Password Authentication Protocol

Password Authentication Protocol (PAP) is a password-based authentication protocol used by Point to Point Protocol (PPP) to validate users. Almost all network operating system remote servers support PAP. PAP is specified in RFC 1334.

PAP is considered a weak authentication scheme (weak schemes are simple and have lighter computational overhead but are much more vulnerable to attack; while weak schemes may have limited application in some constrained environments, they are avoided in general). Among PAP's deficiencies is the fact that it transmits unencrypted passwords over the network. PAP is therefore used only as a last resort when the remote server does not support a stronger scheme such as CHAP or EAP.

Working cycle

• Client sends username and password
• Server sends authentication-ack (if credentials are OK) or authentication-nak (otherwise)

PAP Packets

Description	1 byte	1 byte	2 bytes	1 byte	Variable	1 byte	Variable
Authentication-request	Code = 1	ID	Length	Username length	Username	Password length	Password
Authentication-ack	Code = 2	ID	Length	Message length	Message
Authentication-nak	Code = 3	ID	Length	Message length	Message

PAP packet embedded in a PPP frame. The protocol field has a value of C023 (hex).

Flag	Address	Control	Protocol (C023 (hex))	Payload (table above)	FCS	Flag

See also

• SAP - Service Access Point

References

• Lloyd, Brian; Simpson, William Allen (1992). "Password Authentication Protocol". PPP Authentication Protocols. IETF. p. 2. doi:10.17487/RFC1334. RFC 1334. Retrieved 16 July 2015. {{citation}}: Unknown parameter |month= ignored (help)