the Vysočina Region in the Czech Republic for his accomplishments in technology.[21] In February 2014 he was featured on the cover of Czech Forbes magazine as one of the 30 under 30 list.[22]

Capabilities

Josef Průša inside a Prusa i3 MK2 printfarm, producing 3d printed parts

Self replication

Like many Reprap printers the Prusa i3 is capable of creating many of its own parts, which are usually printed in ABS plastic; the standard Prusa i3 has 26 printed parts.

Printable materials

Depending on the hot end and heated bed installed, the Prusa i3 is capable of printing many materials including Acrylonitrile butadiene styrene (ABS), polylactic acid (PLA), high impact polystyrene (HIPS), polypropylene and nylon.[23]

Components

The Prusa i3, like many Reprap printers, is made from a combination of self-replicated 3d printed parts and off-the-shelf components commonly referred to as "vitamins", as they cannot be produced by the printer itself.[24]

The vitamins used on the Prusa i3 are a combination of common components including threaded rods, smooth rods, screws, nuts, 5 NEMA 17 stepper motors and more specialist equipment including a controller board, heated bed and hot end.

  • Metal frame and constructed Y axis, printed parts in yellow
    Metal frame and constructed Y axis, printed parts in yellow
  • Assembled Y axis, printed parts in yellow
    Assembled Y axis, printed parts in yellow
  • Prusa i3 extruder and hot end with yellow printed parts
    Prusa i3 extruder and hot end with yellow printed parts
  • Completed Prusa i3, printed parts in yellow
    Completed Prusa i3, printed parts in yellow

Variants

The Prusa i3 is the most popular RepRap printer, because of this there are many variants of the Prusa i3 produced by different companies and individuals around the world including different styles of frame and extruders.[25]

Frames

The main variant in designs of the Prusa i3 are different frames used, these include single sheet frame cut from steel, acrylic, laser cut or CNC milled medium-density fibreboard box frames and Lego.[26][27][28][29]

Extruders

There are a range of different extruders used on variants of the Prusa i3 including 1.75mm and 3mm filament extruders and other tool heads including a MIG welder and a laser cutter.[30][31][32]

