Jump to content

Distributed mode loudspeaker

From Wikipedia, the free encyclopedia
This is an old revision of this page, as edited by Dancter (talk | contribs) at 06:12, 23 February 2009 (expanding applications section). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

The distributed mode loudspeaker (DML) is a flat panel loudspeaker technology in which sound is produced by inducing uniformly distributed vibration modes in the panel through a special electro-acoustic exciter. Distributed mode loudspeakers function differently than most other loudspeakers, which typically produce sound by inducing pistonic motion in the diaphragm. The technology is developed by NXT.

Exciters for distributed mode loudspeakers include, but are not limited to, moving coil and piezoelectric devices, and are placed to correspond to the natural resonant model of the panel.

Advantages and disadvantages

Advantages
  • Broad frequency range (100 – 18000 Hz for 0.6m2 panel).
  • Smaller fading with distance. Example: 3.5 meter distance 4dB for — DML; 11dB — dynamic moving coil loudspeakers.
  • The air radiation resistance is small and constant with frequency. This means that directivity is not affected by size of speaker.[1]
  • Bipolar (radiates sound in 2 directions), but may be made forward directed.
  • Flat, may be produced in different shapes, may be decorated etc.
  • Some DML units are designed to be plastered into walls and completely hidden.
  • Don't require enclosing.
Disadvantages
  • Problems radiating low frequencies. Increase in size makes it possible to radiate sound with lower frequencies.[2]

Applications

NXT licenses two classes of distributed mode loudspeaker: SurfaceSound for traditional flat-panel applications, and SoundVu for applications in which sound is produced directly in front of the display (either through a projection screen which functions as a DML or a transparent DML overlaid on the display). SurfaceSound technology has been incorporated into a number of novel products such as school equipment[3] and portable cardboard speakers (SoundpaX, an OEM product manufactured by a number of different companies). Aside from projection screens, SoundVu has been integrated into computer and mobile phone displays.

NXT also licenses the Balanced Mode Radiator (BMR), a hybrid technology that blends DML technology with that of traditional pistonic-action loudspeakers.[2] The resultant speakers feature the small radiating-area low-frequency performance of a pistonic-action loudspeaker, but with a wider directivity and shallower profile. The two types of BMR offered are: the Audio Full Range (AFR), a full-range optimized circular speaker; and the High Aspect Ratio Panel (HARP), a long and thin form factor for use in narrower spaces.[4]

Some DMLs are compatible with traditional amplifiers.[5]

Initial testing by researchers at the Delft University of Technology concluded that DML panels are good potential candidates for use in wave field synthesis applications, as they are light and can be placed close to walls.[6]

References

  1. ^ ""A flat response" by Peter Mapp, svconline.com". Retrieved 2007-02-10.
  2. ^ a b Azima, Henry (2004-08-05). "Flat speaker delivers volumes of sound". EDN (magazine). Reed Business Information. Retrieved 2009-02-10.
  3. ^ "MeadWestvaco lines up major marketing campaign for new NXT-based products". NXT plc. 2007-07-17. Retrieved 2009-02-23.
  4. ^ "Balanced Mode Radiator". NXT plc. Retrieved 2009-02-23.
  5. ^ "Official FAQ". NXT plc. Retrieved 2007-02-10.
  6. ^ Marinus M. Boone. "On The Applicability of Distributed Mode Loudspeaker Panels for Wave Field Synthesis Based Sound Reproduction" (PDF). Retrieved 2007-02-10. Hence, it can be concluded that the DML speakers are worth to be further investigated for WFS-applications. {{cite web}}: Unknown parameter |coauthors= ignored (|author= suggested) (help)
Retrieved from "https://en.wikipedia.org/w/index.php?title=Distributed_mode_loudspeaker&oldid=272665755"