Jump to content

User:Prunk/Utilite

From Wikipedia, the free encyclopedia
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Specifications

Utilite Value Utilite Standard Utilite Pro Utilite2 4GB Utilite2 SSD Extra zbriši
Target price: US$ 99 US$ 159 US$ 219 US$ 192 US$ 229
SoC: Broadcom BCM2835 (CPU, GPU, DSP, SDRAM, and single USB port)[1][2] Broadcom BCM2836 (CPU, GPU, DSP, SDRAM, and single USB port) Broadcom BCM2835 (CPU, GPU, DSP, SDRAM, and single USB port)[1][2]
CPU: 1 GHz Freescale i.MX6 single-core ARM Cortex-A9 1 Ghz Freescale i.MX6 dual-core ARM Cortex-A9 1.2 Ghz Freescale i.MX6 quad-core ARM Cortex-A9 1.7 Ghz Qualcomm Snapdragon 600 (APQ8064) quad-core
GPU: Broadcom VideoCore IV @ 250 MHz[3][4]
OpenGL ES 2.0 (24 GFLOPS)
MPEG-2 and VC-1 (with license),[5] 1080p30 h.264/MPEG-4 AVC high-profile decoder and encoder[1]
Memory (DDR3-1066): 512 MB 2 GB
USB 2.0 ports:[6] 1 (direct from BCM2835 chip) 2 (via the on-board 3-port USB hub)[7] 4 (via the on-board 5-port USB hub)[8][9] 1 (direct from BCM2835 chip)
Video input: 15-pin MIPI camera interface (CSI) connector, used with the Raspberry Pi camera or Raspberry Pi NoIR camera[10] 2× MIPI camera interface (CSI)[2][11][12]
Video outputs: HDMI (rev 1.3 & 1.4),[13] 14 HDMI resolutions from 640×350 to 1920×1200 plus various PAL and NTSC standards,[14] composite video (PAL and NTSC) via RCA jack HDMI (rev 1.3 & 1.4), 14 HDMI resolutions from 640×350 to 1920×1200 plus various PAL and NTSC standards, composite video (PAL and NTSC) via 3.5 mm TRRS jack shared with audio out HDMI (rev 1.3 & 1.4), 14 HDMI resolutions from 640×350 to 1920×1200 plus various PAL and NTSC standards, composite video (PAL and NTSC) via RCA jack HDMI (rev 1.3 & 1.4), 14 HDMI resolutions from 640×350 to 1920×1200 plus various PAL and NTSC standards, composite video (PAL and NTSC) via 3.5 mm TRRS jack shared with audio out HDMI, 2× MIPI display interface (DSI),[2][12] MIPI display interface (DSI) for raw LCD panels,[15][16] composite video[11][17]
Audio inputs: As of revision 2 boards, I²S[18]
Audio outputs: Analog via 3.5 mm phone jack; digital via HDMI and, as of revision 2 boards, I²S Analog, HDMI, I²S
Onboard storage:[6] SD / MMC / SDIO card slot (3.3 V with card power only) MicroSD[8] SD / MMC / SDIO card slot MicroSD 4-GB eMMC flash memory chip;[2] may or may not support external SD cards with configuration changes
Onboard network:[6] None 10/100 Mbit/s Ethernet (8P8C) USB adapter on the third/fifth port of the USB hub (SMSC lan9514-jzx)[7] None
Low-level peripherals: 8× GPIO,[19] plus the following, which can also be used as GPIO: UART, I²C bus, SPI bus with two chip selects, I²S audio[20] +3.3 V, +5 V, ground[3][21]
 17× GPIO plus the same specific functions, and HAT ID bus 8× GPIO, plus the following, which can also be used as GPIO: UART, I²C bus, SPI bus with two chip selects, I²S audio +3.3 V, +5 V, ground.

