Talk:Comparison of Office Open XML and OpenDocument

Big problem with this article

It compares (in its central table) ODF with OOXML - but there are at least three distinct versions of each of these specs. If this article is to be of use, some way needs to be found to distinguish exactly which versions are being compared. Alexbrn (talk) 10:57, 30 March 2009 (UTC)[reply]

Agreed - I specified ODF 1.0 and the ECMA standard of OOXML, which are the ones that correspond to the values in the table (as far as I know) Yannh (talk) 00:05, 15 May 2009 (UTC)[reply]

HAL: could you precise why you keep removing the versions of the file format we are comparing? I agree with Alexbrn that it doesn't make much sense if we do not precise which versions of the formats are being compared Yannh (talk) 13:41, 15 May 2009 (UTC)[reply]

SVG in ODF ?

The table suggest ODF uses SVG but this is not correct. ODF uses some sort of ODF particular SVG variant and some additional 3d draw elements. hAl (talk) 20:21, 15 October 2008 (UTC)[reply]

Well, go ahead and fix it. :) Ghettoblaster (talk) 20:30, 15 October 2008 (UTC)[reply]

ODF container

As far as I understand it is close to the Java archive format (JAR). Mayby JAR-like would be a reasonalbe description ?

Yeah, I think you're correct. Go ahead and fix it. :) Ghettoblaster (talk) 20:30, 15 October 2008 (UTC)[reply]

ISO 29500 compatibility and Microsoft Office 2007

http://www.microsoft.com/Presspass/press/2008/may08/05-21ExpandedFormatsPR.mspx

"In addition, Microsoft has defined a road map for its implementation of the newly ratified International Standard ISO/IEC 29500 (Office Open XML). IS29500, which was approved by the International Organization for Standardization (ISO) and International Electrotechnical Commission (IEC) in March, is already substantially supported in Office 2007, and the company plans to update that support in the next major version release of the Microsoft Office system, code-named ?Office 14.? "

Substantially supported is not supported.

http://www.computerworld.com/action/article.do?command=viewArticleBasic&taxonomyName=Protocols+and+Standards&articleId=9089258&taxonomyId=141&pageNumber=1

"Changes were made to Office Open XML between Ecma International's approval of the file format as a standard a year and a half ago and the ISO standards body's ratification of it this spring. Microsoft Corp. won't support the ISO version of its own format until Office 14 arrives around the end of 2009."

Nobody claims that Microsoft Office supports ISO/IEC IS 29500 yet. Though it might be the case that documents conforming to the ECMA 376 1^st edition standard are also conforming to ISO/IEC IS 29500 (ECMA 376 2^nd edition) because the latter specifies six levels of document and application conformance, strict and transitional for each of WordprocessingML, PresentationML and SpreadsheetML. However, whether you like it our not Microsoft Office still supports Office Open XML.

Please sign your posts in the future. Thanks. Ghettoblaster (talk) 15:58, 14 May 2009 (UTC)[reply]

Ok - I have kept your notes on this then, and specified the versions we are comparing. I believe the previous table was implying that microsoft office was supporting the ISO standard. How about separating adding a column for the ISO recognised OOXML, and for ODF 1.2? Yannh (talk) 23:52, 14 May 2009 (UTC)[reply]

Implementations covered by patent license

This doesn't seem correct? According to this: http://xml.coverpages.org/ni2005-10-04-a.html#nonAssert :

"Sun irrevocably covenants that, subject solely to the reciprocity requirement described below, it will not seek to enforce any of its enforceable U.S. or foreign patents against any implementation of the Open Document Format for Office Applications (OpenDocument) v1.0 ."

It seems that Sun Microsystems isn't the only one who owns interlectual property rights for OpenDocument. IBM's Interoperability Specifications Pledge states that: [1]

"Covered Implementations" are those specific portions of a product (hardware, software, services or combinations thereof) that implement and comply with a Covered Specification and are included in a fully compliant implementation of that Covered Specification. Reference to IBM (or you) includes entities controlled by, controlling, and under common control with IBM (or you), based on majority control.

Ghettoblaster (talk) 16:07, 14 May 2009 (UTC)[reply]

ODF signatures

According to this http://blogs.sun.com/dancer/entry/dispelling_myths_around_odf , ODF 1.2 supports digital signatures - are we comparing specific versions of ODF and OOXML? Maybe we hould add a table ODF 1.0, 1.1, 1.2? —Preceding unsigned comment added by Yannh (talk • contribs) 10:42, 14 May 2009 (UTC)[reply]

AFAIK ODF 1.2 is nothing more than a draft specification, it is not even an OASIS standard. Since OpenOffice.org's default format is infact an implementation of the ODF 1.2 draft, one might argue that the current version of OpenOffice.org doesn't even use an open standard file format by default. Oh, and btw. if there are really no row/column limitations in the ODF specification, then this means that no version of OpenOffice.org fully conforms to this specification, because all OpenOffice.org versions have row/column limitations.[2] Ghettoblaster (talk) 16:18, 14 May 2009 (UTC)[reply]

