System Sensor
 | This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these messages)
|
 | |
| Company type | Subsidiary |
|---|---|
| Industry | Manufacturing |
| Founded | 1984 |
| Headquarters | , |
Area served | World |
Key people | John Hakanson, President |
| Products | Fire detection and notification devices |
Number of employees | 1,900 |
| Parent | Honeywell International |
| Website | buildings |
System Sensor is an American manufacturer of fire protection equipment. Headquartered in St. Charles, Illinois, System Sensor is a subsidiary of Honeywell International.[1] System Sensor develops and distributes fire alarm devices such as notification appliances, fire detectors, manual initiating devices (pull stations and call points), CO detectors, and more fire protection devices for multiple markets across the globe, and for other Honeywell companies.[2][3]
History
System Sensor was founded in 1984[4] to address the requirements of exclusive industry fire alarm products. Early products included the MASS and PA400 Series. The MASS was a multi-tone device which came in different variants such as a horn/strobe. The System Sensor PA400 was a mini horn. In the 1990’s, System Sensor updated the MASS with an ADA-complaint strobe. Around this time, System Sensor also had a line of smoke detectors, including the System Sensor 1400 and the 2400 2-wire detector. In 1997, the MASS was replaced with the SpectrAlert series. In the 2000’s, System Sensor was acquired from Pitway by Honeywell. Around this time, System Sensor introduced the i3 line of smoke detectors. In 2006, the original SpectrAlert series were replaced with the SpectrAlert Advance. In 2017, the System Sensor L-Series was released. All SpectrAlert Advance products, expect for the outdoor models and mini horns, were discontinued by February 2020. In October of 2023, System Sensor announced the LED L series. The original L Series is planned to be discontinued In Late 2023. [citation needed]
Products
Notification Appliances
MASS Series
The MASS was multi-tone and came in remote horn and horn strobe models as well as remote strobe models, and speaker strobes and remote speakers. The MASS series was originally sold under BRK Electronics and later under System Sensor. It featured a xenon flash tube housed under a translucent white plastic (Dubbed "Frosted Strobes" by enthusiasts). The original MASS series used break off tabs to change the tone meaning that once the tone is changed, it is permanent. The MASS series was later on updated to use jumpers rather than break off tabs. In 1993, System Sensor filed a patent for a new strobe that was ADA compliant. It featured a clear lens and a reflector to distribute the light as well as higher candela options, the minimum being 15 candela. Soon after, System Sensor implemented the ADA-complaint strobe. In 1997, the MASS was replaced by the SpectrAlert series.
PA400 Series
The System Sensor PA400 was a mini horn, with an optional strobe attachment. In 2007, the PA400 series was discontinued and replaced with the MH series sold under the SpectrAlert Advance name.
SpectrAlert Series
The SpectrAlert series was the successor to the MASS series. The SpectrAlert series included horn strobes, strobes, remote horns, chimes, chime strobes, speakers, and speaker strobes. A main feature of these alarms was the ability to sync them using a System Sensor MDL sync module or the System Sensor sync protocol on a supported fire alarm control panel. Three years after the initial release of the SpectrAlert series, System Sensor released the ceiling mount SpectrAlerts. This included horn strobes, remote strobes, speaker strobes, and remote speakers. There were multiple generations of the SpectrAlert. The first generation had a screw lock. The second generation, released in the early 2000s, replaced the screw lock with a clip lock. Approximately before 2006, the third generation was released with multi-candela strobes, and replaced the jumpers for the horn tone with DIP switches. In 2006, the original SpectrAlert series were replaced with the SpectrAlert Advance. A few years after the discontinuation of the SpectrAlert series, fire alarm enthusiasts dubbed the SpectrAlert series as "SpectrAlert Classic" indicating that it is the original SpectrAlert line of fire alarm products. The term became popular and is now being used by most fire alarm enthusiasts today.
SpectrAlert Advance Series
The SpectrAlert Advance was introduced in 2006 to replace the Legacy SpectrAlerts. Its main features were an updated mounting plate wiring design, allowing for easier installation, more candela options, and an updated design. The Advance came in the same models as the original SpectrAlert, with the addition of mini horns, and Low-frequency sounders, which were released in 2014. In 2017, the L-Series was released to replace the SpectrAlert Advance Series. All SpectrAlert Advance products, except for the outdoor models and mini horns, were discontinued by February 2020.
L-Series
In 2017, the System Sensor L-Series was released, replacing the SpectrAlert Advance series. New features included a new 3000 hertz tone, more candela options, lower power draw, and an updated design. The low frequency devices were released in 2018. The new low frequency devices had Temporal 4 for Carbon Monoxide (CO) operations. In October of 2023, System Sensor announced the release of a new LED L series that uses lower current draw, which would replace the Xenon L-Series devices. The Xenon L-Series was discontinued in Late-2023.
L-Series LED
In October of 2023, System Sensor announced the release of a new LED L series that uses lower current draw to replace the Xenon L-Series devices.
Detection Devices
1400/2400 Series
In the 1990’s System Sensor introduced a line of smoke detectors including the System Sensor 1400 2-wire Ionization detector and the 2400 2-wire Photoelectric detector.
i3 Series
In the 2000’s, System Sensor introduced the i3 line of smoke detectors, which came in 2 and 4 wire models. These devices have a feature which they will poll with the fire alarm panel when the sensor is dirty, causing a trouble condition on the panel.
See also
References
- ^ "Companies". Honeywell Life Safety. Archived from the original on 30 December 2014. Retrieved 24 October 2009.
- ^ "Products". buildings.honeywell.com. Retrieved 2023-05-18.
- ^ "Holykell Technology". Retrieved 10 August 2023.
- ^ "About System Sensor". Archived from the original on March 8, 2010. Retrieved 24 October 2009.