Insulation monitoring device
An insulation monitoring device monitors the ungrounded system between an active phase conductor and earth. It is intended to give an alert (light and sound) or disconnect the power supply when the resistance between the two conductors drops below a set value, usually 50 kΩ (sample of IEC standard for medical applications). The main advantage is that the ungrounded or floating system allows a continuous operation of important consumers such as medical, chemical, military and etc. Even if there is a failure (i.e., phase touches ground) there is still no danger to the personnel and to the application.[citation needed]
Some manufacturers of monitors for these systems are capable of handling VFDs (Variable Frequency (Speed) Drives). Most, however are not due to issues with the DC-portions of the VFDs.
Most monitors work by injecting low level dc on the line and detecting. Some manufacturers use a patented AMP-monitoring principle (Adapted Measuring Pulse)[citation needed]
Further reading
- by BENDER CANADA 2012 -Electrical Safety on Ships, Offshore and Onshore
- Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 8: Insulation monitoring devices for IT systems
- The IT earthing system (unearthed neutral) in LV
External links
 | This electronics-related article is a stub. You can help Wikipedia by expanding it. |