Problems in coal mining
 | This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these messages)
No issues specified. Please specify issues, or remove this template. |
Coal mining cannot be done everywhere with coal, due to certain restrictions.
Problems
Faulting
If a coal seam reaches a fault, the coal seam may be significantly displaced, depending on the type of fault and its offset. Machinery trying to mine the coal may not be able to reach the displaced seam, if the displacement is too large. Coal mines use a combination of boreholes and high-resolution seismic reflection data to identify the larger faults and avoid the most faulted areas at the mine planning stage.[1]
Water table
If the water table is too high, the mine will flood with water. While mining, water needs to be constantly pumped out and this is expensive.
Washout
If a distributary or river changes course and cuts into the swamp material that will form coal, the coal seam is not fully formed and there may be a problem with mining it[clarification needed]. sammy is also very cool!
Thickness of seams
If the seams are too thin it may be uneconomic to mine it (i.e. the cost of production exceeds the selling price).
Splitting of seams
If the seam splits, due to a delta collapsing, sand and silt sediments pile up on top until that area is covered. This may make all or part of the coal seam uneconomical to mine (as it is too thin).
References
- ^ Cocker, J. (1997). "A High Resolution Seismic Survey to Assist in Mine Planning". In Gubins A.G. (ed.). Proceedings of Exploration 97: Fourth Decennial International Conference on Mineral Exploration (PDF). pp. 473–476. Retrieved 2009-11-17.
{{cite book}}: Unknown parameter|coauthors=ignored (|author=suggested) (help)
 | This article about mining is a stub. You can help Wikipedia by expanding it. |