Wave loading

Wave loading is most commonly the application of a pulsed or wavelike stress to a material or object. This is most commonly used in the analysis of piping, ships, or building structures which experience wind, water, or seismic disturbances.

Examples of wave loading

• Walking on the beach: As one walks through the waves on the beach, as the wave recedes, one feels the sand becomes soft and mushy beneath one's feet, and one sinks in.
• Formation of beaches: Under each wave crest, the sand becomes saturated with water. As each wave trough approaches, the pressure on the sand is reduced, so that water rises from the sand, carrying sand up into the water. Because the water is moving toward the beach at that time, the sand is carried toward the beach by the wave. As the wave recedes from the beach, there is no comparable plumbing action. As a result, there is a net movement of sand up the beach. (Experiment by Douglas Inman and Daniel Conly of the Scripps Institution of Oceanography in La Jolla, CA, as reported in Discover, November 1992, p. 14.)
• Offshore storms and pipes: As large waves pass over buried pipes, water pressure increases above it. As the trough approaches, pressure over the pipe drops dramatically and this sudden and repeated variation in pressure can break pipes.
• Engineering oil platforms: The effects of wave-loading are a serious issue for engineers designing oil platforms, which must contend with the effects of wave loading, and have devised a number of algorithms to do so.
• Earthquakes: An earthquake on 18 November 1929 on the the continental slope off the coast of Newfoundland caused a 60-mile per hour current of sediment and water called a turbidity current which is basically an undrsea landslide. Twelve transatlantic phone cables were snapped in a total of 28 places, sequentially, as the turbidity flow passed. This is really not wave loading, rather an avalanche

Other claimed examples

Within creation science, the term wave loading is also used to describe the liquefaction which occurs during the passage of a wave over sediments, or the temporary conversion of the sediment into a suspension. When a wave passes over a sediment, the weight of the water forces some water below the sand. As the wave recedes, the pressure on the water beneath the sand decreases, allowing the water to flow through the sand back to the surface. As the water pushes up, it converts the sand into a suspension, a process known as liquefaction, and slightly raises the sand particles on the surface.