Jump to content

Open Firmware

From Wikipedia, the free encyclopedia
This is an old revision of this page, as edited by Progdev (talk | contribs) at 21:19, 30 October 2007. The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Open Firmware (also, OpenBoot) is a hardware-independent firmware (computer software which loads the operating system), developed by Mitch Bradley at Sun Microsystems, and used in post-NuBus PowerPC-based Apple Macintosh computers, Sun Microsystems SPARC based workstations and servers, IBM POWER systems, Pegasos systems, and the laptop designed by OLPC among others. It is available under a BSD license.[1] The proposed Power Architecture Platform Reference will also be Open Firmware based. Open Firmware is accessed via a Forth-based shell interface and fulfills many of the same tasks as BIOS does on PC computers, although Open Firmware is considerably more powerful than BIOS. For example, due to the power of Forth (a high-level language), it is possible to program Open Firmware to solve the Tower of Hanoi problem.[2]

Open Firmware (or "OF") was described by IEEE standard IEEE 1275-1994, which was not reaffirmed by the Open Firmware Working Group (OFWG) since 1998 and has therefore been officially withdrawn by IEEE. This means it is unavailable from the IEEE, but the last text is available from the Forth research project at the Institute of Computer Languages, Vienna University of Technology in Austria.

Several commercial implementations of Open Firmware have been released to the Open Source community in 2006, including SUN OpenBOOT, Firmworks OpenFirmware and Codegen SmartFirmware. The source code is available from the OpenBIOS project.

Advantages

Because the Open Firmware Forth code is compiled into FCode (a bytecode) and not into the machine language of any particular computer architecture, Open Firmware code included in, say, an I/O card can be executed by any system that uses Open Firmware. In this way, an I/O card can provide boot-time diagnostics, configuration code, and device drivers that will be usable on any system running Open Firmware, allowing many of the same I/O cards to be used on Sun systems and Macintoshes.

Being based upon an interactive programming language, Open Firmware can be used to quickly test and bring up new hardware.

Access

On Sun systems, the Open Firmware interface is displayed on the console terminal before the bootstrapping of the system software. If a keyboard is connected, the main video display will be used as the console terminal and Open Firmware can be re-entered at any time by pressing Stop-A (L1-A) on the keyboard. If no keyboard is connected, then the first serial line on the system is usually used as the console and Open Firmware is re-entered by sending a "Break" on the serial line. While the system software is running, various Open Firmware settings can be read or written using the eeprom command.

On a PowerPC-based[3] Macintosh, the Open Firmware interface can be accessed by pressing the keys Cmd-Option-O-F at startup. This functionality is generally only used by developers or troubleshooting I.T. personnel; for common users, the Mac OS X operating system provides a high level graphical user interface to change commonly used Open Firmware settings. For instance, it is possible to specify the boot disk or partition without directly using the Open Firmware interface. Other Open Firmware settings can be changed using the nvram command while the system software is running.

On Pegasos, simply press Esc at startup.

On IBM POWER systems, Open Firmware ("ok" prompt) can be accessed through the SMS Boot Menu. SMS Boot Menu can be accessed by pressing "1" or "F1" during the boot sequence, after hardware checking, and just before the OS boot.

See also

Notes and references

  1. ^ http://laptop.media.mit.edu/laptopnews.nsf/2e76a5a80bc36cbf85256cd700545fa5/2cc25a58f0d1a6e8852572070033befc?OpenDocument
  2. ^ Source Code at http://www.kernelthread.com/publications/firmware/src/ofhanoi.txt
  3. ^ Intel-based Macintoshes do not use Open Firmware; they use Extensible Firmware Interface. See also: Apple's transition to Intel processors. Also early versions (before the PowerBook 3400) connect Open Firmware's input and output to the Modem port by default.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Open_Firmware&oldid=168165363"