Jump to content

Electronic system-level design and verification

From Wikipedia, the free encyclopedia
This is an old revision of this page, as edited by France3470 (talk | contribs) at 23:53, 20 April 2013 (Link repair: Virtual Prototyping -> Virtual prototyping - You can help!). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Electronic system level (ESL) design and verification is an emerging electronic design methodology that focuses on the higher abstraction level concerns first and foremost. The term Electronic System Level or ESL Design was first defined by Gartner Dataquest, a EDA-industry-analysis firm, on February 1, 2001.[1] It is defined in the ESL Design and Verification book [2] as: "the utilization of appropriate abstractions in order to increase comprehension about a system, and to enhance the probability of a successful implementation of functionality in a cost-effective manner."

The basic premise is to model the behavior of the entire system using a high-level language such as C, C++, LabVIEW, or MATLAB or using graphical "model-based" design tools like SystemVue or Simulink. Newer languages are emerging that enable the creation of a model at a higher level of abstraction including general purpose system design languages like SysML as well as those that are specific to embedded system design like SMDL and SSDL supported by emerging system design automation products like Teraptor.[3] Rapid and correct-by-construction implementation of the system can be automated using EDA tools such as high-level synthesis and embedded software tools, although much of it is performed manually today. ESL can also be accomplished through the use of SystemC as an abstract modeling language.

Electronic System Level is now an established approach at most of the world’s leading System-on-a-chip (SoC) design companies, and is being used increasingly in system design.[citation needed] From its genesis as an algorithm modeling methodology with ‘no links to implementation’, ESL is evolving into a set of complementary methodologies that enable embedded system design, verification, and debugging through to the hardware and software implementation of custom SoC, system-on-FPGA, system-on-board, and entire multi-board systems.

See also

References

  1. ^ http://www.accessmylibrary.com/coms2/summary_0286-25381633_ITM
  2. ^ Brian Bailey, Grant Martin and Andrew Piziali, ESL Design and Verification: A Prescription for Electronic System Level Methodology. Morgan Kaufmann/Elsevier, 2007.
  3. ^ http://www.sankhya.com/info/products/teraptor/teraptor.html

Further reading

The template {{Expand}} has been deprecated since 26 December 2010, and is retained only for old revisions. If this page is a current revision, please remove the template.

  • Alice C. Parker, Yosef Tirat-Gefen, Suhrid A. Wadekar (2007). "System-Level Design". In Wai-Kai Chen (ed.). The VLSI handbook (2nd ed.). CRC Press. ISBN 978-0-8493-4199-1. chapter 76.{{cite book}}: CS1 maint: multiple names: authors list (link)
  • Brian Bailey; Grant Martin (2010). ESL Models and Their Application: Electronic System Level Design and Verification in Practice. Springer. ISBN 978-1-4419-0964-0.
  • Frank Rogin; Rolf Drechsler (2010). Debugging at the Electronic System Level. Springer. ISBN 978-90-481-9254-0.
  • Liming Xiu (2007). VLSI circuit design methodology demystified: a conceptual taxonomy. Wiley-IEEE. ISBN 978-0-470-12742-1.