Jump to content

Wikipedia:WikiProject Geographical coordinates/Linear

From Wikipedia, the free encyclopedia
This is an old revision of this page, as edited by LtPowers (talk | contribs) at 13:48, 16 July 2009 (remove construction tag). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

There are a number of ways in which coordinates relating to linear features can be added to Wikipedia. As yet, there is no single method which has achieved consensus.

The best method may depend on the type of feature, its length, and the number of significant points of interest along it (though such points need not be sufficiently notable as to warrant their own article)

What are linear features

Linear features include, but are not limited to:

  • Tracks, trails, etc.
  • Roads
  • Railway lines
  • Bridges
  • Tunnels
  • Canals
  • Borders
  • Rivers
  • Valleys
  • Mountain ranges

Options

Editors may give:

  • One pair of coordinates, for the mid point
  • One pair of coordinates, for the most significant point (e.g. the estuary or mouth of a river)
  • Two pairs of coordinates, one for each end
  • Three pairs of coordinates, combining the above
  • Multiple coordinates, for points of interest
  • No coordinates

Main coordinates

In any of the above cases, which involve more than one pair of coordinates, a single (or "main") pair may be used as the coordinates for the whole article (and for its inclusion in partner sites such as Google Maps).

A "main" coordinate may not be appropriate for very long features; the definition of "very long" in this context is yet to be determined.

Flexibility is needed in order to label a representative point. For example, a canal's "main" coordinates may be best given as a point where it is a body of water; a nearby location may be better than a midpoint occupied by a notable or atypical object such as a tunnel or causeway.

Solutions

Templates

These templates may be useful:

  • {{coord}} - for each point's coordinates
  • {{kml}} - maps of all coordinates; coordinates as KML download; etc.

Draft recommendations

feature main coordinates 1 further recommended coordinates 2 optional additions3 examples
bridge midpoint5 both ends features crossed, support pillars
canal midpoint5 both ends junctions, wharves, crossings, locks
unburied pipeline midpoint5 endpoints pumping stations, junctions, major changes in direction
buried pipeline one endpoint other endpoint and midpoint5 pumping stations
railway midpoint5 both ends stations, former stations, junctions
river estuary/mouth source, major confluences crossings, other confluences, boundaries crossed, weirs, major changes in direction, islands
road midpoint5 both ends major towns passed, major junctions, major features crossed M6
tunnel one endpoint other endpoint and midpoint5 ventilation shafts
valley ??? both ends? watersheds, rivers, settlements, landmarks, features

Notes:

  1. See above.
  2. For very short features (e.g. a small bridge) just the mid-point will suffice.
  3. For very long features, only major points of interest should be included.
  4. Route is a series of paths, as in a highway route. Or a long distance hiking trail, a series of individual trails which (usually) connect. To be unambiguous, the point must not be near any intersection
  5. "Midpoint" is not meant to be strictly the mathematical midpoint, but a representative point of the feature near its middle. If this should fall in a non-representative portion, the coordinate point chosen should be moved further toward one end. If the midpoint of a highway falls at an intersection with another highway, the coordinate chosen should be moved some distance from the intersection so that the other highway is not misinterpreted as the feature. Likewise, a highway portion which splits into two streets (as in an urban one way grid) should not be used as the selected point unless that is representative of the feature.

Out of scope

This guideline is not intended to cover: