Discontinuity layout optimization

Nice DLO image to go here

Discontinuity layout optimization (DLO) is an engineering analysis procedure which can be used to directly establish the amount of load that can be carried by a solid or structure prior to collapse. Using DLO the layout of failure planes, or 'discontinuities', in a collapsing solid or structure are identified using mathematical optimization methods (hence the name, 'discontinuity layout optimization'). It is assumed that failure occurs in a ductile or ' plastic' manner.

How it works

The DLO procedure involves a number of steps, as outlined below.

The set of potential discontinuities can include discontinuities which crossover one another, allowing complex failure patterns to be identified (e.g. involving ‘fan’ mechanisms, where many discontinuities radiate from a point).

DLO can be formulated in terms of equilibrium relations ('static' formulation) or in terms of displacements ('kinematic' formulation). In the latter case the objective of the mathematical optimization problem which results is to minimize the internal energy dissipated along discontinuities, subject to nodal compatibility constraints. This can be solved using efficient linear programming techniques, and it has been found that modern computer power can be used to directly search through very large numbers of different failure mechanism topologies (up to approx. 2^{1,000,000,000} different topologies on current generation PCs). A full description of the application of DLO to plane strain problems was provided by Smith and Gilbert

DLO vs FEM

Whereas with finite element analysis (FEM), a widely used alternative engineering analysis procedure, mathematical relations are formed for the underlying continuum mechanics problem, DLO involves analysis of a potentially much simpler discontinuum problem, with the problem being posed entirely in terms of the individual discontinuities which interconnect nodes laid out across the body under consideration. Additionally, when general purpose finite element programs are used to analyse the collapse state often relatively complex non-linear solvers are required, in contrast to the simpler linear programming solvers generally required in the case of DLO.

Compared with non-linear FEM, DLO has the following advantages and disadvantages:

Advantages

• The collapse state is analysed directly, without the need to iterate.
• Problems involving singularities in the stress or displacement fields can be dealt with without difficulty.

Disadvantages

• DLO provides no information about displacements (or stresses) prior to collapse.
• DLO is a relatively new technique so only a limited range of software tools are currently available.

Applications

DLO is perhaps most usefully applied to engineering problems where traditional hand calculations are difficult or simplify the problem too much, but where recourse to more complex non-linear FEM is not justified. Applications include:

• Analysis of geotechnical engineering problems (e.g. slope stability, bearing capacity or retaining wall problems).
• Analysis of concrete slab problems.

Software using Discontinuity Layout Optimization

• DLO MATLAB script (2009-) Provided by the CMD research group at the University of Sheffield, UK.
• LimitState:GEO (2008-) General purpose geotechnical software application.

External References

• DLO teaching resources provided by the Geotechnical Engineering Research Group at the University of Sheffield, UK.