Jump to content

Localized surface plasmon

From Wikipedia, the free encyclopedia
This is an old revision of this page, as edited by 129.22.1.18 (talk) at 03:28, 15 December 2017 (I added more applications for localized surface plasmon and the main challenges facing utilizing it in high effeciency applications). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

A localized surface plasmon (LSP) is the result of the confinement of a surface plasmon in a nanoparticle of size comparable to or smaller than the wavelength of light used to excite the plasmon. The LSP has two important effects: electric fields near the particle’s surface are greatly enhanced and the particle’s optical absorption has a maximum at the plasmon resonant frequency. The enhancement falls off quickly with distance from the surface and, for noble metal nanoparticles, the resonance occurs at visible wavelengths.[1] For semiconductor nanoparticles, the maximum optical absorption is often in the near-infrared and mid-infrared region.[2][3]

Applications

The plasmon resonant frequency is highly sensitive to the refractive index of the environment; a change in refractive index results in a shift in the resonant frequency. As the resonant frequency is easy to measure, this allows LSP nanoparticles to be used for nanoscale sensing applications.[4] Nanostructures exhibiting LSP resonances are used to enhance signals in modern analytical techniques based on spectroscopy. Other applications that rely on effecient light to heat generation in the nanoscale are heat-assisted magnetic recording (HAMR) , photothermal cancer therapy, and thermophotovoltaics. [5] So far, high effeciency applications using plasmonics have not been realized due to the high ohmic losses inside metals especially in the optical spectral range (visible and NIR). [6],[7]

See also

References

  1. ^ Rycenga, Matthew; Cobley, Claire M.; Zeng, Jie; Li, Weiyang; Moran, Christine H.; Zhang, Qiang; Qin, Dong; Xia, Younan (2011). "Controlling the Synthesis and Assembly of Silver Nanostructures for Plasmonic Applications". Chem. Rev. 111: 3669–3712. doi:10.1021/cr100275d.
  2. ^ Liu, Xin; Swihart, Mark T. (2014). "Heavily-doped colloidal semiconductor and metal oxide nanocrystals: an emerging new class of plasmonic nanomaterials". Chem. Soc. Rev. 43: 3908–3920. doi:10.1039/c3cs60417a.
  3. ^ Zhou, Shu; Pi, Xiaodong; Ni, Zhenyi; Ding, Yi; Jiang, Yingying; Jin, Chuanhong; Delerue, Christophe; Yang, Deren; Nozaki, Tomohiro (2015). "Comparative study on the localized surface plasmon resonance of boron- and phosphorus-doped silicon nanocrystals". ACS Nano. 9: 378–386. doi:10.1021/nn505416r.
  4. ^ Mayer, Kathryn M.; Hafner, Jason H. (2011). "Localized Surface Plasmon Resonance Sensors". Chemical Reviews. Plasmonics (111): 3828–3857. doi:10.1021/cr100313v.
  5. ^ ElKabbash, Mohamed; et al. (2017). "Tunable Black Gold: Controlling the Near-Field Coupling of Immobilized Au Nanoparticles Embedded in Mesoporous Silica Capsules". Advanced Optical Materials. 5: 1700617 – via Wiely. {{cite journal}}: Explicit use of et al. in: |first= (help)
  6. ^ Khurgin, Jacob (2015). "How to deal with the loss in plasmonics and metamaterials". Nature Nanotechnology. 10: 2–6.
  7. ^ ElKabbash, Mohamed; et al. (2017). "Ultrafast transient optical loss dynamics in exciton–plasmon nano-assemblies". Nanoscale. 9: 6558–6566. {{cite journal}}: Explicit use of et al. in: |first= (help)