Direct injection expanded foam molding

Direct injection expanded foam molding - injection molded foam is a foam manufacturing process that creates soft foam products direct from compound into a final product. This process eliminates the steps required for die-cutting and compression molding, as it manufactures the foam and product simultaneously,

The base resin used in a complex formula is an ethylene based polyolefin elastomer (like polyethylene and EVA). Foam manufactured with these resins has many physical benefits. Unlike a sponge, foams from this process are closed-cell, meaning it's waterproof and resists mold, mildew and bacteria from entering the material.

It is also cross-linked, which means the cells are connected in a way that makes the foam strong and durable with high tear and tensile strength.

All polyolefin elastomers are also resistant to most chemicals which allow the products to not only be used in a chemical environment but also very cleanable with most household cleaners.

The process itself is very interesting as the injected compound is not foam until an endothermic reaction in a hot mold activates the blowing agents, resulting in an expanded foam part. This requires the mold cavity size to be smaller than the final part. The actual known expansion is created within the formula so that when the part "self-ejects" from the mold, at the end of the cycle, it grows to the require part size.

As you can see, the cavity for this tire is considerably smaller than the final tire size.

[1]

This process is valuable for any foam product that needs to have lots of detail, and be very durable.