Jump to content

Cruise control

From Wikipedia, the free encyclopedia
This is an old revision of this page, as edited by Cellurl (talk | contribs) at 17:00, 12 November 2014 (→Adaptive cruise control). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.
For the software build framework, see CruiseControl.
Cruise control mounted on a 2000 Jeep Grand Cherokee Steering Wheel

Cruise control (sometimes known as speed control or autocruise, or tempomat in some countries) is a system that automatically controls the speed of a motor vehicle. The system takes over the throttle of the car to maintain a steady speed as set by the driver.

History

Speed control with a centrifugal governor was used in automobiles as early as 1900 in the Wilson-Pilcher and also in the 1910s by Peerless. Peerless advertised that their system would "maintain speed whether up hill or down". The technology was adopted by James Watt and Matthew Boulton in 1788 to control steam engines, but the use of governors dates at least back to the 17th century. On an engine the governor adjusts the throttle position as the speed of the engine changes with different loads, so as to maintain a near constant speed.

Modern cruise control (also known as a speedostat) was invented in 1948 by the inventor and mechanical engineer Ralph Teetor.[1] His idea was born out of the frustration of riding in a car driven by his lawyer, who kept speeding up and slowing down as he talked. The first car with Teetor's system was the 1958 Imperial (called "Auto-pilot").[2] This system calculated ground speed based on driveshaft rotations and used a solenoid to vary throttle position as needed.

A 1955 U.S. Patent for a "Constant Speed Regulator" was filed in 1950 by M-Sgt Frank J. Riley.[3] He installed his invention, which he conceived while driving on the Pennsylvania Turnpike, on his own car in 1948.[4] Despite this patent, the inventor, Riley, and the subsequent patent holders were not able to collect royalties for any of the inventions using cruise control.

Following the 1973 oil crisis and rising fuel prices, the device became more popular in the U.S.[5] "Cruise control can save gas by avoiding surges that expel fuel" while driving at steady speeds.[5] In 1974, AMC, GM, and Chrysler priced the option at $60 to $70, while Ford charged $103.[5]

The driver must bring the vehicle up to speed manually and use a button to set the cruise control to the current speed. The cruise control takes its speed signal from a rotating driveshaft, speedometer cable, wheel speed sensor from the engine's RPM, or from internal speed pulses produced electronically by the vehicle. Most systems do not allow the use of the cruise control below a certain speed (normally around 40 km/h (25 mph)). The vehicle will maintain the desired speed by pulling the throttle cable with a solenoid, a vacuum driven servomechanism, or by using the electronic systems built into the vehicle (fully electronic) if it uses a 'drive-by-wire' system.

All cruise control systems must be capable of being turned off both explicitly and automatically when the driver depresses the brake, and often also the clutch. Cruise control often includes a memory feature to resume the set speed after braking, and a coast feature to reduce the set speed without braking. When the cruise control is engaged, the throttle can still be used to accelerate the car, but once the pedal is released the car will then slow down until it reaches the previously set speed.

On the latest vehicles fitted with electronic throttle control, cruise control can be easily integrated into the vehicle's engine management system. Modern "adaptive" systems (see below) include the ability to automatically reduce speed when the distance to a car in front, or the speed limit, decreases. This is an advantage for those driving in unfamiliar areas.

The cruise control systems of some vehicles incorporate a "speed limiter" function, which will not allow the vehicle to accelerate beyond a pre-set maximum; this can usually be overridden by fully depressing the accelerator pedal. (Most systems will prevent the vehicle accelerating beyond the chosen speed, but will not apply the brakes in the event of overspeeding downhill.)

On vehicles with a manual transmission, cruise control is less flexible because the act of depressing the clutch pedal and shifting gears usually disengages the cruise control. The "resume" feature has to be used each time after selecting the new gear and releasing the clutch. Therefore cruise control is of most benefit at motorway/highway speeds when top gear is used virtually all the time.

