Jump to content

Distributed Interactive Simulation

From Wikipedia, the free encyclopedia
This is an old revision of this page, as edited by Tnxman307 (talk | contribs) at 18:31, 4 October 2010 (→Protocol data units: not reliably sourced). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Distributed Interactive Simulation (DIS) is an open standard for conducting real-time platform-level wargaming across multiple host computers and is used worldwide, especially by military organizations but also by other agencies such as those involved in space exploration and medicine.

History

The standard was developed over a series of "DIS Workshops" at the Interactive Networked Simulation for Training symposium, held by the University of Central Florida's Institute for Simulation and Training (IST). The standard itself is very closely patterned after the original SIMNET distributed interactive simulation protocol, developed by Bolt, Beranek and Newman (BBN) for Defense Advanced Research Project Agency (DARPA) in the early through late 1980s. BBN introduced the concept of dead reckoning to efficiently transmit the state of battle field entities.

In the early 1990s, IST was contracted by the United States Defense Advanced Research Project Agency to undertake research in support of the US Army Simulator Network (SimNet) program. Funding and research interest for DIS standards development decreased following the proposal and promulgation of its successor, the High Level Architecture (simulation) in 1996. HLA was produced by the merger of the DIS protocol with the Aggregate Level Simulation Protocol (ALSP) designed by MITRE.

There was a NATO standardisation agreement (STANAG 4482, Standardised Information Technology Protocols for Distributed Interactive Simulation (DIS), adopted in 1995) on DIS for modelling and simulation interoperability. This was retired in favour of HLA in 1998 and officially cancelled in 2010 by the NATO Standardisation Agency (NSA).

The DIS family of standards

DIS is defined under IEEE Standard 1278:

  • IEEE 1278-1993 - Standard for Distributed Interactive Simulation - Application protocols
  • IEEE 1278.1-1995 - Standard for Distributed Interactive Simulation - Application protocols
  • IEEE 1278.1-1995 - Standard for Distributed Interactive Simulation - Application protocols[1]
  • IEEE 1278.1A-1998 - Standard for Distributed Interactive Simulation - Application protocols Errata (May 1998)]
  • IEEE-1278.2-1995 - Standard for Distributed Interactive Simulation - Communication Services and Profiles
  • IEEE 1278.3-1996 - Recommended Practice for Distributed Interactive Simulation - Exercise Management and Feedback
  • IEEE 1278.4-1997 - Recommended Practice for Distributed Interactive - Verification Validation & Accreditation
  • IEEE 1278.5-XXXX - Fidelity Description Requirements (never published)

In addition to the IEEE standards, the Simulation Interoperability Standards Organization (SISO) maintains and publishes an "enumerations and bit encoded fields" document yearly. This document is referenced by the IEEE standards and used by DIS, TENA and HLA federations. Both PDF and XML versions are available.

Current status

SISO, a sponsor committee of the IEEE, promulgates improvements in DIS. Major changes are already in the DIS 7 draft update to IEEE 1278.1[1] to make DIS more extensible, efficient and to support the simulation of more real world capabilities.[2]

Application protocol

Simulation state information is encoded in formatted messages, known as protocol data units (PDUs) and exchanged between hosts using existing transport layer protocols, including multicast, though broadcast User Datagram Protocol is also supported. There are several versions of the DIS application protocol, not only including the formal standards, but also drafts submitted during the standards balloting process.

  • Version 1 - Standard for Distributed Interactive Simulation - Application Protocols, Version 1.0 Draft (1992)
  • Version 2 - IEEE 1278-1993
  • Version 3 - Standard for Distributed Interactive Simulation - Application Protocols, Version 2.0 Third Draft (May 1993)
  • Version 4 - Standard for Distributed Interactive Simulation - Application Protocols, Version 2.0 Fourth Draft (March 1994)
  • Version 5 - IEEE 1278.1-1995
  • Version 6 - IEEE 1278.1a-1998 (amendment to IEEE 1278.1-1995)
  • Version 7 - IEEE 1278.1-2010 (in preparation - scheduled for completion and IEEE balloting in the Spring of 2010. See External Link - DIS Product Development Group.) Version 7 is also called DIS 7[2]. This is a major upgrade to DIS to enhance extensibility and flexibility. It provides extensive clarification and more details of requirements, and adds some higher-fidelity mission capabilities.[2]

See also

References

  1. ^ a b "Corrections to Standard for Distributed Interactive Simulation - Application protocols" (PDF). IEEE. Retrieved 10100517. {{cite web}}: Check date values in: |accessdate= (help)
  2. ^ a b c DIS 7 Overview, SISO PSG File Library
Retrieved from "https://en.wikipedia.org/w/index.php?title=Distributed_Interactive_Simulation&oldid=388732139"