Factory

This article is about manufacturing plants and different kinds of factories. For other uses, see Factory (disambiguation).

Volkswagen factory in Wolfsburg, Germany.

The assembly plant of the Bell Aircraft Corporation at Wheatfield, New York, United States, 1944

A factory worker in 1940s Fort Worth, Texas, United States.

A factory (previously manufactory) or manufacturing plant is an industrial building where workers manufacture goods or supervise machines processing one product into another. Most modern factories have large warehouses or warehouse-like facilities that contain heavy equipment used for assembly line production. Typically, factories gather and concentrate resources: workers, capital and plant.

History of the factory

Many believed that ancient China had been the first to create factories. In ancient China, imperial and private workshops, mills, and small manufactories had been employed since the Eastern Zhou Dynasty (771-221 BC), as noted in the historical text of the Zhou Li. During the medieval Song Dynasty (960-1279 AD), independent and government sponsored industries were developed to meet the needs of a growing population that had reached over 100 million. For example, for the printing of paper money alone, the Song court established several government-run factories in the cities of Huizhou, Chengdu, Hangzhou, and Anqi. The size of the workforce employed in these paper money factories were quite large, as it was recorded in 1175 AD that the factory at Hangzhou alone employed more than a thousand workers a day. The Chinese iron industry was also expanded during the Song Dynasty, with a sixfold increase in per capita cast iron output between the years 806 and 1078 AD, meaning an overall weight of 127,000,000 kg (125,000 t) of cast iron product from state-run facilities was forged in the latter year alone.

Middle East

See also: Alchemy and chemistry in Islam and Inventions in the Islamic world

The first industrial complex for glass and pottery production was built in Ar-Raqqah, Syria, in the 8th century. Extensive experimentation was carried out at the complex, which was two kilometres in length, and a variety of innovative high-purity glass were developed there. Two other similar complexes have also been discovered, and nearly three hundred new chemical recipes for glass are known to have been produced at all three sites. The first glass factories were thus built by Muslim craftsmen in the medieval Islamic world. The first glass factories in Europe were later built in the 11th century by Egyptian craftsmen in Corinth, Greece.

The first factory milling installations were built by Muslim engineers throughout every city and urban community in the Muslim world. For example, the factory milling complex in 10th century Baghdad could produce 10 tonnes of flour every day. The first large milling installations in Europe were built in 12th century Islamic Spain. The first sugar refineries were also built by Muslim engineers. They were first driven by water mills, and then windmills from the 9th and 10th centuries in Afghanistan, Pakistan, and Iran.

Western world

Adolph von Menzel: Moderne Cyklopen

Although large mills and factories, called fabricaes , were established in ancient Rome, the Venice Arsenal provides one of the first examples of a factory in the modern sense of the word. Founded in 1104 in Venice, Italy, several hundred years before the Industrial Revolution, it mass-produced ships on assembly lines using manufactured parts. The Venice Arsenal apparently produced nearly one ship every day and, at its height, employed 16,000 people.

Many historians regard Matthew Boulton's Soho Manufactory (established in 1761 in Birmingham) as the first modern factory. (Other claims might be made for John Lombe's silk mill in Derby (1721), or Richard Arkwright's Cromford Mill (1771)—purpose built to fit the equipment it held and taking the material through the various manufacturing processes.) One historian, Jack Weatherford, contends that the first factory was in Potosí, for processing silver ingot slugs into coins, because there was so much silver being mined close by. . See City and Factory Life for more background concerning conditions of work.

British colonies in the late 18th century built factories simply as buildings where a large number of workers gathered to perform hand labor, usually in textile production. This proved more efficient – for administration and for the distribution of raw materials to individual workers – than earlier methods of manufacturing such as cottage industries or the putting-out system.

Cotton mills used inventions such as the steam engine and the power loom to pioneer the industrial factory of the 19th century, where precision machine tools and replaceable parts allowed greater efficiency and less waste.

Between 1820 and 1850, the non-mechanized factories supplanted the traditional artisan shops as the predominant form of manufacturing institution. Even though the theory on why and how the non-mechanized factories gradually replaced the small artisan shops is still ambiguous, what is apparent is that the larger-scale factories enjoyed technological gains and advance in efficiency over the small artisan shops. In fact, the larger scale forms of factory establishments were more favorable and advantageous over the small artisan shops in terms of competition for survival.

Henry Ford further revolutionized the factory concept in the early 20th century, with the innovation of mass production. Highly specialized workers situated alongside a series of rolling ramps would build up a product such as (in Ford's case) an automobile. This concept dramatically decreased production costs for virtually all manufactured goods and brought about the age of consumerism.

In the mid- to late 20th century, industrialized countries introduced next-generation factories with two improvements:

1. Advanced statistical methods of quality control, pioneered by the American mathematician William Edwards Deming, whom his home country initially ignored. Quality control turned Japanese factories into world leaders in cost-effectiveness and production quality.
2. Industrial robots on the factory floor, introduced in the late 1970s. These computer-controlled welding arms and grippers could perform simple tasks such as attaching a car door quickly and flawlessly 24 hours a day. This too cut costs and improved speed.

