Jump to content

Feature-oriented positioning

From Wikipedia, the free encyclopedia
This is an old revision of this page, as edited by Rostislav V. Lapshin (talk | contribs) at 21:28, 14 December 2018 (←Removed redirect to Feature-oriented scanning). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.


Feature-oriented positioning (FOP) is a method of precise movement of the scanning microscope probe across the surface under investigation. With this method, surface features (objects) are used as reference points. During OOP, the probe moves from the start surface point A (neighborhood of the start feature) to the destination point B (neighborhood of the destination feature) along some route that goes through intermediate features of the surface. The method may also be referred to by another name — object-oriented positioning (OOP).

To be distinguished are a “blind” FOP when the coordinates of features used for probe movement are unknown in advance and FOP by existing feature “map” when the relative coordinates of all features are known, for example, in case they were obtained during preliminary feature-oriented scanning (FOS). Probe movement by a navigation structure is a combination of the above-pointed methods.

FOP method may be used in bottom-up nanofabrication to implement high-precision movement of the nanolithograph/nanoassembler probe along the substrate surface. Moreover, once made along some route, FOP may be then exactly repeated the required number of times. After movement in the specified position, an influence on the surface or manipulation of a surface object (nanoparticle, molecule, atom) is performed. All the operations are carried out in automatic mode. Possessing a coarse walking-type positioner, the OOP method provides precise movement of the probe over the surface to an unlimited distance. With multiprobe instruments, FOP approach allows the application of any number of specialized technological and/or analytical probes successively to a surface feature/object or to a specified point of the feature/object neighborhood. That opens a prospect for building a complex nanofabrication consisting of a large number of technological, measuring, and checking operations.

See also

References

1. R. V. Lapshin (2004). "Feature-oriented scanning methodology for probe microscopy and nanotechnology" (PDF). Nanotechnology. 15 (9). UK: IOP: 1135–1151. doi:10.1088/0957-4484/15/9/006. ISSN 0957-4484.

2. R. V. Lapshin (2011). "Feature-oriented scanning probe microscopy". In H. S. Nalwa (ed.). Encyclopedia of Nanoscience and Nanotechnology. Vol. 14. USA: American Scientific Publishers. pp. 105–115. ISBN 1-58883-163-9. {{cite book}}: |format= requires |url= (help); External link in |chapterurl= (help); Unknown parameter |chapterurl= ignored (|chapter-url= suggested) (help)

3. R. Lapshin (2014). "Feature-oriented scanning probe microscopy: precision measurements, nanometrology, bottom-up nanotechnologies". Electronics: Science, Technology, Business (Special issue “50 years of the Institute of Physical Problems”). Russian Federation: Technosphera Publishers: 94–106. ISSN 1992-4178. (in Russian).

4. D. W. Pohl, R. Möller (1988). ""Tracking" tunneling microscopy". Review of Scientific Instruments. 59 (6). USA: AIP Publishing: 840–842. doi:10.1063/1.1139790. ISSN 0034-6748.

5. B. S. Swartzentruber (1996). "Direct measurement of surface diffusion using atom-tracking scanning tunneling microscopy" (PDF). Physical Review Letters. 76 (3). USA: American Physical Society: 459–462. doi:10.1103/PhysRevLett.76.459. ISSN 0031-9007.

Retrieved from "https://en.wikipedia.org/w/index.php?title=Feature-oriented_positioning&oldid=873753960"