Jump to content

Attached Support Processor

Add links
From Wikipedia, the free encyclopedia
This is an old revision of this page, as edited by Peter Flass (talk | contribs) at 15:03, 7 January 2014 (wl 360/40). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Attached Support Processor (ASP) is an I/O subsystem of OS/360."[1]

ASP evolved from the design of the 7094/7044 Direct Coupled System, using data channel to data channel communication. By attaching an IBM 7044 as a peripheral processor throughput was more than doubled.

ASP was introduced in March 1967, and initially allowed connection of two System/360 computers via a channel-to-channel adapter (CTCA).[2]

In a typical ASP configuration a small mainframe such as a IBM System/360 Model 40 (the support or global system) controlled one or more 360/65 or larger processors (main or local systems). The computers were connected through selector channels on each host attached to channel-to-channel adapters, for an early form of short distance, point-to-point computer networking.

With the introduction of System/370 ASP was renamed Job Entry Subsystem 3 (JES3) and is still in use as of 2014.

References

  1. ^ "Representative ASP Installation". Computerworld. September 13, 1967. Retrieved February 7, 2013.
  2. ^ Pugh, Emerson W.; Johnson, Lyle R.; Palmer, John H. (1991). IBM's 360 and Early 370 Systems. MIT Press. p. 710. ISBN 0262161230.

See also

Retrieved from "https://en.wikipedia.org/w/index.php?title=Attached_Support_Processor&oldid=589608914"