Some speculation as to the future of the factory includes scenarios with rapid prototyping, nanotechnology, and orbital zero-gravity facilities.

Siting the factory

Before the advent of mass transportation, factories' needs for ever-greater concentrations of workers meant that they typically grew up in an urban setting or fostered their own urbanization. Industrial slums developed, and reinforced their own development through the interactions between factories, as when one factory's output or waste-product became the raw materials of another factory (preferably nearby). Canals and railways grew as factories spread, each clustering around sources of cheap energy, available materials and/or mass markets. The exception proved the rule: even greenfield factory sites such as Bournville, founded in a rural setting, developed its own housing and profited from convenient communications networks.

Regulation curbed some of the worst excesses of industrialization's factory-based society, a series of Factory Acts leading the way in Britain. Trams, automobiles and town planning encouraged the separate development of industrial suburbs and residential suburbs, with workers commuting between them.

Though factories dominated the Industrial Era, the growth in the service sector eventually began to dethrone them: the locus of work in general shifted to central-city office towers or to semi-rural campus-style establishments, and many factories stood deserted in local rust belts.

The next blow to the traditional factories came from globalization. Manufacturing processes (or their logical successors, assembly plants) in the late 20th century re-focussed in many instances on Special Economic Zones in developing countries or on maquiladoras just across the national boundaries of industrialized states. Further re-location to the least industrialized nations appears possible as the benefits of out-sourcing and the lessons of flexible location apply in the future.

New England Factories in the 19th Century

In New England in the early to mid-19th century, many cotton and textile factories employed large numbers of female adolescent workers from the New England area. The girls came from families of middling farmers. Most viewed mill factory work as a way to branch out from their rural lives, and labored, not only to send money back home, but to gain greater social & economic independence. They were able to earn enough through factory work to cover their living expenses and still have spending money and savings for dowries.

In 1834 New England textile factory owners decided to cut the wages of these young women in order to save money. In response, the young factory workers organized turnouts (strikes) in an attempt to force their employers to raise wages again. These young women viewed themselves as equals to their managers. They saw their wage reductions as attempts to take away their economic independence and force them to become completely dependent upon factory employment for survival - to make them “slaves” to their employers. Because of bad timing and poor organization their 1834 factory turnout was unsuccessful, but it did lay the foundation for successful strikes that helped shape factory life in the future.

Governing the factory

Much of management theory developed in response to the need to control factory processes. Assumptions on the hierarchies of unskilled, semi-skilled and skilled workers and their supervisors and managers still linger on; however an example of a more contemporary approach to work design applicable to manufacturing facilities can be found in Socio-Technical Systems (STS).

See Further Articles

• Christian, Gallope, D (1987) 'Are the classical management functions useful in describing managerial work?' Academy of Management Review. v 12 n 1, p38-51.
• Peterson, T (2004) 'Ongoing legacy of R.L. Katz: an updated typology of management skills', Management Decision. v 42 n10, p1297-1308.
• Mintzberg, H (1975) 'The manager's job: Folklore and fact' , Harvard Business Review, v 53 n 4, July - August, p49-61.
• Hales, C (1999) 'Why do managers do what they do? Reconciling evidence and theory in accounts of managerial work', British Journal of Management, v 10 n4, p335-350.
• Mintzberg, H (1994) 'Rounding out the Managers job', Sloan Management Review, v 36 n 1 p 11-26.
• Rodrigues, C (2001) 'Fayol’s 14 principles then and now: A framework for managing today’s organizations effectively', Management Decision, v 39 n10, p 880-889
• Twomey, D. F. (2006) 'Designed emergence as a path to enterprise', Emergence, Complexity & Organization, Vol. 8 Issue 3, p12-23.
• McDonald, G (2000) Business ethics: practical proposals for organisations Journal of Business Ethics. v 25(2) p 169-185

See also

• Factory farm
• Industrial railway
• Industrial Revolution
• List of production topics
• Manufacturing
• Plant layout study
• Software factory
• Recovered factory

References

• Needham, Joseph (1986). Science and Civilization in China: Volume 5, Part 1. Taipei: Caves Books, Ltd.
• ¹ Thomas, Dublin(1995). "Transforming Women’s Work page: New England Lives in the Industrial Revolution 77, 118" Cornell University Press.
• ² Thomas, Dublin(1981) "Women at Work: The Transformation of Work and Community in Lowell, Massachusetts, 1826-1860: Page 86-107" New York: Columbia University Press.
• Biggs, Lindy (1996). The rational factory: architecture, technology, and work in America's age of mass production. Johns Hopkins University Press. ISBN 9780801852619.

External links

• Qualitionary - Legal Definitions - Factory
• Qualitionary - Legal Definitions - Plant