Jump to content

Digital signal controller

From Wikipedia, the free encyclopedia
This is an old revision of this page, as edited by Travelingseth (talk | contribs) at 22:59, 2 July 2007 (Created page with 'A digital signal controller (DSC) can be thought of as a hybrid of microcontrollers and DSP processors. Like micro...'). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.
(diff) ← Previous revision | Latest revision (diff) | Newer revision → (diff)

A digital signal controller (DSC) can be thought of as a hybrid of microcontrollers and DSP processors. Like microcontrollers, DSCs have fast interrupt responses, offer control-oriented peripherals like PWMs and watchdog timers, and are programmed in C. On the DSP side, they incorporate features found on most DSPs such as single-cycle multiply-accumulate (MAC) units, barrel shifters, and large accumulators. It should be noted that not all vendors have adopted the term DSC. The term was first introduced by Microchip_Technology in 2002 with the launch of their 6000 series DSCs and subsequently adopted by most, but not all DSC vendors. For example, Infineon and Renesas refer to their DSCs as microcontrollers.)

DSCs are used in a wide range of applications, but the majority go into motor control, power conversion, and sensor processing applications. Currently DSCs are being marketed as “green” technologies for their potential to reduce power consumption in electric motors and power supplies.

In order of market share, the top three DSC vendors are Texas Instruments, Freescale, and Microchip_Technology, according to market research firm Forward Concepts (2007). These three companies dominate the DSC market, with other vendors such as Infineon and Renesas taking a smaller slice of the pie.