One could argue that MS Word saves in the ecma standardized version of OOXML which is not ISO - and has actually never used an open standard in the past... And again according to this link : http://www.microsoft.com/Presspass/press/2008/may08/05-21ExpandedFormatsPR.mspx , even the latest version of MS Office doesn't support the ISO standard.... Yannh (talk) 10:18, 15 May 2009 (UTC)[reply]

Actually the Ecma 376 standards is nearly identical ISO/IEC 29500 transitonal. So implementation of Ecma 376 implies that ISO/IEC 29500 transitional is supported. The Ecma 376 version is at the moment the most used version as is the OASIS ODF 1.1 version for ODF. hAl (talk) 10:31, 15 May 2009 (UTC)[reply]

Hello Hal, agreed, but - Openoffice supports ODF 1.0 (iso) although even microsoft recognizes that they do not support the openxml ISO standard ? This is the cause of my edits Yannh (talk) 13:37, 15 May 2009 (UTC)[reply]

That is irrelevant to this article. It is about the format and support for it. Not about what version which in both formats is rather complex. hAl (talk) 08:54, 16 May 2009 (UTC)[reply]

So you are saying it is irrelevant which version of the format we are speaking of? But you add several points that vary from version to version - for example signatures are supported in ODF 1.2. I second AlexBrn in his very first comment on that page that we should precise which versions we are talking about. Yannh (talk) 16:33, 16 May 2009 (UTC)[reply]

Most popular editor

I have changed this to a plural, as there are quite a few editors for ODF (just cited the most populars though). Is there any reason why we should list only one? Saying that Openoffice is "the most popular" seems subjective to me and lacks sources... Yannh (talk) 00:01, 15 May 2009 (UTC)[reply]

Could you back up the suggested popularity of MS Office, KOffice and Lotus notus for editing ODF files with any sources ? I personally have never come across ODF files from any of those three suites in the wild. Most likely OOo is number one and way way way behind that is Google apps. hAl (talk) 10:06, 15 May 2009 (UTC)[reply]

Quite a few success stories for Lotus Notes here: http://www-01.ibm.com/software/success/cssdb.nsf/topstoriesFM?OpenForm&Site=lotus&cty=en_us Yannh (talk) 10:18, 15 May 2009 (UTC)[reply]

I have not doubt the Notes product can be succesfull but I think that Lotus notes is often used with defualt support for the old binary ms office files rather than ODF. The link you provide deos not give any indication on use of ODF. Is there support for it being a succesfull ODF editer ? hAl (talk) 10:26, 15 May 2009 (UTC)[reply]

I bet my relatives don't count :) What makes you think it is used mainly with support for the old binary ms office? Yannh (talk) 13:37, 15 May 2009 (UTC)[reply]

I think using the plural version is a bad idea. How do we decide what is popular enough the be in such a list and what is not? It should be fairly easy to find out which application is the most popular and has the biggest market share. If we don't have any restriction here, people are going to add more and more of their favourite editors/viewers to this list that are "somewhat popular" in their opinion. Ghettoblaster (talk) 17:09, 15 May 2009 (UTC)[reply]

I do not see any good reason for listing only one (as there is actually no full implementation of the ISO OOXML - although there are plenty that support ODF 1.0) . On the other hand - I am unsure about the list of features that you added to the table to make OOXML green and ODF red are very relevant - could you explain why you think they are relevant? Because if we start an in depth features review that goes as deep as signatures, that table might get pretty long. Yannh (talk) 00:48, 16 May 2009 (UTC)[reply]

It does not matter if there are full implementations of the ISO/IEC IS 29500:2008 just as it does not matter if there are full implementations of ODF 1.2. This article is a comparision of Office Open XML and OpenDocument. There are several versions of both standards. I think that mentioning the most popular editor/viewer for each format is useful for the reader that might want to edit/view such documents. Since we can never include all applications that support these formats, I think it is fair to only add one for each format with the biggest market share. Regarding the features I added, I think these are relevant for this comparision, because they are widely used among users of office suites. People should be aware of the limitations of a document file format. Ghettoblaster (talk) 12:17, 16 May 2009 (UTC)[reply]

It does matter completely on the opposite. If someone wants to use a software that will save files in an ISO standard, this table gives the incorrect information that MS Office will allow him to save in the ISO version of OOXML which is incorrect. Yannh (talk) 16:33, 16 May 2009 (UTC)[reply]

I'm not sure which article you are reading, but this page does not suggest that Microsoft Office supports the ISO standard. This is not a simple comparision of ISO formats. This article compares two popular document formats of which certain versions have been standardized by ISO. Ghettoblaster (talk) 18:08, 16 May 2009 (UTC)[reply]

This seems a bit restricted as a feature ODF does support limited change tracking. But for instance not in tables and not in math equations.