Mars Excursion Module

Artist's conception of the Mars Excursion Module (MEM) proposed in a NASA study in 1964.

The Mars Excursion Module (MEM) was a spacecraft proposed by NASA in the 1960s for use in a manned mission to Mars. It formed part of Mars orbit rendezvous (MOR) and flyby-rendezvous mission profiles studied at NASA's Manned Spacecraft Center in the 1960s. A Mars Excursion Module would have been a combination of a Mars lander, short-stay surface habitat, and ascent vehicle; the ascent stage performed the rendezvous. One design for a MEM would have been used for a 40-day stay on the Martian surface in the flyby-rendezvous mission profile or for a 10- to 40-day stay in the MOR profiles. There was also a descent only unmanned MEM for delerving cargo, like a rover to the surface of Mars. Another MEM cargo lander variant would deliver a nuclear reactor to support the surface operations, and there was another with a communications, living quarters and lab in one landing-only MEM unit.

In the early 1960s, NASA contracted Philco Corporation to design a Mars Excursion Module for a Mars mission for the early 1970s. The basic requirements were for a crew of two, 1 US ton of science hardware, and to support 40 days of surface operation on Mars. Another MEM from this period was the Ames contracted TRW MEM, a design which weighed 11.4 metric tons but was designed for Mars atmosphere which had 10% of Earth's. The TRW MEM would support 10 days on the surface.

In 1964, Philco Aeronutronic proposed a lifting body MEM, approximately 30 feet (9.1 m) long and 33 feet (10 m) wide at the tail, which would carry three astronauts. The hull would have consisted of columbium and nickel alloy. The MEM's descent stage would have served as the launch pad for liftoff of the ascent stage, as with the Apollo Lunar Module.

A Mars Excursion Module was discussed as a possibility in the Space Task Group Report of 1969, with a development decision required in FY 1974 for a 1981 Mars mission or in FY 1978 for a 1986 mission.

The watershed moment for mission planning was July 1965, when Mariner IV returned more accurate atmospheric data about Mars. This ruled out many of the lifting body and glider designs that were being considered based on estimates of a thicker Mars atmosphere then revealed by Mariner IV.

• Philco Aeronutronic Mars Excursion Module, this had a lifting body and had to be re-evaluated when the new data came in.
• Marshall Space Flight Center MEM by Woodcock after Mariner IV data, had a more Apollo-like "gumdrop" style design.

Gordon Woodcock at the NASA Marshal Space Flight Center worked on the basis of a thinner Mars atmosphere (0.5 percent of Earth's), and developed design for a MEM, and also a pure-lander variant that would deliver a pressurized manned Mars rover called Molab.

See also

• Mars habitat
• Lander (spacecraft)
• Mars suit
• Manned Mars rover

External links

• AN INITIAL CONCEPT OF A MANNED MARS EXCURSION VEHICLE FOR A TENOUS MARS ATMOSPHERE (1966)