An additional 4× GPIO are available on the P5 pad if the user is willing to make solder connections

 17× GPIO plus the same specific functions, and HAT ID bus 46× GPIO, some of which can be used for specific functions including I²C, SPI, UART, PCM, PWM[22]
Power ratings: 300 mA (1.5 W)[23] 200 mA (1 W)[24] 700 mA (3.5 W) 600 mA (3.0 W)[8] similar to Model A+
Power source: 5 V via MicroUSB or GPIO header 5 V
Size: 85.60 mm × 56.5 mm (3.370 in × 2.224 in) – not including protruding connectors 65 mm × 56.5 mm (2.56 in × 2.22 in) – (same as HAT board) and 10 mm high 85.60 mm × 56.5 mm (3.370 in × 2.224 in) – not including protruding connectors 67.6 mm × 30 mm (2.66 in × 1.18 in)
Weight: 45 g (1.6 oz) 23 g (0.81 oz) 45 g (1.6 oz) 7 g (0.25 oz)[25]
  1. ^ a b c "BCM2835 Media Processor; Broadcom". Broadcom.com. 1 September 2011. Retrieved 6 May 2012.
  2. ^ a b c d e Cite error: The named reference CM-Announcement was invoked but never defined (see the help page).
  3. ^ a b "Q&A with our hardware team". Raspberry Pi Foundation. Retrieved 20 September 2011.
  4. ^ Halfacree, Gareth. "Raspberry Pi - The Model B". bit-tech.net. Dennis Publishing Limited. Retrieved 10 June 2013.
  5. ^ Cite error: The named reference rpi-codec was invoked but never defined (see the help page).
  6. ^ a b c "Verified USB Peripherals and SDHC Cards;". Elinux.org. Retrieved 6 May 2012.
  7. ^ a b "SMSC LAN9512 Website;". Smsc.com. Retrieved 6 May 2012.
  8. ^ a b c Cite error: The named reference B-Plus-Announcement was invoked but never defined (see the help page).
  9. ^ "Microchip/SMSC LAN9514 data sheet;" (PDF). Microchip. Retrieved 15 July 2014.
  10. ^ "diagram of Raspberry Pi with CSI camera connector". Elinux.org. 2 March 2012. Retrieved 22 June 2012.
  11. ^ a b Adams, James (3 April 2014). "Raspberry Pi Compute Module electrical schematic diagram" (PDF). Raspberry Pi Foundation. Retrieved 22 September 2014.
  12. ^ a b Adams, James (3 April 2014). "Raspberry Pi Compute Module IO Board elecrical schematic diagram" (PDF). Raspberry Pi Foundation. Retrieved 22 September 2014.
  13. ^ "Embedded Linux Wiki: Hardware Basic Setup". Elinux.org. Retrieved 25 May 2013.
  14. ^ "Raspberry Pi, supported video resolutions". eLinux.org. 30 November 2012. Retrieved 11 December 2012.
  15. ^ "Raspberry Pi Wiki, section screens". Elinux.org. Retrieved 6 May 2012.
  16. ^ "diagram of Raspberry Pi with DSI LCD connector". Elinux.org. Retrieved 6 May 2012.
  17. ^ Adams, James (7 April 2014). "Comment by James Adams on Compute Module announcement". Raspberry Pi Foundation. Retrieved 22 September 2014.
  18. ^ "I2S driver development thread". Retrieved 16 September 2014.
  19. ^ More GPIOs can be used if you do not use the low level peripherals
  20. ^ Since the release of the revision 2 model
  21. ^ "Raspberry Pi GPIO Connector;". Elinux.org. Retrieved 6 May 2012.
  22. ^ Adams, James (7 April 2014). "Comment by James Adams on Compute Module announcement". Raspberry Pi Foundation. Retrieved 22 September 2014.
  23. ^ "Power supply confirmed as 5V micro USB". Raspberrypi.org. Retrieved 25 July 2012.
  24. ^ http://www.raspi.today/raspberry-pi-model-a-plus-out-now/
  25. ^ Adams, James (7 April 2014). "Comment by James Adams on Compute Module announcement". Raspberry Pi Foundation. Retrieved 22 September 2014.
Retrieved from "https://en.wikipedia.org/w/index.php?title=User:Prunk/Utilite&oldid=645448169"