Jump to content

Textile stabilization

From Wikipedia, the free encyclopedia
This is an old revision of this page, as edited by KBish87 (talk | contribs) at 16:14, 15 April 2016. The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Textile Stabilization

Definition/Summary

A conservation method used to stabilize weak points in textile pieces and prevent further degredation or damage to the fabric. 
== Methods ==

Localized and Overall Support

Used to provide support for the garment by stabilizing weak sections or by creating a backing or lining for the piece.

Fabric Properties

  • Should not cause damage through friction with the original fabric
  • Be of similar or lighter weight than the original fabric.
  • Match the original fabric with consideration of the loss of color or sheen
  • Be of a tight enough weave to exclude dust if being used as a barrier
=== Overlay ===

Translucent or sheer fabrics are used to stabilize the textile without altering its appearance. This is typically done using nylon netting, silk crepeline, or polyester Tetex.

Materials and techniques

Conservation Stitching[1]

  • Whip Stitch
  • Running Stitch
  • Back Stitch
  • Herringbone Stitch
  • Laid Couching

Nylon Netting

Textile Conservators may use either heat set or bobbinet netting, both of which do not fray but are susceptible to degradation and reactions from light.

Heat Set

  • Available in a variety of colors
  • Some varieties very stiff

= Bobbinet

  • Available in fewer colors, but is easily dyed
  • Has a better drape than heat set netting or Tetex

Silk Crepeline

Silk is less sheer than nylon netting and is also susceptible to reactions to light, but may be used as an overlay technique as well as for patching specific areas and can be easily dyed. Because it can fray, the edges need to be hemmed, which can create less sheer areas.

Polyester Tetex

approved adhesives

  1. ^ "Conservation Stitching Guide" (PDF). Museum Textile Services.