Springfield Model 1922
| Springfield Model 1922 | |
|---|---|
 | |
| Type | Bolt action cadet rifle |
| Place of origin | United States |
| Service history | |
| Used by | United States |
| Production history | |
| Designed | 1922 |
| Manufacturer | Springfield Armory |
| Variants | M1922M1 M1922M1 NRA M2 |
| Specifications | |
| Barrel length | 24 in (610 mm) |
| Cartridge | .22 LR |
| Action | Bolt action |
| Rate of fire | User dependent; usually 15 to 25 rounds per minute |
| Feed system | 5-round magazine |
| Sights | Iron sights |
The Springfield Model 1922 is a .22 LR caliber bolt action rifle. It features a 24-inch (61 cm) barrel and a 5-round magazine. It was built as a cadet rifle, designed to mimic the M1903 Springfield rifle for training purposes.[1]
It was produced in several different versions until World War II, when shortages of materials made production of a training rifle impractical.[1]
The M1922M1 variant was introduced in 1925. This version had a new bolt head, an improved firing mechanism, modifications to the chambering, and a new rear sight. The stock was also modified to incorporate a flat based pistol grip.[2]
The M1922M1 NRA variant was introduced in 1927. This rifle basically consisted of the improved M1 version's action in the original 1922 version stock. This version was made for civilian use only and was not purchased by the U.S. military.[2]
The M2 variant was introduced in 1933. This version featured a simplified bolt and a shallower pistol grip on the stock. "M1922" was not included in the M2 cadet rifle's designation.[2]
All versions of the M1922 used what would be the safety lug on the 1903 bolt as the locking lug. Initial problems with this lug cracking drove further development of the M1922 resulting in the final M2 version. The main distinguishing change in the M2 variant was the incorporation of an adjustable headspace mechanism in the locking lug. This mechanism consisted of an Allen key screw that passed through the locking lug bearing against the right rear receiver wall. This headspace screw was locked in place, after adjustment, by a brass pin that bore against headspace screws' threads. the brass pin was not threaded but held in place by a lead plug. The lead plug shows a small eagle that was pressed into the plug by the special tool used by the armorer. If the eagle was disturbed the armorer would know that an attempt had been made to change the headspace by unauthorized personnel.[2]
See also
References
External links
 | This firearms-related article is a stub. You can help Wikipedia by expanding it. |