Jump to content

Open Hardware and Design Alliance

Add links
From Wikipedia, the free encyclopedia
This is an old revision of this page, as edited by Madman (talk | contribs) at 22:37, 29 November 2012 (Madman moved page Talk:Open Hardware and Design Alliance/Temp to Open Hardware and Design Alliance without leaving a redirect: Replacing article with rewrite). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.
Logo of the Open Hardware and Design Alliance (OHANDA)

The Open Hardware and Design Alliance (OHANDA) aims at encouraging the sharing of open hardware and designs. The core of the project is a free online service where manufacturers of Open hardware and designs can register their products with a common label. This label maps the four freedoms of Free Software to physical devices and their documentation. It is similar to a non-registered trademark for hardware and can be compared to other certificates such as FCC or CE mark. OHANDA thus has the role of a self-organized registration authority.

License

The Open Hardware and Design Alliance has rewritten the four freedoms of Free Software as follows to match them to hardware resp. hardware documentation:

  1. Freedom 0: The freedom to use the device for any purpose.
  2. Freedom 1: The freedom to study how the device works and change it to make it to do what you wish. Access to the complete design is precondition to this.
  3. Freedom 2: Redistribute the device and/or design (remanufacture).
  4. Freedom 3: The freedom to improve the device and/or design, and release your improvements (and modified versions in general) to the public, so that the whole community benefits. Access to the complete design is precondition to this.
    — http://www.ohanda.org

The idea to create a label that makes open hardware and designs recognizable is due to the fact that copyright and copyleft are hard to realize in the context of physical devices. Instead of going through the lenghty and expensive process of patenting hardware to make it open, hardware developers and designers can put their products under a copyleft license by registering them on the OHANDA website. They can license their work under their own names and keep the devices' reuse open.

The procedure is the following: A hardware designer or manufacturer creates an account on the OHANDA website to get a unique producer ID. This account can either be for a person or for an organization. The terms and conditions he accepts to use the label imply that she grants the Four Freedoms to the users. The product is published under a copyleft license. Next, the manufacturer registers the product or design. A unique product ID will be issued. This ID is also referred to as the "OKEY". Now the manufacturer or designer can print or engrave the OHANDA label and the OKEY onto the device. This way, the device always carries the link to the open documentation and to all past contributors. Via the OHANDA website, users can trace back the artefact. At the same time, the label makes the openness of the product visible. Everyone is free to change the device and to share the new design with a new product ID on the website. The development can be seen by following the associations online.[1]

Development

The idea of creating a label for open source hardware came up at the GOSH! Summit (Grounding Open Source Hardware) at Banff Centre in Banff, Alberta in July 2009.[2] Since then, the active community members developed the project website[3] where OHANDA-labeled hardware can be registered. OHANDA launched a sticker campaign: The stickers show a crossed out closed box, symbolizing closed "black boxes". The stickers are meant to be put on all sorts of devices to make visible how little open source devices exist.

In 2011, OHANDA community members met at the Piksel11 festival in Bergen/Norway.[4] Since then, they have been using the term "reables" as a replacement for "Free/Libre Open Source Hardware".[5]

See also

Wikimedia Commons has media related to Open hardware.

References

  1. ^ http://opendesignnow.org/index.php/case/ohanda-jurgen-neumann/
  2. ^ http://www.banffcentre.ca/programs/program.aspx?id=888
  3. ^ http://www.ohanda.org
  4. ^ http://piksel.no/ocs/index.php/piksel/piksel11/paper/view/777
  5. ^ http://www.ohanda.org/reables
Retrieved from "https://en.wikipedia.org/w/index.php?title=Open_Hardware_and_Design_Alliance&oldid=525607170"