Jump to content

Parallel Peripheral Interface

Edit links
From Wikipedia, the free encyclopedia
This is an old revision of this page, as edited by Jawa2006 (talk | contribs) at 21:14, 1 October 2021 (citation added). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

The Parallel Peripheral Interface (PPI) is a peripheral found on the Blackfin embedded processor. The PPI is a half-duplex, bi-directional port that is designed to connect directly to LCDs, CMOS sensors, CCDs, video encoders (video DACs), video decoders (video ADCs) or any generic high speed, parallel device.[1]

The width of the PPI is programmable and can be set between 8 and 16 bits in 1-bit increments. The latest Blackfin family (BF54x) also features an 18/24-bit PPI for direct connection to RGB LCD panels.

The PPI can run from 0 MHz up to 66 MHz.

The PPI has a dedicated clock pin, three multiplexed frame sync pins, and between 16 and 24 data pins.

References

  1. ^ "PPI: Parallel Peripheral Interface [Analog Devices Wiki]". wiki.analog.com. Retrieved 2021-10-01.

http://blackfin.uclinux.org/doku.php?id=ppi


Stub icon

This computer hardware article is a stub. You can help Wikipedia by expanding it.

Retrieved from "https://en.wikipedia.org/w/index.php?title=Parallel_Peripheral_Interface&oldid=1047645651"