References

Vorlage:Reflist

Websites

Open source files

  1. ↑ a b What's up with Original Prusa i3? – Prusa Printers. In: Prusa Printers. 2. März 2016, abgerufen am 13. Juni 2016 (amerikanisches Englisch).
  2. ↑ 3D Printing Trends June 2016. In: 3D Hubs. Abgerufen am 29. Juni 2016.
  3. ↑ a b By: Prusa Shows Us the New i3 MK2 3D Printer and Where the Community is Headed. In: Hackaday. Abgerufen am 15. Juni 2016.
  4. ↑ David Ertischek: Prusa I3 is a DIY 3D printer you can actually afford. In: BGR. 3. Februar 2016, abgerufen am 12. Juni 2016.
  5. ↑ a b c The Story of RepRap Prusa Mendel – MakingSociety. In: MakingSociety. 15. Januar 2014, abgerufen am 16. Juni 2016 (amerikanisches Englisch).
  6. ↑ 3D Hubs
  7. ↑ Thingiverse.com: PCB heated print bed by josefprusa. In: www.thingiverse.com. Abgerufen am 19. Juni 2016.
  8. ↑ a b first commit · josefprusa/PrusaMendel@6ed4480. In: GitHub. Abgerufen am 13. Juni 2016.
  9. ↑ a b Hobbyist Weekend – With Prusa Mendel 3D Printer. In: 3D Printing Industry. Abgerufen am 15. Juni 2016.
  10. ↑ initial commit · josefprusa/Prusa3@d3618a6. In: GitHub. Abgerufen am 13. Juni 2016.
  11. ↑ By: ImplicitCAD: Programmatic CAD Built with 3D Printing in Mind. In: Hackaday. Abgerufen am 15. Juni 2016.
  12. ↑ By: Interview With A Printer. In: Hackaday. Abgerufen am 17. Juni 2016.
  13. ↑ Prusa Nozzle: All metal food safe RepRap hot-end. In: 3ders.org. Abgerufen am 19. Juni 2016 (amerikanisches Englisch).
  14. ↑ By: Fail Of The Week: My 3D Printer Upgrade. In: Hackaday. Abgerufen am 15. Juni 2016.
  15. ↑ Open Source 3D printing: an Interview with Josef Prusa. In: Open Electronics. Abgerufen am 16. Juni 2016 (amerikanisches Englisch).
  16. ↑ Josef Prusa unveils $699 Original Prusa i3 MK2 3D printer. In: 3ders.org. Abgerufen am 13. Juni 2016 (amerikanisches Englisch).
  17. ↑ Josef Prusa unveils $699 Original Prusa i3 MK2 3D printer. In: 3ders.org. Abgerufen am 19. Juni 2016 (amerikanisches Englisch).
  18. ↑ The All New Original Prusa i3 MK2 Kit Has a Ton of New Features. In: 3DPrint.com. 18. Mai 2016, abgerufen am 19. Juni 2016 (amerikanisches Englisch).
  19. ↑ Interview with Josef Prusa, CEO and Founder of Prusa Research. In: 3D Printing Industry. Abgerufen am 12. Juni 2016.
  20. ↑ Microsoft adds network 3D printing support with Windows 10 IoT Core app for Raspberry Pi 3. In: 3ders.org. Abgerufen am 12. Juni 2016 (amerikanisches Englisch).
  21. ↑ Jihlavské listy | Aktuality | Noviny Kraje Vysočina. In: www.jihlavske-listy.cz. Abgerufen am 13. Juni 2016.
  22. ↑ Forbes Česko. In: www.facebook.com. Abgerufen am 13. Juni 2016.
  23. ↑ Material guides – Prusa3D – 3D Printers from Josef Průša. In: Prusa3D – 3D Printers from Josef Průša. Abgerufen am 19. Juni 2016 (amerikanisches Englisch).
  24. ↑ Distributing 3DP Parts — and Vitamins — With Passion. In: 3D Printing Industry. Abgerufen am 15. Juni 2016.
  25. ↑ By: [Prusa] interviews a whole bunch of RepRappers. In: Hackaday. Abgerufen am 17. Juni 2016.
  26. ↑ Portugal's Reprapalgarve Team Shows Us How to Make a Steel Framed Color 3D Printer for Around $600. In: 3DPrint.com. 6. Juni 2016, abgerufen am 15. Juni 2016 (amerikanisches Englisch).
  27. ↑ RepRap iTopie Emerges as Improvement on Prusa i3. In: 3DPrint.com. 18. Dezember 2014, abgerufen am 15. Juni 2016 (amerikanisches Englisch).
  28. ↑ By: Lego Printer Prints Lego. In: Hackaday. Abgerufen am 19. Juni 2016.
  29. ↑ Build your very own Prusa l3 LEGO 3D printer using (almost) nothing but LEGO bricks. In: 3ders.org. Abgerufen am 19. Juni 2016 (amerikanisches Englisch).
  30. ↑ Dutch students build DIY metal 3D printer using Prusa i3 printer and a MIG welder. In: 3ders.org. Abgerufen am 19. Juni 2016 (amerikanisches Englisch).
  31. ↑ Students Combine Prusa i3 Printer with a MIG Welder to Create an Affordable Metal 3D Printer. In: 3DPrint.com. 17. November 2014, abgerufen am 19. Juni 2016 (amerikanisches Englisch).
  32. ↑ DIY 3D Printing: Laser cutting with Prusa Mendel i2. In: diy3dprinting.blogspot.co.uk. Abgerufen am 19. Juni 2016.
Abgerufen von „https://de.wikipedia.org/w/index.php?title=Prusa_i3&oldid=156297151“