Box and Block Test
 | This article, Box and Block Test, has recently been created via the Articles for creation process. Please check to see if the reviewer has accidentally left this template after accepting the draft and take appropriate action as necessary.
Reviewer tools: Inform author |
The Box and Blocks Test (BBT) is a functional test used in upper limb rehabilitation. The test is used to measure the gross manual dexterity of a patient, or of a person using an upper limb prosthetic device.
The test consists of a box with a partition in the middle. Blocks are placed at one side of the partition. The box is placed at a table. The test subject is seated, facing towards the box. During the tests the test subject is given 60 seconds to move as many blocks as possible from one side to the other, by using only his tested hand. The tested hand can be either the subjects own hand or a prosthetic device operated by the subject. The number of displaced blocks is a measure of the gross manual dexterity. The outcome can be compared to reference values of healthy test subjects [1], or reference values of tests performed with a prosthesis [2]. The Box and Blocks Test enable measuring progress of gross hand dexterity during rehabilitation.
References
- ^ Mathiowetz, Virgil; Volland, Gloria; Kashman, Nancy; Weber, Karen (1985). "Adult norms for the Box and Block Test of manual dexterity". Am J Occup Ther. 39: 386–391. PMID 3160243.
- ^ Haverkate, Liz; Smit, Gerwin; Plettenburg, Dick H. "Assessment of body-powered upper limb prostheses by able-bodied subjects, using the Box and Blocks Test and the Nine-Hole Peg Test". Prosthetics and Orthotics International. doi:10.1177/0309364614554030. PMID 25336050.
| This article, Box and Block Test, has recently been created via the Articles for creation process. Please check to see if the reviewer has accidentally left this template after accepting the draft and take appropriate action as necessary.
Reviewer tools: Inform author |