User:ASKanetkar/sandbox

Sample Cooler

Introduction:

Sample cooler is a Heat exchanger OR unfired pressure vessel designed to cool hot sample from process to the desired temperature. Samples cooled from sample cooler are either "collected manually for laboratory analysis" OR these samples can be connected to "Online Analyzers" for measurement of Chemical Properties.

Most of the times Laboratory instruments and Online analyzers use very delicate sensors. These sensors cannot handle High temperature and pressure samples. Sample coolers are used to cool sample and to protect downstream instruments.

Following are important aspects while designing sample coolers:

1. Mechanical Design: Sample cooler must be designed to handle high pressure and High temperature of samples. Just to give example Sample cooler used in steam and water analysis system (SWAS) is used to cool Superheated Steam from Boiler which is at temperature as high as 600 Deg C and Pressure 300 Bar.
2. Thermal Designing: This is most important aspect for sample cooler. Sample cooler should able to cool High temperature samples efficiently using Utilities like cooling water, Chilled water or Air.
3. Representative sample: As samples from sample cooler are used for Chemical analysis. It is very important that sample cooler should not effect properties of samples while cooling same.
   1. Material Selection: Material selection should be such as sample or cooling media shall not cause corrosion of sample cooler parts
   2. Size: Sample cooler parts must be design to hold required flow for effective chemical analysis of samples
   3. Drain ability:
4. Safety: Sample coolers are used to protect Operator and instrument & sensors from High Temperature Hazard. Thus sample cooler itself is important component to ensure safety. But, In some abnormal conditions sample cooler may face issues like corrosion, scaling or Failure. Thus it is very important to see that sample coolers can be isolated for maintenance.

Type of sample cooler:

Sample coolers can be classified based on:

1. Cooling Utilities:
   1. Water Cooled
   2. Air cooled
2. Type of Heat Exchanger:
   1. Parallel flow design
   2. Counter flow design
3. Construction:
   1. Helical coil in shell sample coolers:
      • Single Helical Coil
      • Double Helical coil in shell
   2. Spiral coil in shell sample cooler
   3. Shell and Tube sample coolers