Electronic Cruise Control

Daniel Aaron Wisner invented Automotive Electronic Cruise Control in 1968 as an engineer for RCA's Industrial and Automation Systems Division in Plymouth, Michigan. His invention described in two patents filed that year (#3570622 & #3511329), with the second modifying his original design by debuting digital memory, was the first electronic gadgetry to play a role in controlling a car and ushered in the computer-controlled era in the automobile industry. Two decades passed before an integrated circuit for his design was developed by Motorola Inc. as the MC14460 Auto Speed Control Processor in CMOS. As a result, cruise control was eventually adopted by automobile manufacturers as standard equipment and nearly every car built and many trucks are fitted with a configuration of the circuitry and hardware nearly identical to his prototype.[citation needed] The advantage of electronic speed control over its mechanical predecessor, which was featured on luxury models but never gained wide acceptance, was that it could be easily integrated with electronic accident avoidance and engine management systems.

Advantages and disadvantages

Some of those advantages include:

  • Its usefulness for long drives (reducing driver fatigue, improving comfort by allowing positioning changes more safely) across highways and sparsely populated roads. This usually results in better fuel efficiency.[citation needed]
  • Some drivers use it to avoid subconsciously violating speed limits. A driver who otherwise tends to subconsciously increase speed over the course of a highway journey may avoid a speeding ticket. Such drivers should note, however, that a cruise control may go over its setting on a downhill which is steep enough to accelerate with an idling engine.

However, cruise control can also lead to accidents due to several factors, such as:

  • The lack of need to maintain constant pedal pressure, which can help lead to accidents caused by highway hypnosis or incapacitated drivers; future systems may include a dead man's switch to avoid this.[citation needed]
  • When used during inclement weather or while driving on wet or snow- and/or ice-covered roads, the vehicle could go into a skid (although this may be somewhat mitigated by cars equipped with Electronic Stability Control). Stepping on the brake—such as to disengage the cruise control—could result in the driver losing control of the vehicle.[citation needed]

Driving over "rolling" terrain, with gentle up and down portions, can usually be done more economically (using less fuel) by a skilled driver viewing the approaching terrain, by maintaining a relatively constant throttle position and allowing the vehicle to accelerate on the downgrades and decelerate on upgrades, while reducing power when cresting a rise and adding a bit before an upgrade is reached. Cruise control will tend to overthrottle on the upgrades and retard on the downgrades, wasting the energy storage capabilities available from the inertia of the vehicle. The inefficiencies from cruise control can be even greater relative to skilled driving in hybrid vehicles.[citation needed]

Adaptive cruise control

Main article: Adaptive cruise control

Some modern vehicles have adaptive cruise control (ACC) systems, which is a general term meaning improved cruise control. These improvements can be automatic braking or dynamic set-speed type controls.

Automatic Braking Type: The automatic braking type use either a radar or laser setup to allow the vehicle to keep pace with the car it is following, slow when closing in on the vehicle in front and accelerating again to the preset speed when traffic allows. Some systems also feature forward collision warning systems, which warns the driver if a vehicle in front—given the speed of both vehicles—gets too close (within the preset headway or braking distance).

Dynamic Set Speed Type: The dynamic set speed uses the GPS position of speed limit signs, from a database. Some are modifiable by the driver. At least one, Wikispeedia, incorporates crowdsourcing, so driver input is shared, improving the database for all users.

Non Braking Type: The speed can be adjusted to allow traffic calming. One visual method uses OpenCV[6].

References

  1. ^ Speed control device for resisting operation of the accelerator. Ralph R. Teetor. US-Patent 2519859 A
  2. ^ "1958 Chrysler Auto Pilot (brochure)". oldcarbrochures.com. p. 1. Retrieved 8 September 2012.
  3. ^ United States Patent US2714880
  4. ^ The Keesler News. Nov 4, 1948
  5. ^ a b c "Big capacity increase". Ward's Auto World. 10: 95. 1974. Retrieved 8 September 2012.
  6. ^ "Speederaser". {{cite web}}: |access-date= requires |url= (help); |archive-url= requires |archive-date= (help); Missing or empty |url= (help); Text "http://www.wikispeedia.org/wordpress/nirvana-cruise-control/" ignored (help)
Wikimedia Commons has media related to Cruise control.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Cruise_control&oldid=633545567"